KNF Laboport N 810 Diaphragm Vacuum Pump

VACUUBRAND VACUU-PURE 10 Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed  (more)5.9 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - No abrasion - No wear parts The dry screw pump VACUU-PURE 10 reliably delivers the benefits of oil-free vacuum technology in the pressure range down to 10-3 mbar. VACUU-PURE 10 combines three important benefits for the user: 100% oil-free, no abrasion, and no wear parts. VACUU-PURE 10 is ideal for clean processes which require a dry and hydrocarbon-free vacuum. The spindles of the screw pump run contact-free and are thus free of abrasion and wear. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. The evacuation of even larger systems from atmospheric pressure down to the 10-3 mbar vacuum range can be done without changing the vacuum pump. VACUU·PURE easily handles high levels of vapor accumulation through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10 Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND ME 4 NT Diaphragm Pump Ultimate Vacuum 70 mbar (52 Torr) Maximum Pumping Speed 2.6 CFM a (more)t 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - ME 4 NT with low vibration and higher pumping speed - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics, allowing a wide range of applications for non-corrosive gases. The one-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 70 mbar. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. The NT-series features further improved performance data. One-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping at modest vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are vacuum ovens, aqueous filtrations and pumping and evacuation of non-aggressive gases in general. The ME 4 NT offers shorter evacuation times and higher gas throughput.INCLUDED: The VACUUBRAND ME 4 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex Chemical Resistant Vacuum PumpThe Scilogex PTFE Chemical Resistant Pump is chemical duty va (more)cuum pumps that can be used in various applications and is ideal for use with Rotary Evaporators. All wetted parts are made of PTFE material and the outer case is processed with squeeze-casting aluminum and anti-rust treatment. An air driven diaphragm and oil-free design will lower both cost and maintenance time. Scilogex 400 PTFE Chemical Resistant Pump Features: - Acid, Alkali & Organic Vapor Resistant - Compact Size & Space Saving CE Approved - Low Noise Level @ 50dB - Various Filtration Applications - Gel Drying, Blotting after Electrophoresis - Centrifugal Evaporator - Solid-Phase Extraction (SPE) INCLUDED: The Scilogex Chemical Resistant Vacuum Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Rotavac Vario Pumping Unit, 115VFully controllable stand-alone pumping unit including vacuu (more)m controller. For use with For Hei-VAP Value and Hei-VAP Advantage rotavapor models. The precise vacuum control prevents bumping and loss of your samples. Thanks to the automatic vacuum supply to the process parameters, you have more time for important laboratory activities. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducing process time by 30 % - Solvent recovery of up to 99 % - Once the required vacuum is reached, the pump automatically stops and reliably keeps the vacuum at the desired level - Minimized runtime saves energy and significantly increases the lifespan of the diaphragm - These pumps guarantee minimum noise and vibrations during operation - Rpm-regulated pumps achieve the most precise vacuum INCLUDED: The Heidolph Rotavac Vario Pumping Unit, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

IKA Oven 125 Control Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 300 °C Ope (more)rating Area Inner chamber 550 x 525 x 450 mm Features - IKA Oven 125: High-performance drying cabinets for precise temperature tasks. - Rapid heating and precise control for reproducible results in labs and research. - 125 l interior with high-quality insulation reduces odours and operating costs. - Heats up to 300°C with enhanced security features for temperature monitoring. - Well-lit interior with up to 6 shelves, automatic fan-off when door opens. - Interface for extra sensor and USB for direct temperature regulation and data storage. - Two TFT displays for process parameters, with intuitive user interface for profiles. - Real-time clock for digital documentation and time-delayed start enhances operation. The models in the IKA Oven 125 dry series are powerfuldrying cabinets for temperature regulation, drying, ageing and heating tasks.Rapid heating and exact temperature regulation guarantee reproducible resultsin industrial laboratories, schools and universities, research, quality controlor science. Thanks to its high quality insulation, the device has a very largeinterior of 125 l in relation to its total volume. This structure also reducesodour emissions and operating costs and ensures excellent temperatureuniformity. The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C.The additional temperature selection limited TWB (DIN 12880) meets the highestsecurity requirements. Furthermore, the temperature curve can be monitored duringtesting independently of the safety temperature. This means that your testmaterial is always protected. A well thought out interior The generously dimensioned interior of the Oven 125 control dry is comfortablyilluminated. A practical cable bushing at the rear of the device is provided asstandard for measurements in the oven or in the test material. The fan switchesoff automatically if the door is open. Up to 6 insertable shelves can beaccommodated in the interior made of stainless steel. Interfaces The Oven 125 control dry offers an interface for an additional sensor fordirect temperature regulation in the test material. Test parameters can bestored directly on a USB stick. Two displays All important process parameters are displayed clearly on two large TFTdisplays. The temperature profiles and individual user profiles can be enteredvia the intuitive user interface. The real-time clock enables convenientdigital documentation and a time-delayed start. Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven includes: - IKA Oven 125 control - dry - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 320 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCD Time setting range1 - 142560 minNumber of trays max.6 Load for one tray max.30 kg Operating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight82 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

IKA lab disc white Speed Range 15 - 1500 RPM Maximum Load 1.5 kg Set-up plate dimensions 100 mm diam (more)eter Features - Modern magnet coil technology ensures reliable stirring. - Wear-free drive with no moving parts for longevity. - High IP protection class (IP 65) for resistance against dust and water. - Chemically resistant materials used for both set-up plate and casing. - Slip-proof stand ensures safety during operation. Ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology. Wear-free drive with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds.INCLUDED: The IKA lab disc white includes: - IKA lab disc white - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark H3565-180-LCI IncuView Integrated Microscop Shelf, 180L (For H3565-180, 180HD and 180HDO2  (more)Only) The Benchmark IncuView Live Cell Imaging system is an expansion to the capabilities of the SureTherm CO2 incubators. A compact microscope integrated with an additional incubator shelf connects to the large, external display, and allows cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on a large, integrated display or viewed locally or remotely with a Wi-Fi enabled phone, tablet, or computer. Additional features include a time-lapse mode for capturing images at user-set intervals for up to 99 days, an enhanced optical system for sharper, crisper images, as well as a fully programmable illuminator for darkfield, brightfield, and high contrast. INCLUDED: The Benchmark H3565-180-LCI IncuView Integrated Microscop Shelf, 180L (For H3565-180, 180HD and 180HDO2 Only) includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty