Formulatrix Tempest V.2 Liquid Handler With Pumping Box Spares/Repair Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

Planer Kryosave Compact KS/1.7 & Temperature Gauge Model KS10-230-B-F-H Both units are in reaso (more)nably good cosmetic condition, but they both have various marks and scrapes. They both power up and communicate successfully. The system comprises; Planer Kryosave Compact KS/1.7Model: KS/1.7Serial#: 3215 Planer Kryosave Temperature Gauge Model KS10-230-B-F-HModel: KS10-230=B-F-HSerial#: 3221

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and powers on; however, upon activation, the pump experiences a short circuit, which prevents further testing. Therefore, this item is listed as Spares/Repair. It features 2 x Shelves: 55 x 84cm

This Sanyo MDF-593 Ultra Low Temperature Chest Freezer ULT 487 Litres was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It was in use right until we collected it. It is in good cosmetic condition with marks from use. Capacity 487 litersMinimum temperature -93˚CInner dimensions 128 x 49 x 75cm (w x d x h)16 x racks 13.5 x 13.5 x 75cm with 3 shelves and 9 sets of support brackets9 x racks 14.5 x 14.5 x 55cm with 7 sets of support brackets

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps GENIE Temp-Shaker 300 with Un (more)iversal Ratcheting Clamps provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 305 x 305mm (12 x 12in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE

Ohaus EX125D Explorer Semi-Micro Dual Range Analytical Balance The OHAUS EX125D Explorer semi-micro  (more)balance has been designed with the technology to ensure that your very specific weighing results are accurate. Sophisticated laboratories requiring accuracy and looking for innovative technology to obtain measurement results can find both in Explorer semi-micro balances. It has a max dual weight capacity of up to 52 g/120 grams, and a dual readability of 0.01mg/0.1mg. Internal Calibration OHAUS' signature AutoCal internal calibration system provides routine maintenance by automatically calibrating the balance every time it senses a temperature change of 1.5°C or every 3 hours, whichever occurs first. This helps ensure the accuracy of the balance when the operator has not performed a manual calibration or when the proper calibration masses are unavailable. In addition, to minimize weighing errors and ensure accurate measurements, AutoCal utilizes two internal weights to perform a linear calibration. Intuitive Software Provides an Extremely Modern User Experience The EX125D includes many facets of modern technology to provide the best weighing experience possible. The icon-based navigation provides tactile feedback and operates in the same manner as a smart phone or tablet computer. The EX125D Explorer semi-micro balance has been designed and constructed to provide a modern weighing experience as well as to bolster accuracy. Click Here to View Product Video INCLUDED: The Ohaus EX125D Explorer Semi-Micro Dual Range Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MOTIC AE21 Inverted Phase Contrast Microscope with 4 Objectives Model: AE21 Series + MOTICAM 2000 ca (more)mera Trinocular Head Adjustable Eyepieces W10x/20 C-Mount Adapter 0.65x 4 Objectives (including 2 for phase contrast X10 and X20): E-Plan 4x/0.10 E-Plan PH 10x/0.25 LWD PH 20x/0.40 LWD 40x/0.60 Transmission illumination. With software and computer With Accessories Equipment tested and verified In good condition Power cord

ELGA PURELAB Ultra IO MK2 Water Purifier Purification System This item was removed from a university (more) where it was surplus to requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. Also included are the following: 2 x Elga LabPure S1 Cartridges

MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonable cosmetic condition for this type of equipment, though it has been well used. It has a 16amp 5 pin 3phase plug fitted.

Profibus – a real-time industrial network standard. It is based on the physical layer of the s (more)erial interface known as RS485. Communication takes place on a master/ slave basis and in this correlation the scale acts as a slave device. The use of the Profibus interface allows RADWAG scales to integrate with older generation automation systems using the Profibus network, which is still widely used in industry. Profibus is featured in the IM01.EX-4 communication module as well as in MW-01-A4 and MW-04-3 weighing modules, and as an option at an extra charge in PUE HX7 and PUE HY10 terminals.

Ohaus ISHD23HDG Incubating Heavy Duty Orbital ShakerIncubating Heavy Duty Orbital Shakers offer exce (more)ptional temperature uniformity and are designed for a variety of shaking and incubating applications. The exclusive Opti-Flow Forced Ventilation System utilizes twin induction or a single large fan. Air is deflected around & not directly on samples, creating a circular flow of air ensuring uniformity. For repeatable results, the exclusive Accu-Drive shaking system ensures speed accuracy. The Triple Eccentric Drive provides consistent shaking motion throughout the entire speed range. The chambers for the ISHD23HDG and ISHD23CDG units are large enough to hold 2 x 6 L Erlenmeyer flasks with optional clamps and platform. INCLUDED: The Ohaus ISHD23HDG Incubating Heavy Duty Orbital Shaker includes: - Non-skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISHD23HDG Incubating Heavy Duty Orbital Shaker Specifications MotionOrbital, 25 mmCapacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpmTemperature RangeAmbient +5°C – 65°CUniformity± 0.5°C at 37°CSpeed Range15 rpm – 500 rpmTray Size (LxW)18 in x 18 in (457 mm x 457 mm)CalibrationTemperature calibrationCommunicationRS232 ControlDigital Dimensions23.5 in x 32.1 in x 26.6 in (596 mm x 815 mm x 675 mm) (HxLxW)Drive System Triple Eccentric; Brushless DC Motor Inner Dimensions (HxHxLxLxWxW)17 in x 432 mm x 20.6 in x 523 mm x 24.8 in x 629 mmNet Weight224.07 lb (101.6 kg)Power120V, 8A, 50/60HzPower Consumption800 WSafety CertificationTUVSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm /- 1 rpmSpeed Range15 rpm – 500 rpmTimer1 second – 160 hoursTray ConstructionAluminumWorking Environment59°F – 90°F, 80%RH, non-condensing (15°C – 32°C, 80%RH, non-condensing)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Benchmark IPD9600-CK Cryo Kit for liquid nitrogen The Benchmark IPD9600-CK Cryo Kit is a specialized (more) accessory kit designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. This kit includes all the necessary pieces to safely handle and store samples in a liquid nitrogen environment. The insulated container provides a secure and cold environment for samples, while the included tongs, gloves, and goggles ensure safe handling of samples and protection from the extreme cold temperatures. This kit is ideal for researchers and scientists working with tough and hard-to-lyse samples, as it allows for efficient homogenization of samples in liquid nitrogen, resulting in high-quality, consistent results. This kit is designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. INCLUDED: The Benchmark IPD9600-CK Cryo Kit for liquid nitrogen includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty