Heated magnetic stirrer IKA RCT Basic safety control

Sample preparation stirrer OHAUS Guardian 7000 Magnetic Hotplate Stirrers are designed with exceptio (more)nal safety features and top performance for every application. All models feature the unique SafetyHeatTM, an industry-leading internal protection system that ensures safety in heating applications through dual system integrity monitoring. The bright LCD display features intuitive icons, temperature, speed and duration settings, all designed to monitor performance from every corner of the lab. Numerous cutting-edge Ohaus features: - SmartHousing ™: Innovative chemical resistant, easy to clean design that allows you to channel potential spilt liquid samples away from internal components and the glass control panel. - SmartPresence ™ and SmartLink ™: they automatically turn off the heater if no user is detected after the 'time out' period set by the user or if the bluetooth no longer detects any smartphone connected. - SafetyHeat ™: two independent safety controls constantly monitor the electronics and turn off the heating to prevent overheating. - Powerful Motor: A solid magnet and software-controlled ramp speed ensure stirring accuracy from 60 to 1,600 rpm. for secure magnetic coupling for viscous applications. - SmartHeat ™ and SmartRate ™: set the maximum unit temperature and rapid or slow rates of temperature and speed change. The scheduling function allows the storage of five multi-stage programs. Available models: E-G71HS07C model with small square plate: 178 x 178 mm; flow rate of 15 litres; ceramic plate; heating up to 500°C. E-G71HS10C model with large square plate: 254 x 254 mm; flow rate of 18 litres; ceramic plate; heating up to 500°C. e-G71HSRDM model with round plate: 135Ø mm; flow rate of 20 litres; aluminium plate; heating up to 380°C. Applications Thermosensitive chemistry and biology, heat fixation, solution pH optimization, solution sterilization, endothermic reactions, denaturation of organic material, preparation of samples and solutions, buffers and solubilization reagents, preparation media, boiling Display Backlit LCD display for temperature, speed and time, green indicator lights during the heating and shaking phases, hob over-temperature indicator, icons for SmartRateTM, SmartHeatTM, SmartPresenceTM, SmartLinkTM, probe in use and Adjustment of a single point Operation and accessories included Mains cable (included), 20.3 cm (8 ') stainless steel RTD temperature probe, 3.8 cm (1.5') PTFE coated stir bar, protective hood in use Communication The USB port can be used to program repetitive applications and increase safety thanks to SmartLinkTM technology; the long-range user detection function operated via the OHAUS Bluetooth dongle accessory (sold separately) Structure Probe connection, SmartHousingTM is heat insulated and chemical resistant, IP21 rated, tempered glass front panel, control knobs, On / Off switch to disconnect the heater, integrated support rod holder, ceramic plate or in aluminium easy to clean Construction features Temperature indicator light, audible alarm, SmartHeatTM temperature limitation function, SafetyHeatTM stops the heater in the event of a malfunction, temperature calibration function for five probes and five plate setpoints, temperature priority function, SmartRateTM functions

IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological (more) and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Digital Display, Better Communication and High Repeatability Simple and extremely bright digital display, easy to read and practical, with all the most important parameters such as stirring speed, time and operating mode shown on the main screen. Improved communication translates into greater efficiency. High stability on the bench 4 non-slip feet and zamak base guarantee considerable stability on the bench, making the instrument usable on many surfaces. The highly innovative ergonomic design also plays a major role.

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

Scilogex OS20-Pro Overhead LCD Digital StirrerThe Scilogex OS20-Pro Overhead LCD Digital Stirrer fea (more)tures a maximum capacity of 20L, accurate microprocessor stirring speed control guarantees speed precision, anti-spill microprocessor control slow start up prevents sample spills, a through-shaft design allows for easy adjustment of the impeller position, LCD display and control, set value and actual value can be displayed for real-time monitoring of torque and speed. Click Here to View Product Video INCLUDED: The Scilogex OS20-Pro Overhead LCD Digital Stirrer includes: - Key of Drill Chuck - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 1311 Turbine Stirrer For drawing the material to be mixed from above. Generates axial flow in (more) the vessel. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 30 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1311 Turbine Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

The VELP stirring rod with turbo propeller is ideal for medium/high viscosity ranges and medium/high (more) speeds. Compatible with Velp Scientific ES, LS, DLS, LH, DLH, PW, OHS pole stirrers. The stirrer shaft generates an axial flow with top-down suction of media and low shear forces.

The world's first patented Tube Mill control is a batch mill with disposable grinding chamber. Elimi (more)nates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.- Clearly arranged, multilingual OLED-display- Timer, adjustable from 5 s to 3 min- USB interface for control and documentation of all the parameters- Interval operation available- Infinitely variable speed from 5000 to 25000 rpm- Various operating modes- Adjustable safety speed- Adjustable safety time- Programmable and storable test conditions- Error Code Display- Reproducible test results- Easy operation with touch keypad- Dust proof sealedWeight - 5KGDimensions - 35cmL x 26cmW x 46cmH

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

KNF IP65 FEM 1.02 ST.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 ST.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Pette Vario 20 - 200ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 20 - 200ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 20 - 200ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range20 - 200 µlIncrements0.2 µlAccuracy (Nominal Volume µl / %) ± 1.2 µl / 0.6%Precision (Nominal Volume µl / %)± 0.4 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 1 µl / 1%Precision (50% of Nominal Volume µl / %)± 0.3 µl / 0.3%Accuracy (10% of Nominal Volume µl / %)± 0.5 µl / 2.5%Precision (10% of Nominal Volume µl / %)± 0.14 µl / 0.7%

Type of Movement Orbital Speed Range 0 to 3,000 RPM Shaking Stroke 4.5 mm Features - Wide range of a (more)ttachments - Attachment detection - Continuous or touch operation (with standard attachment) - Stable in all speed ranges - Sturdy zinc die cast casing