Zeiss Plan-NEOFLUAR Objective 10x/0.30 Lab

REALUX BK 5000 trinocular microscope - 5 objectives New equipment in its original packaging Model: B (more)K 5000 Trino Trinocular head Eyepieces: WF 10X-20 mm Eyepiece diameter: 23.2 mm XY stage: Size 175 x 145 mm, Movement 78x55 mm - Object guide for 2 blades 3W LED lighting 5 plan-achromatic IOS objectives corrected to infinity: IOS PL ACH 4×/0.10 W.D. = 12.10 mm IOS PL ACH 10×/0.25 W.D. = 4.64 mm IOS PL ACH 20×/0.40 W.D. = 2.41 mm IOS PL ACH 40×/0.66 W.D. = 0.65 mm IOS PL ACH 100×/1.25 (oil) W.D. = 0.12 mm

Kyowa Tokyo Monocular Microscope w/ 3x PO Objectives This was removed from a university lab where it (more) was surplus to requirements. The unit powers on and is in good cosmetic condition. It is in good working order. Included are;3 x Kyowa Objectives: PO A 4/0.10 160 PO A 10/ 0.25 160 PO A 40/ 0.65 160/0.17 All Objectives are in good cosmetic condition. 1 x Eyepiece:WF 10X

*No PAT record* Prior PL012 Binocular Microscope With 4 x Objectives This item was removed from a un (more)iversity lab where it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. Includes 4 x objectives:- EA 100 Oil 1.25 160/0.17 - EA 4 0.10 160/- - EA 10 0.25 160/- - EA 40 0.65/0.17 Also includes 2 x WF 10X/20 Eyepiece. Model: PL012S/N: 57428

Carl Zeiss Axioskop EL Einsatz Microscope This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. Eyepieces:2 x 44 40 32 Objectives:Plan NEOFLUAR 10x/0.30 ∞/0.17ACHROSTIGMAT 40x/0.65 ∞/0.17, 44 01 50Epiplan - NEOFLUAR 50x/0.80 HD 44 23 50 (Some of the text has come off this objective since there was a sticker on it. Removing it must have lifted the print.)

This Nikon Optiphot-2 Microscope was removed from a university lab where it was surplus to requireme (more)nts. The unit powers up and all the objectives appear to focus well. It is in good cosmetic condition with only minor marks from use. There are 4 x Objectives included, and they are as follows; Objectives: Nikon 320081 Japan M Plan 100 1.25 oil 210/0Nikon 140131 Japan M Fluor 40/1.0 Oil 210/0Nikon 350730 Japan M Plan 10 0.25 210/0Nikon 120058 Japan M Fluor 20/0.6oil 210/0 Nikon PSM-2120

CO₂ Control: 0,2 – 20 % Control accuracy in space: ±0,2 % Recovery rate: <=0,8 %/min Required CO₂ pr (more)essure: 0,3 – 0,7 bar Operation temperature: 60°C Temperature deviations in space (at 37°C): ≤0,25°C Temperature deviations in time (at 37°C): ≤0,1°C Relative humidity humidity dish volume: 1,5 L Humidity level (at 37°C, 5°C CO₂): 95% RH Volume: 190 L Internal dimensions (WxDxH): 632 x 440 x 686 mm Dimensions (WxDxH): 765 x 734 x 862 mm Weight: 94.5 kg Equipped with segmented internal door

Memmert IN30 Natural Convection Incubator 32L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 32 L Features - 32 L (1 cu.ft.) stainless steel chamber for compact sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit ensures precise monitoring - ControlCOCKPIT with SingleDISPLAY, featuring an adaptive digital PID-microprocessor controller with high-definition TFT display - Natural convection system for consistent temperature distribution - Electronically adjustable air flap for pre-heated fresh air admixture - Max chamber load of 132 lbs for high-capacity sample handling - Autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety. INCLUDED: The Memmert IN30 Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Ethernet cable with angle connector: scale (HRP, MWSH, MWLH) &ndash; terminal (HY10, PUE5). Cable le (more)ngth: 5 m Compatible with: HRP platform MWSH weighing module MWLH weighing module

Heidolph Hei-TORQUE Ultimate 100 w/ USB &amp; RS232 Interface Overhead StirrerThe Hei-TORQUE Ultimat (more)e 100 is a overhead stirrer with a wide speed range (10 - 2,000 rpm) and a maximum torque of 100 Ncm. It can powerfully stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O).In addition, the Hei-TORQUE Ultimate 100 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC.The overhead stirrer Hei-TORQUE Ultimate 100 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools.*Stand, clamp, and impeller are sold separately*Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 100 w/ USB &amp; RS232 Interface Overhead Stirrer includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Benchmark IPD9600-25S 25ml grinding jar, stainless steel, pack of 2 The Benchmark IPD9600-25S 25ml g (more)rinding jar, stainless steel, pack of 2, are specifically designed for grinding hard samples such as minerals, ores, polymers, and circuit boards. With a volume capacity of 25ml, these jars are a suitable choice for laboratories that require the grinding of small sample sizes. These grinding jars are designed to be used with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer, which is a high-throughput homogenizer that efficiently disrupts samples using grinding balls. The stainless-steel construction of these jars ensures durability and longevity, allowing for multiple uses without the need for frequent replacements. These jars are easy to install and remove from the homogenizer, which streamlines the grinding process and saves valuable time in the laboratory. Overall, the Benchmark IPD9600-25S 25ml grinding jar, stainless steel, pack of 2, are a reliable choice for laboratories that require the grinding of hard samples with a high degree of efficiency and consistency. INCLUDED: The Benchmark IPD9600-25S 25ml grinding jar, stainless steel, pack of 2 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty