MMM CO2CELL 190D Standard CO2 Incubator

Infors Multitron HT Triple Stack Incubator This incubator system was removed from a university labor (more)atory where it was surplus to requirements. The units are in good used cosmetic condition with signs of general use. It has several operational issues affecting its performance: Top Unit: - Cooling system and blower heater are faulty. - Temperature settings are inaccurate: - Set to 1.0ºC, read 9.8ºC. - Set to 37ºC, initially correct but now fails to heat. - Set to 65ºC (Max), unable to maintain temperature; reads as faulty. - Shaker speed sensor is faulty, limiting operation to a maximum of 400rpm. Middle Unit: - The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX). - Shaker speed sensor issues cause erratic operation without displaying current speed. Bottom Unit: - The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX). - Shaker functions up to 230rpm smoothly; above this, it becomes erratic and displays errors. Given the multitude of issues, particularly with the cooling systems, heaters, and shaker speed sensors across all units, this triple stack incubator is listed for spares or repairs. This setup may require significant repairs, or could be used for parts by those capable of addressing these extensive technical issues.

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2005 Tested at 37 ° C and -2 ° C light friction at the stainless steel hooks when closing the door

SANYO MIR-152 refrigerated incubator / oven - with forced convection -10 / 50 ° C Model: SANYO PHCBI (more) MIR 152 refrigerated and ventilated Capacity: 126 liters Temperature range: -10 ° C to 50 ° C Glass on the front Integrated digital temperature display 1 shelf With internal lighting Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 220 W, Internal dimensions: 62 x 38 x 55 cm Overall dimensions: 70 x 58 x 102 cm Weight: 70 kg Tested at 37 ° C and 4 ° C

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V Temperature Range Ambi (more)ent +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 318L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 318L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V includes: - 4 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Kendro Heracell C02 incubator. Air jacket. Capacity 151 L. Temperature range from ambient + 3ºC to 5 (more)5°C. ContraCon 90 ºC decontamination routine. Constant humidity: =/>95%rH. CO2 control range from 0 to 20% by volume. Overtemperature protection. Stainless steel interior with 3 trays and 2 drip trays. Foil control panel with digital display. Interface RS 232. Dimensions (WHD):  internal 470*607*530 mm, external 637*867*760 mm. Power 230 V. 50/60 Hz. 550 W. User manual. The Kendro / Heraeus HERAcell 150 CO2 Incubator is the ideal CO2 incubator for cell and tissue cultures, including development of ova or embryos at or near body temperature. It provides everything needed to protect and grow the user's samples, including safe and stable incubation conditions to ensure optimum culture growth. HERAcell incubators use a ContraCon 90°C decontamination routine which decontaminates the entire chamber interior and is proven to eliminate mycoplasma as well. Also, they are enhanced with an air jacket to maintain temperature uniformity and quick set-up time, as well as direct humidification which offers the fastest humidity recovery times and provides optimal growth conditions for cultures.

This PLANER KRYO 10 Series III BIOMED MR3 K10-22 Freezer Control Unit was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and the printer paper feed seems to be running as it should, though 'PRT CHAMBER FAULT' pops up every few minutes. We have the password for accessing the system. It is in reasonable cosmetic condition with some light marks and rust. There is a large asset tag that could not be removed on the front of the unit that we have covered with black tape.

Memmert BM 400 incubator / oven with natural convection 70°C Capacity: 53 litres Temperature range:  (more)+5°C above ambient to +70°C Inner glass door Integrated digital temperature display 1 stainless steel shelf Power supply: 230 V Frequency: 50-60 Hz Power: 800 W External dimensions (W) x (D) x (H): 55 x 53 x 68 cm Internal dimensions (W) x (D) x (H): 40 x 33 x 40 cm Weight: 35 kg Tested at 45°C (measured 43.8°C)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW