KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

Lot of Cole Parmer Pump Drives, Heads &  Liquid Level Interface. These were removed from a  (more)university lab where they were surplus to requirements. Included are; 1 x  Pump Drive: Model No. 7544-06 Speed 6rpmThe unit powers on and is in good cosmetic condition. The motor moves smoothly. We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed. 1 x Pump Drive: Model No. 7544-20 Speed 20rpmThe unit powers on and is in good cosmetic condition. The motor moves smoothly.  We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed. 1 x Liquid Level Interface  Model LI-08/B01 The unit is in good cosmetic condition. 2x Pump Heads:Model No. 7014-20Part No. 3.358.609 2x Masterflex Norprene tubingModel No. 6404-14

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pump (more)ing Speed 1.65 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent chemical resistance The MZ 2C VARIO select pump is an excellent solution for labs working with most common solvents. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU-SELECT controller detects the boiling pressure and automatically adjusts the pump to maintain process control. On-demand motor speed control yields not only improved vacuum control, but it also results in unparalleled service intervals for wear parts like diaphragms and valves. Typical applications are all evaporation processes. Evaporation processes can be run fully automatically and with short process times and high sensitivity at the same time. The VARIO control ensures high process reliability through prevention of superheating or foaming. The control allows for automatic vacuum level adaptation and is self-adapting to changing process parameters at any time. The VACUU-BUS interface facilitates a user-friendly configuration of even complex vacuum installations. INCLUDED: The VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MVP 10 Basic Vacuum Pump Pump Rate Max. 1.7 m³/h (28.3 l/min) Ultimate Vacuum 7 mbar Protection (more) Class IP 54 Features - Designed for dry, oil-free applications with a diaphragm pump made of PTFE or PTFE compounds for chemical resistance. - Slimline, compact design ensures space-saving installation and long service life. - Simple maintenance and straightforward servicing for ease of use. - Operates quietly at 65 dB(A), suitable for laboratory environments. - Includes a gas ballast valve for handling condensable vapors and preventing pump oil contamination. The IKA MVP 10 Basic Vacuum Pump is an essential tool designed for dry, oil-free applications in laboratory settings. Featuring a robust diaphragm pump constructed from PTFE and PTFE compounds, it ensures exceptional chemical resistance and reliability. Its compact, space-saving design and quiet operation at 65 dB(A) make it ideal for environments where noise levels are a concern. Simple maintenance procedures and a gas ballast valve for managing condensable vapors further enhance its usability, making the MVP 10 a dependable choice for various vacuum applications. INCLUDED: The IKA MVP 10 Basic Vacuum Pump includes: - MVP 10 basic vacuum pump - Vacuum hose - Silencer - Y hose connector 8 mm - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA MVP 10 Basic Vacuum Pump SpecificationsPump rate max. (50/60Hz)1.7 m³/hPump rate max. (50/60Hz)28.3 l/minFinal pressure without gas ballast7 mbarFinal pressure with gas ballast15 mbarSuction levels2Cylinder2Connection diameter suction side10 mmConnection diameter pressure side10 mmGas ballast valve yes Input pressure 7 - 1050 mbarSpeed (50Hz)1380 rpmSpeed (60Hz)1680 rpmNoise at low. pressure65 dB(A)Mode automaticyesMode manualyesMode pump %yesMode programyesDimensions (W x H x D)245 x 155 x 320 mmWeight11.5 kgPermissible ambient temperature10 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54Voltage230 / 115 / 100 VFrequency50/60 HzPower input180 W

Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel The Gilson MINIPULS 3 Peristaltic Pump Hea (more)d, R8 Eight Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT400D - ISO160 160W Turbomolecular Pump Ultimate Vacuum 1x10-8 mbar Inlet Connection DN16 (more)0ISO-K Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - ISO160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) Ne (more)w equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

Ohaus AX125D Adventurer Semi-Micro Analytical Balance, 82 g/120 g, 0.00001 g/0.0001 g Maximum Capaci (more)ty 82 g / 120 g Readability 0.00001 g / 0.0001 g Repeatability (Typical) 0.00002 g / 0.0001 g Features - AutoCal™ ensures precise, consistent calibration with no manual effort - Compact draftshield provides easy access and reduces bench space - 4.3" touchscreen offers intuitive controls and adjustable brightness - USB ports enable seamless data transfer and regulatory compliance - Stainless steel pan ensures long lasting durability across research applications - Power-saving features reduce energy use and operational costs - Real-time clock supports GLP/GMP compliance with accurate timestamps - User management secures data with three customizable access levels The Ohaus AX125D Adventurer Semi-Micro Analytical Balance, 82 g/120 g, 0.00001 g/0.0001 g, delivers precise and reliable performance for a wide range of weighing applications. Featuring AutoCal™ technology, it ensures consistent calibration with minimal effort. Its compact draftshield design optimizes workspace efficiency, while the 4.3" full-color touchscreen provides an intuitive and customizable user experience. Dual USB ports enable easy data transfer and support compliance with regulatory standards. Additional highlights include power-saving features, a real-time clock for GLP/GMP compatibility, and a three-level user management system, making it a versatile and dependable tool for laboratories, educational institutions, and industrial settings.INCLUDED: The Ohaus AX125D Adventurer Semi-Micro Analytical Balance, 82 g/120 g, 0.00001 g/0.0001 g includes: - Wind Ring - Draftshield - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Esda 2 Electrostatic Detection Apparatus with Document Humidifiers Lab This was removed from a unive (more)rsity lab where it was surplus to requirements. The system powers up but has not been tested. It is in reasonable cosmetic condition but has marks from use and age.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Ohaus 30400171 Modular Heat Block, 96-well PCR Plate The Ohaus 30400171 Modular Heat Block, 96-well  (more)PCR Plate is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400171 Modular Heat Block, 96-well PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty