KNF Laboport N 86 KT.18 Vacuum Pump

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a univer (more)sity lab where it was surplus to requirements. Included are; PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up. PFEIFFER Controller:Model TC100Mod no. PM C01 692A The unit is in good cosmetic condition

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

KNF LIQUIPORT IP65 NF 1.100 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Sucti (more)on Height (max.) 3 mWg Pressure (max.) 4 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz - Output signal fault alarm - Cable for external control included Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and analog controls. INCLUDED: The KNF LIQUIPORT IP65 NF 1.100 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Cable for external control - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 KT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 KT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirem (more)ents. The unit had previously been in use up until the day it was removed. It was replaced with a new system. It is fully working. The unit powered on with no problems at our facility. It is in excellent cosmetic condition. It comes supplied with the PSU, USB lead, software CD, manuals and data books.

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 10 g.

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

Ohaus HB2DG Digital Dry Block Heater, 2 Block Temperature Range Ambient +5°C to 120°C Control Digita (more)l Uniformity Within the Block ± 0.1°C at 37°C Features - Offers accurate and fast sample heating with PID microprocessor temperature control - Supports two interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Equipped with a clear LED display and easy-to-use touchpad controls with independent displays for temperature and time - Timer from 1 second to 9,999 minutes - Includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB2DG Digital Dry Block Heater offers accurate and fast sample heating with PID microprocessor temperature control, making it perfect for various applications that demand consistent heating. This heater accommodates two interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB2DG features a robust painted steel housing and is equipped with a clear LED display, easy-to-use touchpad controls with independent displays for temperature and time, and an audible alarm, enhancing usability and precision. This Dry Block Heater also includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints, making it a superior choice for modern lab environments.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB2DG Digital Dry Block Heater, 2 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty