KNF IP65 FEM 1.02 ST.18S Liquid Pump

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Adjustable number of revolutions. Technical specifications: Dimsensions (D)x(H)x(W): 20,3 x 9,7 x 15 (more),3 cm.

This item has just arrived in our stock. Please enquire for further details.

VACUUBRAND ME 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar (52 torr) Maximum Pumping Spee (more)d 2.6 cfm at 60Hz Number of Heads/Stages 2/1 Features - Outstanding chemical resistance - High performance even at low vacuum levels - Whisper quiet - Low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The NT-series features further improved performance data, higher tolerance for condensates and simplified maintenance. The ME 4C NT is also available as chemistry vacuum system ME 4C NT +2AK with inlet separator to protect the pump against particles and liquid droplets, plus outlet separator to collect condensate. One-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. They do not consume water and therefore do not produce any contaminated waste water. Typical applications are filtration as well as concentration of solvents with low boiling points. The ME 4C NT is recommended for processes which require higher flow rates. The chemistry vacuum system ME 4C NT +2AK with inlet separator and condensate catchpot is an excellent choice for rugged applications and for collecting condensates at the exhaust of the pump.INCLUDED: The VACUUBRAND ME 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 ST.18RCP2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to sui (more)t most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 ST.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R4HF Four Channel, High Flow The Gilson MINIPULS 3 Peristal (more)tic Pump Head, R4HF Four Channel, High Flow is a versatile high flow pump head with a maximum flow rate of 250 ml/min and a minimum flow rate of 1 ml/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4HF Four Channel, High Flow includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

600ML beaker low form DURAN / SCHOTT DURAN low form 600 ml beakers are made of 3.3 borosilicate glas (more)s - DIN ISO 3585). Quantity available: 2

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz Collector Temperature  (more) -85°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz includes: - Vacuum Hose - 2 x Hose Clamps - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Eurostar 100 Control P4 Overhead Stirrer Speed Range 10 - 300 RPM Viscosity Max. 100,000 mPas  (more)Stirring Quantity Max. 100 l Features - Reverse function - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Quiet operation - Error code Display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery The extremely powerful laboratory stirrer EUROSTAR 100 control P4 with a removable wireless controller and a digital TFT display is especially suitable for highly viscous applications and provides a torque of up to 320 Ncm. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/10 - 300 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. Furthermore, an integrated torque trend display is provided for the measurement of viscosity changes and its electronic safety circuit ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 100 Control P4 Overhead Stirrer includes: - EUROSTAR 100 control P4 - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 100 Control P4 Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)100 lMotor rating input174 WMotor rating output142 WMotor principleBrushless DCSpeed displayTFTSpeed range10 - 300 rpmReversible direction of rotationyesIntermittent operationyesViscosity max.100000 mPasOutput max. at stirring shaft 100 WPermissible ON time 100 %Torque max. at stirring shaft 320 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 10 mmFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque3.20 NmTorque measurementtrendDeviation of torque measurement I30 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 352 x 230 mmWeight5.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input150 W DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote