BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C

Memmert BM 400 incubator / oven with natural convection 70°C Capacity: 53 litres Temperature range:  (more)+5°C above ambient to +70°C Inner glass door Integrated digital temperature display 1 stainless steel shelf Power supply: 230 V Frequency: 50-60 Hz Power: 800 W External dimensions (W) x (D) x (H): 55 x 53 x 68 cm Internal dimensions (W) x (D) x (H): 40 x 33 x 40 cm Weight: 35 kg Tested at 45°C (measured 43.8°C)

Temperature range: Ambient +5°C to 300°C Temperature uniformity (at 150°C): ± 2.5 K Temperature fluc (more)tuation (at 150°C): ± 0.3 K Heating up time to 150°C: 25 min Recovery time after door was opened for 30 s (at 150°C): 6 min Air change rate at 150°C: 64 x/h Load per rack: 12 kg Total load: 25 kg Interior volume: 20 L Internal dimensions (WxHxD): 222 x 330 x 300 mm Dimensions (WxHxD): 435 x 495 x 520 mm Weight: 27 kg

Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V Temperature Ran (more)ge Ambient +15°C to 260°C Temperature Distribution Accuracy Forced Convection: ± 2.5°C (at 260°C) Natural Convection: ± 3°C (at 120°C) Chamber Volume 90L Features - Two types of circulation, forced and natural convection, in one unit (compatible with model 300/400/600) - Eco-oven with improved air velocity control system and adjustable damper - Program featured to reduce power consumption significantly - Superior heat tightness and insulation of chamber - Excellent dust tightness, dust can hardly enter the chamber - Air velocity changeable in 10 stages using digital setting of controller - Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions - Adjustable damper position at chamber front to optimize operation - Fluorescent display, interactive input method, calibration off-set function High-performance, energy-saving, programmable 90L constant temperature oven with two types of circulation (forced and natural convection) in one unit. Program featured to reduce power consumption significantly. Superior heat tightness and insulation of chamber. Excellent dust tightness, dust can hardly enter the chamber. Air velocity changeable in 10 stages using digital setting of controller. Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions. Adjustable damper position at chamber front to optimize operation. Fluorescent display, interactive input method, calibration off-set function. Operating temp ambient +15~260°C. INCLUDED: The Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN260plus Natural Convection Oven 256L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 256 L (9 cu. ft.) Features - Internal volume of 256 L (9 cu. ft.), ideal for large capacity applications - Working temperature range from +5°C above ambient to +300°C, perfect for various laboratory tasks - Precise temperature control with a resolution of 0.1°C up to 99.9°C, 0.5°C from 100°C, ensuring accuracy - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays for easy monitoring and control - AutoSAFETY feature with integrated over- and undertemperature monitor "ASF" to ensure the safety of sensitive samples - Admixture of pre-heated fresh air via an electronically adjustable air flap for enhanced air circulation - Robust stainless steel interior with reinforced ribbing and integrated large-area heating for durability and hygiene - Maximum chamber loading of 661 lbs. with a maximum per shelf loading of 44 lbs., providing ample support for heavy-duty applications The Memmert UN260plus Natural Convection Oven 256L, 115V is designed to provide precise and consistent heating for a variety of laboratory applications. With a large internal volume of 256 liters (9 cu. ft.), it offers ample space for handling large batches or bulky materials. The oven operates within a temperature range of +5°C above ambient to 300°C, ensuring flexibility for both low and high-temperature tasks. The integrated TwinDISPLAY features a high-definition TFT-color display and a PID-microprocessor controller, allowing for easy adjustments and monitoring of temperature, airflow, and timing parameters. The oven’s two Pt100 sensors work in tandem for mutual monitoring, ensuring continuous temperature accuracy and reliability. Safety and efficiency are paramount in the design of the Memmert UN260plus. The oven is equipped with AutoSAFETY, which includes over- and under-temperature monitoring with the ASF system, providing immediate alerts for any temperature deviations. Fresh air admixture is optimized through an electronically adjustable air flap, ensuring uniform heating. The durable stainless steel interior is easy to clean, corrosion-resistant, and reinforced with large-area heating on four sides, making it perfect for rigorous use in demanding environments. With a maximum chamber loading capacity of 661 lbs. and high-quality construction, this oven is an ideal solution for laboratories requiring robust and reliable thermal performance. INCLUDED: TheMemmert UN260plus Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 53 L (1.9 cu. ft.) Features - 53 L (1.9 cu. ft.) internal volume with ample capacity - Temperature range from +20°C to +80°C with natural convection - High accuracy with 0.1 °C temperature setting resolution - Equipped with two Pt100 sensors for precise monitoring and fault tolerance - TwinDISPLAY with adaptive PID-microprocessor control and dual TFT displays - AutoSAFETY with integrated over- and undertemperature monitoring and alarms - Fully insulated stainless steel door with 2-point locking system - AtmoCONTROL software for programming via USB or Ethernet interface The Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V, offers a spacious 53-liter (1.9 cu. ft.) chamber ideal for precise paraffin applications and reliable temperature control. Operating within a temperature range of +20°C to +80°C, this oven features natural convection to provide even heat distribution without the need for forced airflow. Its highly accurate 0.1°C temperature setting resolution is maintained by dual Pt100 sensors, ensuring consistent performance with integrated fault tolerance for added security. The adaptive PID-microprocessor controller with TwinDISPLAY and dual high-definition TFT displays allows for intuitive control, precise adjustments, and continuous performance monitoring. This oven is equipped with advanced safety features, including the AutoSAFETY system, which offers automatic over- and undertemperature protection with visual and acoustic alarms to prevent overheating. The robust stainless steel interior is easy to clean and reinforced for durability, while the fully insulated stainless steel door with a 2-point locking system ensures an airtight seal. For ease of programming and monitoring, the AtmoCONTROL software is included, allowing users to manage settings and transfer programs via USB or Ethernet. The UN55PA is built for efficiency, reliability, and the highest standards of paraffin application. INCLUDED: TheMemmert UN55PA Natural Convection Paraffin Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Double Stack Sanyo CO2 Incubator Model-MCO 20AIC Lab This item was removed from a university lab whe (more)re it was surplus to requirement. Both units power up and are in good working order. These items are in good cosmetic condition internally and externally.

This listing is for a Thomas 7100561 Vacuum Pump.The unit is in full working condition and is ready  (more)for immediate release.The Thomas 7100561 Piston Vacuum Pump is a top-tier dry-running WOB-L® piston pump, meticulously engineered for high-pressure applications. Its design prioritises low vibration and balanced flow, ensuring smooth operation while maintaining low power consumption, making it an excellent choice for energy-efficient workflows.Key Benefits:Precision Performance: Known for its reliability, this pump is ideal for demanding environments, catering to industries such as medical, laboratory, and environmental applications.Impressive Flow Rate: Achieves a maximum free flow rate of 212 l/min (7.5 cfm), allowing for efficient handling of various tasks.High Pressure Capabilities: Supports a maximum continuous pressure of 12.1 bar (175 psi), making it suitable for tasks requiring substantial pressure levels.Strong Vacuum Performance: Provides a maximum continuous vacuum of -990 mbar (29.2 in.Hg), ensuring effective suction for a variety of applications.Specifications:Type: Dry-running WOB-L® piston pumpApplications: Medical, laboratory, environmentalMaximum Free Flow Rate: 212 l/min (7.5 cfm)Maximum Continuous Pressure: 12.1 bar (175 psi)Maximum Continuous Vacuum: -990 mbar (29.2 in.Hg)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Varian 640-IR is an affordable, high performance spectrometer designed to make FT-IR spectroscop (more)y easy. With a range of unique, easy to use hardware and software features, it allows even novice users to quickly become productive. It is available in mid-IR or near-IR configurations and is ideally suited to QA/QC applications and identification and verification analyses, and is a perfect educational tool. Spectral range: 7900 – 375 cm-1 Spectral resolution of at least: 0.25 cm-1 The limits of the permissible absolute error of the wave number scale: ± 0.25 cm-1 Signal-to-noise ratio (the number of scans is 100, with a standard configuration with a spectral resolution of 4 cm-1): at least 10000 cm-1 The level of pseudo-scattered light is not more than ± 0.1% Integration time: 5 s Monochromator: high-speed Cerny-Turner As-is No software No warranty

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

Pfeiffer MVP 070-3 Diaphragm Pump Final Pressure 1 hPa / 0.75 Torr / 1 mbar Maximum Pumping Speed  (more)4.3 m3/h / 2.53098 cfm / 71.6681 l/min Number of Heads/Stages 2/4 Features - Diaphragm pump with a pumping speed of up to 4.3 m3/h - No hydrocarbons: Completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Simple logistics: Our diaphragm pumps are suitable for all voltages worldwide - Fulfills cleanroom class ISO 8 (according to DIN EN ISO 14644-1) The Pfeiffer MVP 070-3 Diaphragm Pump is an advanced, oil-free solution engineered to deliver reliable, clean vacuum performance without hydrocarbons. With a maximum pumping speed of 3.8 m³/h at 50 Hz and 4.3 m³/h at 60 Hz, this pump is built for optimal efficiency in diverse lab applications. Designed with a final pressure of 1 hPa / 0.75 Torr / 1 mbar, the MVP 070-3 ensures precise vacuum control while maintaining an exceptionally low integral leak rate of 0.002 Pa m³/s, minimizing contamination risks. Certified to meet cTUVus standards under UL / CSA 61010-1 and protected by an IP40-rated enclosure, this pump meets rigorous safety requirements and offers robust performance across a wide range of applications. Supporting versatile input voltages (100–115 / 200–230 V AC at 50 Hz and 100–115 / 120 / 200–230 V AC at 60 Hz) with a ±10% tolerance, the MVP 070-3 is well-suited for global use. It operates with a noise level of only 52 dB(A) (EN ISO 2151), ensuring a quiet laboratory environment, while its air-forced convection cooling method maintains optimal operation. Featuring compact G ¼'' connection flanges, a max intake and exhaust pressure of 1,100 hPa, and a lightweight build of 16.4 kg, this diaphragm pump offers easy integration into lab setups. With no gas ballast needed, the MVP 070-3 promises efficient, maintenance-friendly operation, perfect for labs requiring clean, reliable, and durable vacuum systems. INCLUDED: ThePfeiffer MVP 070-3 Diaphragm Pump includes: - Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty