Vibration stirrer TX4 Vortex Mixer Velp with IR sensor

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

Chart MVE 500 Series MVE510AF-GB Liquid Nitrogen Tank Dewar This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and we have the password available. We were unable to test it further. It is in good cosmetic condition with marks from use. Model no. MVE510AF-GBRef - 11905075SN - CAB2111410005 Internal dimensions - D91 x W52.5cm6 x Triangular storage holders sized 22 x 23 x 64cm (Blue spacers inside drawers)

Shimadzu PSSM-8 Peptide Synthesizer w/ Memory Key, System Disk & Accessories Lab This was remove (more)d from a university lab where it was surplus to requirements. The unit is in good cosmetic condition internally and externally. It powers with the arm moving in the X/Y Axis using the onboard control panel, we are unable to test it further at our facility. Included are the following: Shimadzu PSSM-8 Peptide SynthesizerModel: PSSM-8Serial#: 310059 PSSM-8 Memory CardPart#: 292-05230 PSSM-8 System DiskPart#: 292-05108 Shimadzu BMD-1 Memory Card DriveModel: BMD-1Serial#: 310059 PSSM-C8 Cleavage Purge Unit Shimadzu Needle Part#: C 228-20243-94 Millex-LS syringe Driven Filter UnitPart#: SLLS 025 NS Shimadzu PSSM-8 Instructional Manual

Memmert IF110 Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 108 L (3.8 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF110 Forced Circulation Incubator 108L, 115V is designed to provide precise temperature control and reliable performance for laboratory applications. With a setting temperature range from +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures stable thermal conditions for a wide variety of processes. Its spacious 108L (3.8 cu.ft.) chamber is constructed with reinforced stainless steel, offering both durability and easy cleaning. The advanced ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, featuring a high-definition TFT-color display, allows for easy adjustments to critical parameters like temperature, fan speed, air flap position, and program time. The IF110 also prioritizes safety with an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meets protection class 1 standards according to DIN 12880. Forced air circulation, powered by a quiet air turbine adjustable in 10% steps, ensures uniform temperature distribution, while the pre-heated fresh air admixture feature allows for greater environmental control. Additional functionality includes the AtmoCONTROL software for programming and data management via Ethernet or USB. With a maximum chamber load of 385 lbs and each shelf supporting up to 44 lbs, the IF110 incubator is a reliable and efficient solution for demanding laboratory environments. INCLUDED: TheMemmert IF110 Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA A11 Basic Analytical Mill Operating Principle Cutting / Impact Max. Speed 28,000 RPM Feed Hard (more)ness Max. 6 Mohs Features - Moist and gluey materials can be pulverized by adding water - Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80 ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber - Optionally, a 250 ml grinding chamber is available - Can cool mill feed with dry ice or liquid nitrogen for processing sensitive materials. - Small footprint with high performance, ideal for laboratory use. The IKA A11 Basic Analytical Mill is a versatile batch mill designed for two different grinding procedures. It features impact grinding for hard, brittle, or non-elastic materials using a high-grade stainless steel beater, suitable for materials with a Mohs hardness up to 6. It also supports cutting grinding for pulverizing soft, fibrous materials with an optional cutting blade. The mill can pulverize moist and gluey materials by adding water and includes an 80 ml Tefcel (PTFE, glass fiber-reinforced) grinding chamber with a stainless steel inlet, with an optional 250 ml chamber available. Capable of cooling the mill feed with dry ice or liquid nitrogen, it operates at a maximum speed of 28,000 rpm with a circumferential speed of 53 m/s. The compact design measures 85 x 240 x 85 mm and weighs 1.5 kg, making it suitable for laboratory environments with temperatures from 5 to 40 °C and humidity up to 80%. The A11 Basic Analytical Mill offers precise and efficient grinding with a motor rating input of 160 W and output of 100 W, ensuring reliable performance for various grinding applications.INCLUDED: The IKA A11 Basic Analytical Mill includes: - A 11 basic Analytical mill - A 11.1 Spare beater - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA A11 Basic Analytical Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input160 WMotor rating output100 WSpeed max.28000 rpmCircumferential speed max.53 m/sUseable volume max.80 mlFeed hardness max.6 MohsFeed grain size max. 10 mmMaterial beater/cutter stainless steel 1.4034Material milling chamber stainless steel 1.4571Power-ON time1 minPower-OFF time10 minMill feed can be cooled in milling chamber with dry iceyesMill feed can be cooled in milling chamber with liquid nitrogenyesDimensions (W x H x D)85 x 240 x 85 mmWeight1.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 43Voltage220 - 230 / 100 - 115 VFrequency50/60 HzPower input160 W