BINDER BD-240 incubator / oven with natural convection 100°C

APPLIGENE Hybridisation Incubator Hybrid Hybridisation Oven Hybridisation Oven Model: Hybrid 91 500W (more) RPM: 6 Stainless steel interior Door with glass window For tubes up to 300mm long Viewing window In excellent condition Tested at 37°C

Binder BFED 53 Hybridisation Oven Rotisserie Shaker This item was removed from a university lab wher (more)e it was surplus to requirements. The oven powers on and is in good cosmetic condition. It features a speed-adjustable shaking platform and a rotisserie bottle holder with 12 bottle slots. The glass inner door is intact, and all mechanical functions such as the rotisserie and shaking platform are operational. The unit is in good working order (thermometer not included). Specifications:- Maximum oven temperature: 100˚C - Rotisserie bottle holder: 12 places - Glass inner door Model: BFED 53Serial No.: 01-27712

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato FO-610CR Muffle Furnace with Communication Port 17.5L, 220V Operating Temperature Range 100° (more)C to 1150°C Max. Temperature Reaching Time ~80 min. Internal Capacity 17.5L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device - Selectable options include an exhaust system unit, N₂ gas loading device, a temperature output terminal, a time up/alarm output terminal, and a sample tray Standard 17.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-610CR Muffle Furnace with Communication Port 17.5L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Leitz Laborlux K Binocular Microscope was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed. Head - 512 661 2 x Eye Pieces -Periplan 10 x / 18 (519 748) 4 x Objectives:-160/- EF 10/0.25 (519760)160/0.17 EF 40/0.65 (519762)160/0.17 EF 100/1.25 OEL (519804)160/- EF 4/0.12 (519759) Condenser Head - 0.90ASS1.1 (513548)Condenser Swing top (513547)

Perkin Elmer Wizard Detector 1470-002 Gamma Counter Wallac Wizard Laboratory The unit has been profe (more)ssionally serviced, is in good working condition and is ready for use. A full detailed report is available on request. It is in good cosmetic condition with marks from use. Floppy Disks: 1x EG & G WALLAC 1470 Wizard Main Program Harddisk InstallationV 3.51085 7672 1x EG & G WALLAC 1470 WizardMS DOS Formatted Data Diskette1085 7672 1x WALLAC Decanting tool:Model 1470-153

Thermo Fisher TDE60086FV Ultra Low Temperature Freezer Lab This item was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition.

Thermal cycler gradient Eppendorf 5331 Mastercycler Gradient. Block universal for 96 tubes of 0.2 m (more)L or 77 tubes of 0.5 mL. Control of the temperature of the block of 4 to 99°C.  Temperature-control speeds: Heating rate: approx. 3°C/s; cooling rate: approx. 2°C/s, measured on the block.Temperature Accuracy: ± 0.2°C. Storage of 100 programs. RS232 output. Includes manual. The Eppendorf 5331 Gradient MasterCycler is ideal for quantitative PCR applications and offers extremely fast temperature rise, a 1° to 20°C gradient function, short detection times and intuitive programming. The gradient block can hold 0.2 mL (capacity of 96) and 0.5 mL (capacity of 77) tubes or a microtiter plate (capacity of one), without the need to change blocks. Specifications: 230 V; 50-60 Hz; 500W Dimensions AnchxFxAlt cm: 26X41X27 Weight: 12 kg

Ohaus PX84/E Pioneer Analytical BalanceThe OhausPX84/E Pioneer PX Analytical Balance combines essent (more)ial weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX84/E weighing plate has a maximum capacity of 82 gramswith a readability of 0.0001 grams and a weight stabilization time of 3 seconds.The PX84/E is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication. 82 gram weight capacity Readability (grams): 0.0001 Pan size (diameter): 90 mm Stabilization Time: 3 seconds External Calibration Model The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use The PX features a second line display for additional information or guidance Static removal bar for convenient grounding USB and RS-232 connectivity for easy communication Click Here to View Product Video INCLUDED: The Ohaus PX84/E Pioneer Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Gel Doc EZ System is a compact and automated gel imaging instrument designed to yield publicatio (more)n-quality images and analyzed results with just the push of a button. The Gel Doc EZ System provides unparalleled flexibility with the use of four application-specific trays: White tray for Coomassie, copper, silver, and zinc stains Stain-free tray for stain-free imaging with Bio-Rad stain-free gels Chemiluminescence: No Fluorescence: Yes (stain-free imaging, requires Bio-Rad stain-free gels) Colorimetry/densitometry: Yes Gel documentation: Yes (Flamingo, Oriole, SYPRO Ruby, Coomassie, Fluorescent Orange, or Krypton Stains; ethidium bromide, GelGreen, Gel Red, SYBR Safe, SYBR green, or SYBR Gold dyes; Bio-Rad stain-free gels) Maximum sample size: 112 x 150 mm Maximum image area: 112 x 150 mm Excitation source: Trans UVB (302 nm) Illumination control: 2 modes; Trans-UV, Trans-White White tray: visible spectra Stain-free tray: requires Bio-Rad stain-free gels Detector: CCD Image resolution: 1392 x 1040 pixels (1.4megapixels) Emission filters: Tray-based Dynamic range: >3.0 orders of magnitude Pixel density (gray levels): 4,096 Dynamic flat fielding: Yes Dimensions (LxWxH): 430 x 280 x 380 mm Weight: 7.3 kg