BINDER BD-115 incubator / oven with natural convection 100°C

BINDER BD-115 incubator / oven with forced convection 100 ° C Model: BD115 ventilated Capacity: 115  (more)liters Temperature range: Room temperature plus 5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Year of manufacture: 2010 Tested at 37 ° C

Lenton Furnaces 1200˚C Tube Furnace This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition, with minor marks. Serial No. 4988Year 1996Eurotherm 808 Controller

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF55 Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 53 L (1.87 cu.ft.) Features - Setting temperature range from +20°C to +300°C with a working range starting 10°C above ambient - 53 L (1.87 cu.ft.) internal capacity for versatile applications - Precise temperature control with 0.1°C resolution up to 99.9°C and 0.5°C from 100°C - ControlCOCKPIT with adaptive multifunctional digital PID-microprocessor controller and high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for precise airflow management - AtmoCONTROL software for data logging and program management via Ethernet interface or USB port - Fully insulated stainless steel door with 2-point locking and inner glass door for improved safety and visibility - Easy-to-clean stainless steel interior with large-area heating integrated on four sides The Memmert UF55 Forced Circulation Oven 53L, 115V is designed for precise and efficient temperature control, making it ideal for a wide range of laboratory applications. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this oven provides a user-friendly interface for adjusting critical parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time. The oven's working temperature range extends from a minimum of 10°C above ambient up to +300°C, with a fine resolution of 0.1°C up to 99.9°C, ensuring precise thermal management. Forced air circulation by a quiet, adjustable air turbine enhances airflow within the chamber, delivering uniform heat distribution throughout the spacious 53L (1.87 cu.ft.) interior capacity. The stainless steel interior, reinforced by deep-drawn ribbing and integrated large-area heating on four sides, ensures durability and easy cleaning. The Memmert UF55 also incorporates multiple safety features, including an adjustable electronic overtemperature monitor and mechanical temperature limiter, meeting DIN 12880 standards. The SetpointWAIT function ensures that the process time only starts once the set temperature is reached, guaranteeing accurate thermal conditions. For fresh air regulation, the oven features electronically adjustable air flap control in 10% increments, combined with a vent connection for efficient airflow management. With a fully insulated stainless steel door, two-point locking mechanism, and inner glass door for safe observation, the unit provides optimal protection and convenience. The oven comes with AtmoCONTROL software on a USB stick, allowing easy programming and data management via Ethernet or USB, making it a versatile addition to any laboratory. INCLUDED: TheMemmert UF55 Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN260 Natural Convection Oven 256L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) stainless steel chamber for diverse sample sizes - Temperature range from +5°C above ambient to +300°C for various applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature control - SingleDISPLAY digital PID-microprocessor with high-definition TFT color display - Natural convection system provides uniform heating throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air - Supports up to 9 stainless steel grids, with a max load of 263 lbs - Auto diagnostic system and overtemperature monitor for enhanced safety The Memmert UN260 Natural Convection Oven 256L, 115V offers versatile laboratory heating with a spacious 256 L (9 cu.ft.) stainless steel chamber, ideal for a range of sample sizes. Its temperature range from +5°C above ambient to 300°C and precise control, enabled by a Pt100 sensor DIN class A in a 4-wire circuit, ensure optimal accuracy. Equipped with a SingleDISPLAY digital PID-microprocessor and high-definition TFT color display, this oven makes temperature adjustments intuitive and precise. The natural convection system promotes uniform heating, and the electronically adjustable air flap allows controlled pre-heated fresh air intake. Built to support up to 9 stainless steel grids with a maximum load of 263 lbs, the UN260 also includes an auto diagnostic system and overtemperature monitor for safe, reliable operation in demanding environments. INCLUDED: The Memmert UN260 Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: Ambient to 320°C Speed range: 100 – 2000 rpm Max. stirring capacity H₂O: 10 L Pla (more)te dimensions: Ø 125 mm Plate material: Stainless steel Dimensions (WxDxH): 168 x 220 x 105 mm Weight: 2,4 kg

The BioRAPTR FRD workstation is an automated non-contact dispenser for low volume 384-well, 1536-wel (more)l, and 3456-well plates. This workstation is the next generation Flying Reagent Dispenser (FRD). It produces highly accurate and precise dispensing across a volume range of 100 nL – 60 µL without cross-contamination, fully supporting integrated high-throughput screening, stand-alone assay development applications, and reagent additions applications in pharmacogenomic research. Key to its elegant design is a dispense head that utilizes four independent fluid pathways. The BioRAPTR FRD delivers reliable, high-quality performance with remarkably low dead volumes over an adjustable dispensing range.

Shimadzu 2101PC Spectrophotometer & PC Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The following software is installed on the PC: - Shimadzu Kinetics - Photometric - UVPC System: Windows 98, Second Edition, 4.10.2222A.

Statebourne Cryogenics Biosystem 24 BM24 Automatic Liquid Nitrogen Refrigerator This was removed fr (more)om a university lab where it was surplus to requirements. The system has had a brand-new power supply fitted and powered up. The water solenoid can be heard running. It is in good cosmetic condition but has some marks on the front panel. The keys are included.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).