REALUX BK 5000 trinocular microscope - 5 objectives

ZEISS AXIOPLAN 2 laboratory microscope 452185 5 optics / Objectives: 2.5X / 5X / 10X / 20X / 40X Zei (more)ss 440910-9900 N-Achroplan 2.5x/0.07 Zeiss 440920-9900 N-Achroplan 5x/0.13 Zeiss N-Achroplan 10x/0.25 M27 Zeiss 440940-9900 N-Achroplan 20x/0.45 Zeiss N-Achroplan 40x/0.65 M27 Binocular head with Axiophot 2 Adjustable eyepieces Pl 10x/25 444034 230-240V ~, 50/60Hz 100W Halogen lamp Adjustable light intensity With motorized stage and lens support

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit This system was removed from a un (more)iversity lab where it was surplus to requirements. The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp. Due to the faults listed above, this system is listed as Spares/Repair. The system comprises the following:- Leitz Vario Orthomat Controller - Leitz Power Supply for Lamp - Leitz Vario Orthomat 2 Camera - Leitz Wetzlar 100W Lamp (Type: 307-143.003) 5 x Objectives:- NPL Fluotar 6.3/0.20 - NPL Fluotar 16/0.45 - NPL Fluotar 40/0.70 - Leitz EF 63/0.85 - Leitz PL 2.5/0.08 2 x Leitz Eyepieces Periplan GW 10x MModel: Dialux 22-

ISI ABT Scanning Electron Microscope (SEM) ABT-55 This was removed from a university lab where it wa (more)s surplus to requirements. We are told it was in working order prior to being put into storage some time ago Included are; ISA ABT 55 Main Control UnitWith 25cm CRT monitorControl desk with all control switches and buttons Microscope ABT 55 UnitSerial No. K244149Year 1989Controls for vacuum system, not included ETP Sempra Robison Detector Head and Control ModuleModel PSM-11-4Serial No. 524 The main units were not powered up due to no plug on the main power supply unit, it was previously hard wired. The Robinson Detector unit powered on and displayed readiness lights. Accessories:5 x used spare copper columns4 x small aluminium fitting platesOperators Manual4 x 15 amp fusesFilament cartridge

Motic PSM-1000 Trinocular Upright Industrial Microscope, Head Only Objectives Optional Optical Syste (more)m Specialized lenses design, covers the spectrums ranging from the NUV to visible to NIR Illumination Port for fiber-optic coaxial illumination Features - Specialized head design for inspection and laser work. - Can be utilized within semiconductor analysis. - A wide range of objectives available, allowing users to configure the PSM 1000 based on their application's requirements. - Changeover turret for 355nm to 532nm, 532nm to 1064nm spectrums, additionally configured with a 2XVIS magnifier. The PSM1000 Head is an OEM component for the best image results of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by the optional ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope, Head Only includes: - 3 Lens Changeover Turret - Adjustable Nosepiece - One fixed and three adjustable positions - Laser safety kit - Trinocular head - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA Objectiv (more)es APO 2X, 10X, 20X Parfocality Adjustable Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA includes: - APO 2X, 10X, 20X Parfocality Adjustable Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) Objectives  (more) APO 2X, 10X, 20X Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for moulding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) includes: - APO 2X, 10X, 20X Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Pfeiffer Turbo-V 301 Navigator  Model#: 9698918S003 Turbomolecular Pump Lab This was removed fr (more)om a university lab where it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks.

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm Arbor Size: 32mmWheel RPM: 2830 RPM Vice cutting capacity: 80mm - 75mm diameter Safety features: Emergency stop, safety switch, electronic break Coolant connection size: 12.5mm Drain size: 32MM ID 34MM OD Coolant tank size: 23 Litre Power: 3 PHASE - No neutral Dimensions: : 800 x 550 x 450 mm  Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.