IKA RW18 Overhead Stirrer

The ES is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating  (more)protection. Easy to install, resistant and with a small footprint, ES is your best choice for low viscosity samples. Velp ES ensures a smooth start and vigorous agitation even at maximum speed. ES can reach speeds of 1300 rpm and stir up to  15 litres. The device can manage viscosity, with a maximum of  1000 mPas. The easy chuck is easy to close and can accommodate shafts with up to 10 mm diameter and does not require any tool. Stirring speed: 50 – 1300 rpm Maximum stirring volume (H2O): 15 liters Maximum viscosity: 1000 mPas Maximum torque: 15 Ncm Construction material: technopolymer Chuck hole range: 1 – 10 mm Dimensions (WxHxD): 80 x 160 x 200 mm Weight: 1.3 kg

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

OHS 60 Advance is the VELP high-end overhead stirrer designed to guarantee the highest safety standa (more)rds. The resistant sealed housing and the IP 54 Protection Rating guarantee durability even in the most aggressive environments. Integrated overload, overtemperature, and overcurrent safety alarms will preserve the performance over time by stopping the stirring Safe start and stop knob operation and lock key avoid unintended start up and changes of the working conditions. Integrated vibration sensor with different levels of sensitivity will stop the operation and inform you to be sure that your OHS is stable and properly fixed. Display: 3,5″ Graphic TFT Display User interface: Digital Motor: Brushless DC Stirring volume (H₂O): Up to 40 L Speed gears: 1 Max torque: 60 Ncm Stirring speed range: 30 – 2000 rpm Speed setting resolution: 1 rpm Speed control: Digital Max viscosity: 50000 mPa*s Torque compensation: SpeedServo Chuck range: Ø from 1 to 13 mm Shaft diameter pass-through: up to 8.5mm Safety vibration sensor: Yes Timer: Yes Method setting: Yes Lock of the instrument: Yes External probe connection: Pt100 (not included) Temperature measurement range: -200 to +550°C Temperature resolution: 0.1°C Interfaces: USB / WiFi Dimensions (WxHxD): 900 x 315 x 235 mm Weight: 4,6 kg Included: Stirring shaft with turbo propeller (Stirring shaft that generates an axial flow in the container with the suction of the substance from the top towards the bottom) Stirring shaft with anchor (Stirring shaft that generates a tangential flow with high shearing forces on the ends. The flow generated limits the possibility of sedimentation on the walls of the container)

The Hei-TORQUE 100 is a overhead stirrer with a wide speed range (10 – 2,000 rpm) and a maximum torq (more)ue of 100 Ncm. With it you can optimally stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O). The Hei-TORQUE 100 performs every stirring task with minimal noise thanks to the latest engine technology. This overhead stirrer is also very user-friendly in terms of operation and safety. The 2.4 inch display makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools. Rotation speed range: 10 – 2000 rpm Rotation speed indicator: digital Speed control: electronic Maximum torque: 100 Ncm Torque indicator: symbol Overheat protection: automatic cut-out Maximum viscosity: 60000 mPa s Stirring capacity (H2O): 50 l Throught-shaft design: yes Maximum shaft diameter: 10.5 mm Including tripod and a PR 31 Ringed Pitched-Blade Impeller Due to its blade dimensions, the ringed pitched-blade impeller PR 31 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: Ideal vessel diameter: 83 – 165 mm Ideal ground clearance: 17 – 33 mm Ideal filling level: 83 – 165 mm Ideal volume: 400 – 3500 ml The ringed pitched-blade impeller PR 31 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.

Range 1: 60 – 500 rpm Range 2: 240 – 2000 rpm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Food scale Valor 2000 Ohaus The OHAUS Valor 2000 waterproof food scale is a unique tool of its kind, (more) thanks to a winning combination: speed and duration. Available with both stainless steel and plastic armor, Valor 2000 features two large LED displays, one front and one rear, food safety and puncture-resistant keyboards, elements that help make it a perfect tool for dry or humid environments.Cut-resistant keyboard prevents damage caused by sharp objects - Flow-Thru waterproof design, IP68, for weighing liquids and more in the wettest environments - Speed ​​and double display: several operators can work at the same time - The Valor 2000's unique IPX8 Flow-Thru design, NSF certified, allows the balance to drain moisture when used in humid environmental conditions. - The sturdy polycarbonate keyboard provides valuable protection from knives and other sharp tools used in food preparation, processing and portioning applications. - The stabilization time is less than half a second. Large front and rear LED displays allow for easy weight viewing, allowing two operators to share a single scale. Applications Weighing, checkweighing (inox models only) Display Double LED display Operation AC adapter (included) or rechargeable battery (included) Communication N/A Structure ABS armor with stainless steel platform (stainless steel models: armor and platform in stainless steel), front leveling indicator Construction features Self-closing power socket cover, carrying handle

Expanded bed adsorption (EBA) is a single pass operation to recover target molecules such as protein (more)s from crude stock feedstock without prior clarification. In extracellular processes, EBA is effective in capturing molecules from fermentation or cell culture. In intercellular processes with soluble molecules, it is suitable for use with broth from cell lysis or homogenization. Streamline columns are specially designed for use with Streamline adsorbents. Column design incorporates spacial flow distributors and a moveable adaptor. The distributor at the bottom of the column creates the stable fluidized bed required for the technique. The moveable adaptor allows the bed height to be adjusted for elution in sedimented bed mode. Diameter: 25 mm Column cross section: 491 mm2 Tube height: 1000 mm Stand foot print: 430 x 430 mm Sedimented bed height: 150 – 300 mm Sedimented adsorbent volume: 75 – 150 mL Max pressure: 1 bar Operating temperature: 4°C to 40°C Feed application: 200 – 400 cm/h Elution sedimented bed: 50 – 150 cm/h Elution expanded bed: 100 – 300 cm/h Chemicals used with Streamline 100 column: Acetic acid: Concentration – 25%, pH = 1.8; Time/cycle – 3 h Acetone: Concentration – 2%; Time/cycle – 15 min Ammonium sulphate: Concentration – 2 M; Time/cycle – 5 h Ethanol: Concentration – 20%; Time/cycle – 24 months Ethanol: Concentration – 70%; Time/cycle – 1 h Ethanol/Acetic acid: Concentration – 20%/10%; Time/cycle – 3 h Ethylene glycol: Concentration – 50%; Time/cycle – 3h Guanidine-Hydrochloric acid: Concentration – 6 M; Time/cycle – 5 h Glycerol: Concentration – 10%; Time/cycle – 3 h Hydrocloric acid: Concentration – 0.1 M, pH = 1; Time/cycle – 1 h Isopropanol: Concentration – 30%; Time/cycle – 3 h Sodium acetate/Ethanol: Concentration – 0.2 M/20%; Time/cycle – 24 h Sodium chloride: Concentration –  0-3 M; Time/cycle – 3 h Sodium hydroxide: Concentration – 2 M, pH = 14; Time/cycle – 24 h Sodium hydroxide: Concentration – 0.01 M, pH = 12; Time/cycle – 12 months Sodium sulphate: Concentration – 1 M; Time/cycle – 3 h Triton X 100: Concentration – 1%; Time/cycle – 5 h Tween: Concentration – 1%; Time/cycle – 5 h Urea: Concentration – 8 M; Time/cycle – 5 h

Dimensions (HxWxD): 760 x 560 x 520 mm Internal drawer dimensions (HxWxD): 100 x 470 x 420 mm

Nahita Blue Multibas+ centrifuge. Digital control. Swing-out rotor included (adapters not included). (more) max speed 5000rpm. Max RCF 4980g. Maximum capacity: 4x100 mL. Adapters for different types of tubes; available heads for microtiter plates and for 250 mL vessels Timer: 1 h 59 min 59 s. 10 acceleration ramps. 10 braking ramps. 9 programs. pulse function. Maintenance free induction motor. All heads and adapters available are autoclavable. Backlit LCD display. Sound level ≤ 65 dB. End of centrifugation or error detection warning alarm. Air circulation system to avoid excessive increases in temperature in the inner tank. Electronic or manual opening of the lid in case of mains failure. Power supply: 220V/50-60Hz. Consumption: 440W. User manual. ATTENTION: price of the adapter buckets for each type of tube NOT included in the price. Contact with your specific need for a quote. The new Nahita Multibas+ centrifuge model has been developed from the Multibas model with improvements in the head design for greater safety during centrifugation, and with the addition of an optional head to centrifuge containers of up to 250 mL, increasing the applications of the equipment. The Multibas+ centrifuge is therefore a large-capacity tabletop model with an oscillating head, especially suitable for use in various fields such as medicine, biology, veterinary medicine, chemistry, genetic engineering or immunology. Thanks to the multiple adapters with which it can be used, it offers great versatility of use, becoming an essential element in routine laboratory work.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW