Vibration Isolation Laboratory Optics Table 119 x 75cm x 77cm LWH Lab

6 x Black High Bench Height Chair These items were removed from a university lab, where they were s (more)urplus to requirement. All items are in good cosmetic condition with marks from use, and no major wear present. Maximum raised height: 80 cm

These were removed from a university lab where they were surplus to requirements. There are 6 units  (more)in total 50cm X 50cm X 21cm

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

CS 60 A+B (ACID+BASIC) BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in  (more)HD PVC - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

This unit is being sold on behalf of a client in Glasgow. This unit was a special commission inspire (more)d by the Glasgow Transport Museum. It is a unique, bespoke piece of furniture. It is in very good cosmetic condition. It has a very strong well made box section chassis, painted steel legs and the top structure is made of a mixture of woods. There are three good sized lockable drawers on the rear, with keys present. There are cable access points on the tabletops in both sections to allow cables to be run, from underneath, to any equipment that is to be used. The unit could be split into two sections to ease removal. The access to the building for removal is good with large doors and good parking. Viewing of the unit can be made with prior arrangements. This is a heavy item so a van with a tail lift is recommended. We estimate it is around 350 kg. DIMENSIONS :- 351cm (l) x 120cm (w) x 275cm (h). The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Under-bench cabinet depth 51cm - Length 96cm Laboratory cabinet Length: 96cm Depth: 51cm Height: 71c (more)m In melamine 2 doors On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

Gallenkamp Economy Incubator Size 1 This item was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in good cosmetic condition. It was tested with a digital thermometer (not included). It is in good working order.

This Stem Corporation Block Heater & Chiller  Model - RS2550 was removed from a university  (more)lab where it was surplus to requirements. The heater powers up and has been tested with a digital thermometer (not included).When set to 37˚C the display showed 37˚C and the thermometer measured 36.2˚C.When set to 55˚C (max) the display showed 57˚C and the thermometer measured 53˚C. We were unable to test the shiller as we don't have the connecting cable. The magnetic stirrer seems to be working well. 25 x 27mm diameter tube holes

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

IKA DB 8.1 Cuvettes 2 x 6 Dry Block (12.5 mm cuvettes)