New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab

Ultra-low Temperature Freezer -80°C / 363 LIters ESCO UUS-363B-1-SS Lexicon II Temperature Range : (more) -50 to -86˚C Ambient temperature range : 15 to 32˚C (59 to 89˚F) 3 inner doors Interior volume (liter) : 363 Overall dimensions (w x d x h in mm) : 805/945/1980 Internal dimension (WxHxD) (mm) : 450x620x1300 Number of inner doors : 3 No. of storage racks per unit : 9 or 15 Shelves Area : 438 x 570 mm 230v/50Hz With Gold Controller : Microprocessor controller 4x20 in LCD screen Audible and visual alarms USB port for data download Net Weight : 271 kg (597 lbs) Shipping Weight : 321 kg (707 lbs) Shipping dimensions (WxDxH) : 850 x 1068 x 2121 mm

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and powers on; however, upon activation, the pump experiences a short circuit, which prevents further testing. Therefore, this item is listed as Spares/Repair. It features 2 x Shelves: 55 x 84cm

This was removed from a university lab where it was surplus to requirements. Inside dimensions - D57 (more) W76.5 H126cm2 Shelves - 56 x 75cm The unit powers up and the temperature was set to -86 and dropped as low as -86˚c (thermometer read -80˚c) after running for 5 hours. The item is in reasonable cosmetic condition but it is covered in tape marks and residue, and some of the shelf door hinges are broken.

*Previously sold item, recently found in the stock count.* This Sanyo MDF-U74V VIP Series Ultra Low  (more)Temperature Freezer was removed from a university lab where it was surplus to requirements. The unit powers up and achieved -80˚C in testing. We left it on overnight. It is in good cosmetic condition with some minor marks from use. Internal dimensions - D58.5 W87 H140cm3 Shelves - 53.5 x 85.5cm

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is  (more)surplus to requirements. The lab informed us that it was working when last used. The microscope is from 1998, has one SE2 Detector. Included are the following; Hitachi S3000H SEM Scanning Electron Microscope LabModel: S-3000HDate: 9/8/12Part#: 50E-G386Serial#: 1014-30 System specifications- 0.3 - 30kV acceleration voltage range- 5 nm resolution at 25kV in variable pressure mode- 150mm diameter maximum specimen size- Dual-bias for low voltage signal noise- Backscatter mode Canatron Transformers EN 60742 Transformer Model: EN 60742Serial#: CT6699 Hitachi CM751ET MonitorModel: CM751ETSerial#: G8E008620 Hitachi CM751ET MonitorModel: CM751ETSerial#: T9A 012253 Hitachi S3000H SEM Control PanelSerial#: 1014-30 Edwards Oil Mist Filter EMF20Serial#: A 462 29 000 Hitachi Measure Function Setup Disk V 01-05Serial#: 50E-5497 Hitachi SEM Data Manager Setup Disk V 01-05Serial#: 50E-5502 Hitachi S-3000Series V 10-16 CD Disc 1 & 2Serial#: 50E-8108 Hitachi PC-SEM Restore CD Disc 1 & 2Serial#: 1014-30 Adaptec SCSI Select v2.57.4 Floppy DiskSerial#: 1492920-00 Adaptec AVA-2915LP/2930LP v1.13 Floppy DiskSerial#: 1495022-00JA HP Operating System DVDSerial#: 483886-B21 Contec Drivers Software COM Setup Disk v.1.8Serial# LYBM994 HP Compaq Business PC Documentation and Diagnostics DVDSerial#: 490849-B21 HP Operating System DVDSerial#: 394378-002 HP Operating System DVDSerial# 486467-B22 HP Restore Plus! DVD Serial#: 481206-B25 Roxio Creator Business 10 DVD Serial#: 498164-B21 S300H Printed Circuit Board Model S-3000H SEM Instruction Manual Serial#: 50E-9247-9 Hitachi S-Type FilamentsDate: 08.06.201Lot#: 0490228080Serial#: 777-0179

This Hitachi H600 Transmission Electron Microscope was removed from a university lab where it was no (more) longer needed. It has not been tested but it is in reasonably good condition. It has been completely disassembled for removal. If you would like images of it in its current state, we would be happy to provide these.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: 0°C to ambient Temperature can be set individually per compartment Dimensions (Hx (more)WxD): 2000 x 765 x 855 mm Internal dimensions compartments (HxBxD): 600 x 530 x 630 mm

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v These items were remo (more)ved from a university where they were surplus to requirement. Both items are in good cosmetic condition. The smaller 1.84 kVA transformer was tested and found to be operational with a 115-volt power tool on both outlets.No testing was carried out on the larger transformer due to the higher voltage and internal hard-wiring required on the output. Further details regarding each Transformer: TEC 3.5kva three phase transformerSerial No. APR133Primary Volts 440 Secondary Volts 200Input plug red Walther type 210 16 ampsIsolation switchSupplies a very stable supply, designed for stepper motors, CNC machines, and servo equipmentSits on four castors for easy movementDimensions L x W x H 48 x 46 x 41cmsWeight 75kg TEC 1.84kva single phase transformerSerial No. APR135Primary Volts 240 Secondary Volts 115Input plug blue 16amp 3-pin plug 200-250 voltsDual output sockets Mennekes yellow 16amp 3-pin type 1362RS 100-130 voltsDimensions L x W x H 34 x 21 x 29cmsWeight 30.1kg

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Lenght 2 m. Cable types: Standard P0256.2: 2  (more)m Customized P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

Edwards Silencer for nXDS and XDS5/10 Dry Scroll PumpsFeatures - Compact design combines both filtra (more)tion efficiency and noise reduction - Integrated inlet diffuser optimizes sound attenuation - Multi-stage noise reducing features including final stage sound absorbent insert - Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop - Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element - Seamless drawn housings - no welds to rust or vibrate apart - Durable carbon steel construction with black powder coated finish - Ability to mount vertically or horizontally The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps has two main functions: to reduce exhaust noise during pump down and gas ballast operation as well as to collect and retain tip seal dust as the pump is operated. Exhaust gases exit the exhaust port when the pump is being used to evacuate a process chamber, or when the gas ballast control is being used, or both. The noise level when pumping down rises as the throughput increases and the silencer is used to reduce this noise level. The outer can is made of pressed steel and is split to allow access to the filter elements. The filter element housing is made from Santoprene thermoplastic elastomer. The element itself is polyester. The foam block is manufactured from filter foam. INCLUDED: The Edwards Silencer for nXDS and XDS5/10 Dry Scroll Pumps includes: - NW25 Clamp - Centring Ring - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark IPD9600-50S 50ml grinding jar, stainless steel, pack of 2 The Benchmark IPD9600-50S 50ml g (more)rinding jar, stainless steel, pack of 2 are ideal for grinding hard samples such as minerals, ores, polymers and circuit boards. These jars are offered in a 50ml volume. These jars are designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. INCLUDED: The Benchmark IPD9600-50S 50ml grinding jar, stainless steel, pack of 2 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty