Heidolph Overhead Stirrer Stand Base 38mm Diameter

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 100 Advance is the ideal solution for demanding applications operating with viscosities up to 70,000 mPa. The electronically controlled brushless motor of the OHS 100 Advance agitates up to 100 l (H2O) with a maximum torque of 100 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V Speed Range 30 rpm to 2,000 rpm Capacity 2 (more)5 L Maximum Viscosity 25,000 mPas Features - Powerful mixing and constant speed is assured with the brushless motor and torque compensation technology - Delivers accurate, controlled stirring of viscous liquids with quiet operation. - Simplify set up with the Keyless Chuck - no tools required. - Change shafts quickly and easily with one handed operation. This unique design will save time and effort for everyone in the lab. - Designed for safety. The lock button prevents accidental speed changes and the motor’s overload sensing technology simply shuts off stirring before an overload condition occurs to protect the sample. - Compact and easy to use. - Simple knob control combined with the bright digital display allows for precise setting and monitoring. - Customize for your application with over 12 accessories. The OHAUS e-A51ST040 Achiever 5000™ Overhead Stirrer is designed for powerful, precise stirring, safety, and simplicity in your lab applications. The A51ST040is a versatile overhead stirrer ideal for various applications in laboratories across industries like food & beverage, cosmetics, paints & coatings, pharmaceuticals, and more. INCLUDED: The Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Nanostar 7.5 Digital Overhead Stirrer Stirring quantity max. (H2O) 5 L Speed Range 0/50 - 2000 (more) rpm Viscosity max. 4000 mPas Features - Compact and lightweight design, weighing just 0.8 kg for easy handling and space-saving in the laboratory. - Constant torque throughout the speed range (50 - 2000 rpm), ensuring consistent performance for various applications. - Brushless DC motor with efficient operation and minimal maintenance requirements. - User-friendly operation via a stable rotary knob with an LED display for clear speed indication. - Includes a USB interface for convenient software updates, enhancing functionality over time. The IKA Nanostar 7.5 Digital Overhead Stirrer combines compact design with powerful performance, ideal for laboratories where space efficiency is crucial. Weighing just 0.8 kg and 30% smaller than its predecessor, the Nanostar 7.5 maintains high torque and precise stirring capabilities across its speed range from 50 to 2000 rpm. Featuring a brushless DC motor, it offers reliable operation and minimal maintenance. User-friendly controls via a rotary knob and LED display ensure ease of operation, while a robust housing ensures durability. With a USB interface for quick software updates, the Nanostar 7.5 is designed to meet the evolving needs of modern laboratory environments. INCLUDED: The IKA Nanostar 7.5 Digital Overhead Stirrer includes: - NANOSTAR 7.5 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Nanostar 7.5 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)5 l Motor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 2000 rpmViscosity max.4000 mPasOutput max. at stirring shaft15.7 WPermissible ON time 100 %Torque max. at stirring shaft 7.5 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.075 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)53 x 147 x 130 mmWeight0.8 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mARequest a Formal Quote

IKA Eurostar 60 Control Overhead Stirrer Speed Range 0/30 to 2000 RPM Viscosity Max. 50,000 mPas S (more)tirring Quantity Max. 40 l Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included indelivery Universal laboratory stirrer designed with a removable wirelesscontroller and a digital TFT display. It automatically adjusts the speedthrough microprocessor controlled technology within the speed range of 0/30 -2000 rpm. The stirrer comes equipped with a RS 232 and a USB interface tocontrol and document all parameters. An integrated torque trend display isprovided for the measurement of viscosity changes. Safety circuits installedensures automatic cut-off in an anti-stall or overload conditions. Continuouscomparison of shaft speed to desired speed is maintained and variations areadjusted automatically. This guarantees a constant speed even with changes inviscosities of the sample.

Heidolph Hei-TORQUE Ultimate 400 w/ USB & RS232 InterfaceThe Hei-TORQUE Ultimate 400 laboratory  (more)stirrer is ideal for the powerful stirring of viscosities up to 250,000 mPas or volumes up to 100 liters (H2O). Thanks to its 2-gear stage design, it stirs particularly powerfully in the speed range up to 400 rpm and is therefore particularly suitable for applications with highly viscous media that require mixing in the lower speed range. However, operation at speeds of up to 2,000 rpm is also possible in the second speed. In addition, the Hei-TORQUE Ultimate 400 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC. The laboratory stirrer Hei-TORQUE Value 400 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 400 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 400 w/ USB & RS232 Interface includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) Particularly in the case o (more)f applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, and ideal volume: 1,90 -6,300 ml. This VISCO JET® 80 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W

The Defender 3000 is the ideal choice for weighings that require high resistance. Available with a s (more)quare or rectangular platform (available in five sizes), they feature a unique combination of value, quality and strength that any business can rely on. IP65: The upper junction box made of stainless steel is protected from dust and water Indicator: Backlit LCD display with large easily visible digits, piece counting weighing mode, weight summation and an RS232 interface. Applications Weighing, Piece Counting, Weight Control, Summation, Display Hold Display 7-segment 6-digit LCD display with high contrast white LED backlight, digit height 25 m Operation AC adapter (included) Communication Easy access communication port with RS232 interface (included) Structure Indicator with front in ABS and rear in painted carbon steel and mounting bracket, threaded platform in black painted steel, IP65 junction box in stainless steel, fixed top plate with a thickness of 5 mm, 4 load cells in steel alloy H8C IP67 OIML R60 approved, pit frames and ramps (accessories sold separately) Construction features Overload protection up to 150% Technical features: Maximum capacity 1500 kg Resolution 0,5 kg Battery life 58 hours with rechargeable battery Authorization for trade: CE type approved Platform structure: Painted steel diamond plate Power supply: AC power supply (included); Rechargeable battery (included) Tare range: At flow by subtraction Unit of measurement: Gram; Kilogram; Ounce; Pound: Ounce

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA C-Mag HS 7 Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range 50 to 50 (more)0°C Stirring Quantity Max. 10 l Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 7 Magnetic Hotplate Stirrer features one stirring position with a maximum stirring quantity of 10 liters (H2O). It is equipped with a powerful motor with an output of 1.5 W and a speed range of 100 - 1500 rpm. The heat output is 1000 W, and it offers a heating temperature range from 50 to 500 °C. The set-up plate, made of chemical-resistant ceramic, measures 180 x 180 mm. The stirrer includes an LED temperature display for both set and actual values, a turning knob for heat control, and a fixed safety circuit of 550 °C. Additionally, it has a Hot Top indicator for safety and a bushing for connecting an external temperature sensor (ETS-D5). The dimensions are 220 x 105 x 335 mm, and it weighs 5 kg.