General laboratory equipment - other

RCT basic Synthesis Solution 500 Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Se (more)tting accuracy speed 10 rpm Features - Reduces hazard potential compared to oil baths, ensuring safe synthesis in 500 ml round-bottom flasks. - Made of solid anodized aluminum, withstands temperatures up to 300 °C. - Versatile Usage: Optional stand rod allows secure attachment of reflux condenser. - LED display for set and actual values, with temperature setting range from 0 to 310 °C. - ±5 K heat control accuracy at 100°C, ensuring precise temperature regulation. The RCT basic Synthesis Solution 500, designed for safe synthesis in 500 ml round-bottom flasks. This system significantly reduces hazard potential and simplifies handling and cleaning. The solid anodized aluminum synthesis attachment withstands temperatures up to 300°C. Optional stand rod securely attaches a reflux condenser.The perfect solution for cost-effective synthesis.INCLUDED: The RCT basic Synthesis Solution 500 includes: - H 16 V Support rod - R 350 Universal clamp - H 44 Boss head clamp (2 pcs.) - IKAFLON 25 ellipse (5 pcs.) - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - Screw driver - H 135.30 Flask carrier 500 ml without handle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic Synthesis Solution 250 Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Se (more)tting accuracy speed 10 rpm Features - Synthesis blocks can be used for safer synthesis in 250 ml round-bottom flasks, reducing hazards associated with oil baths. - Support rod and elliptical magnetic stirring bars provided for efficient positioning and stirring in round-bottom flasks. - Synthesis attachment made of solid anodized aluminum. - LED displays for set and actual values, with temperature setting resolution of 1 K for precise control. - Designed with aluminum alloy set-up plate and IP 42 protection class, offering long-lasting performance in various environmental conditions. The RCT basic Synthesis Solution 250, designed for safe synthesis in 250 ml round-bottom flasks. This stirrer significantly reduces hazard potential and simplifies handling and cleaning. The solid anodized aluminum synthesis attachment withstands temperatures up to 300°C.INCLUDED: The RCT basic Synthesis Solution 250 includes: - H 16 V Support rod - R 350 Universal clamp - H 44 Boss head clamp (2 pcs.) - IKAFLON 25 ellipse (5 pcs.) - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - Screw driver - H 135.25 Flask carrier 250 ml without handle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RCT basic Synthesis Solution 1000 Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310  (more)°C Setting accuracy speed 10 rpm Features - Reduces hazard potential compared to oil baths, ensuring safe synthesis in 500 ml round-bottom flasks. - Made of solid anodized aluminum, withstands temperatures up to 300 °C. - Versatile Usage: Optional stand rod allows secure attachment of reflux condenser. - LED display for set and actual values, with temperature setting range from 0 to 310 °C. - ±5 K heat control accuracy at 100°C, ensuring precise temperature regulation. The RCT basic Synthesis Solution 100, designed for safe synthesis in 1000 ml round-bottom flasks. This system significantly reduces hazard potential and simplifies handling and cleaning. The solid anodized aluminum synthesis attachment withstands temperatures up to 300°C. Optional stand rod securely attaches a reflux condenser. The perfect solution for cost-effective synthesis.INCLUDED: The RCT basic Synthesis Solution 1000 includes: - H 16 V Support rod - R 350 Universal clamp - H 44 Boss head clamp (2 pcs.) - IKAFLON 25 ellipse (5 pcs.) - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - Screw driver - H 135.40 Flask carrier 1000 ml without handle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic ready-to-go Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Sett (more)ing accuracy speed 10 rpm Features - Stand for precise sensor positioning - LED displays for clear temperature and speed monitoring - Adjustable settings for tailored control - Robust construction with aluminum alloy setup plate - Integrated safety circuit for temperature control - Compatible with external temperature sensors - Versatile connectivity options with RS 232 and USB interfaces Precise temperature control with the RCT basic ready-to-go Solution. This comprehensive package includes essential components such as a stand for secure positioning, multifunctional silicone cover, and PT 1000 temperature sensor. Achieve accuracy and efficiency effortlessly with LED displays and adjustable settings.INCLUDED: The RCT basic ready-to-go Solution includes: - H 16 V Support rod - BC 1000 Beaker cap - Screw driver - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - H 44 Boss head clamp - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 20 - 200 µl includes: - Two Year Manufacturer's Warranty

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 10 - 100 µl includes: - Two Year Manufacturer's Warranty

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 0.5 - 10 µl includes: - Two Year Manufacturer's Warranty

IKA Pette multi 12 x 20 - 200 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 20 - 200 µl includes: - Two Year Manufacturer's Warranty

IKA Pette multi 12 x 10 - 100 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 10 - 100 µl includes: - Two Year Manufacturer's Warranty

IKA Pette multi 12 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 0.5 - 10 µl includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette multi 12 x 0.5 - 10 µl SpecificationsParameterValueDesignAir displacement piston-operated pipetteHandlingMechanicalVolumeVariableNumber of channels12Colour CodeGrayNominal volume10 µlVolume min.0.5 µlVolume max.10 µlIncrements0.01 µlAccuracy with nominal volume±0.2 µlPrecision with nominal volume±0.1 µlAccuracy with 50% of nominal volume±0.2 µlPrecision with 50% of nominal volume±0.1 µlAccuracy with 10% of nominal volume±0.08 µlPrecision with 10% of nominal volume±0.05 µlCertificate of conformity according to ISO 8655yesAutoclavableyesPiston materialStainless steel DLC coatedDimensions (W x H x D)119 x 235 x 63 mmWeight0.160 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity90 %Comparison of ModelsSpecification12 x 0.5 - 10 µl12 x 10 - 100 µl12 x 20 - 200 µl8 x 0.5 - 10 µl8 x 10 - 100 µl8 x 20 - 200 µlNumber of Channels121212888Nominal Volume10 µl100 µl200 µl10 µl100 µl200 µlVolume Range0.5 - 10 µl10 - 100 µl20 - 200 µl0.5 - 10 µl10 - 100 µl20 - 200 µlIncrements0.01 µl0.1 µl0.2 µl0.01 µl0.1 µl0.2 µlAccuracy (Nominal Volume)±0.2 µl±0.8 µl±1.6 µl±0.2 µl±0.8 µl±1.6 µlAutoclavableYesYesYesYesYesYesDimensions (W x H x D)119 x 235 x 63 mm119 x 235 x 63 mm119 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mmWeight0.160 kg0.182 kg0.195 kg0.135 kg0.147 kg0.160 kg.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box Design  (more)Air Displacement Piston Operated Pipette Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit B Vario features mechanical air-cushion pipettes with variable volume ranges of 0.1-2 µl, 2-20 µl, and 20-200 µl, all manufactured in Germany. These pipettes undergo fully automated calibration by robots and include a volume-locking feature to prevent accidental volume changes. The large, clearly visible display and ergonomic, lightweight design ensure low pipetting and tip ejection forces, reducing strain and fatigue. Constructed with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable, ensuring sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 2-20 µl - IKA PETTE vario 20-200 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty

IKA PETTE MicroKit A Vario: 0.1-2 ul, 0.5-10 ul, 10-100 ul, Linea Stand, Tip xs box, Tip s box Desig (more)n Air Displacement Piston Operated Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit A Vario includes mechanical air-cushion pipettes with a variable volume range of 0.1-2 µl, 0.5-10 µl, and 10-100 µl. These pipettes feature fully automated calibration by robots and a volume-locking feature to prevent accidental volume changes. The large and clearly visible display, along with the ergonomic and lightweight design, ensures low pipetting and tip ejection forces, reducing strain and fatigue. Built with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable for sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit A Vario: 0.1-2 ul, 0.5-10 ul, 10-100 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 0.5-10 µl - IKA PETTE vario 10-100 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty

IKA myPlate Speed Range 100 - 2,500 RPM Maximun load 3 kg Setting accuracy speed 10 rpm Features - H (more)igh chemical resistance ensures durability and reliability in various laboratory environments. - Electronically controlled motor for precise and consistent stirring performance. - Digital speed indicator provides clear and accurate speed readings. - Set-up plate made of glass for durability and heat resistance. - Compact dimensions (152 x 30 x 164 mm) and lightweight design (0.76 kg) for portability. IKA myPlate combines the excellent technical features of the popular and proven IKA magnetic stirrers colour squid and big squid with the option of creative individualization. Personal interchangeable frameDesign the set-up plate of the IKA myPlate by yourself. You receive the device with a decorative image template, that can be exchanged easily through the convenient interchangeable frame. Some people have family photos on their desk - you convert one of the best magnetic stirrers from your day-to-day lab work into a canvas for your favorite pictures. Proven high functionalityApart from stirring your samples with IKA myPlate on a creative surface, you get all good features of this strong stirrer, just as you are used to from IKA.INCLUDED: The IKA myPlate includes: - IKA myPlate - Blank photo papers (10 pcs.) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MultiDrive control BT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - TC 1 protective housing included for safe operation with dry samples - 5 spare seals included to extend the service life of blending tubes - USB interface for simplified actuation and documentation - Interval operation feature for efficient coarse crushing and thorough blending - Integrated cooling system in the milling cup for indirect heat dissipation - Built-in weighing function, allowing pre-crushing weighing in the same mixing cup - Batch processing capability with cutting, impact, blending, and dispersing operations - Brushless DC motor for reliable performance - Bluetooth interface for wireless communication Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output.Interval operation is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation. Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control BT Package includes: - 5 Spare Seals - KA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive BT 250.5 Blending tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MultiDrive control Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing range 5 -  (more)4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube. There is a USB interface available for easy actuation and documentation respectively. High performance Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval operation The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling A cooling system is integrated in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display A clear TFT-display guarantees user-friendly operation. Temperature measurement MultiDrive control offers temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function The weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required. Variety of vessels (accessory) MultiDrive provides the right vessel for each grinding task. Vessels don't belong to the scope of delivery.INCLUDED: The IKA MultiDrive control includes: - IKA MultiDrive control - Socket wrench - Disassembly tool 1 - Disassembly tool 2 - Cleaning brush - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MultiDrive basic M20 Successor Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC (more) Process type Batch Features - Performs a wide range of crushing tasks on hard, soft, or fibrous samples - Suitable for dry grinding of hard and brittle substances with MI 250-S milling chamber - Interval operation benefits coarse crushing of hard samples and thorough blending - Integrated cooling in the milling cup for indirect heat dissipation; supports dry ice use - Batch processing with cutting, impact, blending, and dispersing capabilities - Brushless DC motor for reliable operation - Equipped with a USB interface for connectivity Regardless of whether samples are hard, soft or fibrous – IKA MultiDrive basic performs a wide range of crushing tasks. In combination with the milling chamber MI 250-S MultiDrive basic is perfectly suitable for dry grinding of hard and brittle substances. - High performance: 1000 Watt output and variable rotational speeds ranging from 3000 rpm to 20 000 rpm guarantee excellent crushing results. - Interval operation: Is an asset during the coarse crushing of hard samples or for extra thorough blending. - Integrated cooling: A cooling system is integrated in the milling cup, which allows indirect heat dissipation. In addition, dry ice can be used for cooling. INCLUDED: The IKA MultiDrive basic M20 Successor Package includes: - IKA MultiDrive basic - MultiDrive MI 250 – S - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MultiDrive basic Motor Type Brushless DC Speed Range 3000 - 20000 rpm Power Input 1000W Feature (more)s - The IKA MultiDrive basic offers versatile crushing capabilities for various sample types, with options for mixing or grinding. - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a 1000 Watt output. - Interval programming simplifies coarse crushing or thorough blending tasks. - Integrated cooling system ensures separate cooling for the sample and coolant. - Includes a variety of vessels for different grinding tasks (vessels not included). - USB interface allows for easy actuation and documentation, replacing the M 20 mill in combination with the MI 250 milling chamber. Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available (vessels not included in delivery). With the MultiDrive basic it is possible to mix or grind. There is a USB interface available for easy actuation and documentation respectively. In combination with the milling chamber MI 250 MultiDrive basic replaces your M 20 mill. High performance Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output. Interval operation The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling A cooling system is integrated in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. Variety of vessels (accessory) MultiDrive provides the right vessel for each grinding task. Vessels don't belong to the scope of delivery.INCLUDED: The IKA MultiDrive Basic includes: - Power Cord - Socket Wrench - Disassembly Tool 1 - Disassembly Tool 2 - Cleaning Brush - USB Cable - USB A to Micro-B, 2 m - 2 Year Manufacturer's Warranty

IKA MS 450 Swirler Type of Movement Orbital Speed Fix 450 RPM Shaking Strole 4.50 mm Features - Con (more)tinuous operation - Simple to use - Only mixes at one speed. Reduces possibility of damaging your solution. - Sturdy zinc die cast casing - Typical mixing time 15-20 minutes - Spare foam inserts available, item # L005338 - Compatible with all MS3 basic accessories - May use with microtiter plate attachment, item # 3426400 The MS450 Swirler is the ideal solution for mixing lyophilized powder with sterile water for injection (SWFI). It gently mixes up to 8 vials at a fixed speed of 450 rpms, ensuring the integrity of your solution. Designed for continuous operation, this simple-to-use mixer reduces the possibility of damaging your solution by operating at a single speed. Its sturdy zinc die-cast casing ensures durability. With a typical mixing time of 15-20 minutes, the MS450 is compatible with all MS3 basic accessories and can be used with a microtiter plate attachment. It features an orbital movement with a 4.5 mm shaking stroke and a permissible shaking weight of 0.5 kg.

IKA Mini MR standard Speed Range 0 - 2,500 RPM Maximum Load 2 kg Stirring quantity max. per stirring (more) position (H2O) 1 liter Features - Modern magnet coil technology ensures reliable stirring. - Wear-free drive with no moving parts for longevity. - High IP protection class (IP 65) for resistance against dust and water. - Chemically resistant materials used for both set-up plate and casing. - Slip-proof stand ensures safety during operation. The IKA Mini MR Standard, a compact magnetic stirrer designed for efficient stirring tasks without heating. With a stirring capacity of up to 1000 ml (H2O), it offers versatility for various laboratory applications. With a wide speed range from 0 to 2,500 rpm, the MR Standard offers precise control over stirring processes. The white set-up plate allows for easy observation of color reactions, enhancing experimental monitoring. Constructed with durable polyester material, the set-up plate ensures stability and longevity. Equipped with a turning knob for speed adjustment, it offers user-friendly operation. Whether in research, education, or industrial settings, the Mini MR Standard delivers reliable stirring performance in a compact package.INCLUDED: The IKA Mini MR standard includes: - IKA Mini MR standard - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA mini G Fixed Speed 6,000 RPM Capacity 8x 2.0ml Speed deviation 5% Features - Features a transpar (more)ent cover for constant observation and can accommodate PCR-vessels and PCR-strips - Safety feature ensures operation only when the lid is closed, with easy lid opening at the press of a button - Fixed speed set at 6000 rpm with a digital timer adjustable from 1 to 99 minutes for precise control - Integrated quick stop for immediate cessation of operation and fast startup speed for efficient usage - Compact design ensures it fits easily in any lab space, complemented by quiet operation for minimal disturbance - Speed range consistently maintained at 6000 rpm with a 5% speed deviation - Features an automatic cover opening and tool-free rotor exchange for easy maintenance Mini-centrifuge for all applications which do not require high speeds, e.g. micro-filtrations and cell separation. Transparent cover allows constant observation of centrifuge. The mini-centrifuge can be used for both PCR-vessels and PCR-strips. As a safety feature, the centrifuge will run only when the lid is closed. Lid opens easily with the press of a button.INCLUDED: The IKA mini G includes: - IKA mini G - Rotor for 8 x 1.5/2 ml vessels - Rotor for 4 x 8 x 0.2 ml PCR strips - 8 adapters for 0.5 ml vessels (8 pcs.) - Adapter set for 0.4 ml vessels (8 pcs.) - Adapter set for 0.2 ml vessels (8 pcs.) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA lab disc white Speed Range 15 - 1500 RPM Maximum Load 1.5 kg Set-up plate dimensions 100 mm diam (more)eter Features - Modern magnet coil technology ensures reliable stirring. - Wear-free drive with no moving parts for longevity. - High IP protection class (IP 65) for resistance against dust and water. - Chemically resistant materials used for both set-up plate and casing. - Slip-proof stand ensures safety during operation. Ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology. Wear-free drive with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds.INCLUDED: The IKA lab disc white includes: - IKA lab disc white - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA ICC basic IB R RO 15 ICC basic IB R RO 15 ecoIKA facilitates the configuration of your temperatu (more)re control system by offering “ready for connection“ packages with all necessary accessories.Circulating bath with 15 stirring positions for glass beakers up to 250 ml.INCLUDED: The IKA ICC basic IB R RO 15 includes: - Power Cord - Two Year Manufacturer's Warranty

ICC basic eco 8IKA facilitates the configuration of your temperature control system by offering “rea (more)dy for connection“ packages with all necessary accessories. total: 320 x 335 x 349 mm bath opening: 188 x 105 mm * max. bath opening: 227 x 118 mm ** Immersion depth. 85 mm–125 mm *Dimensions to set plate at the bottom of bath. ** Maximum bath opening dimensions at the upper edge of the bath Max. temperature in the plastic bath (“eco” series): 100°C (water only) Technical data relates to the temperature control instrument included in the packageINCLUDED: The IKA ICC basic eco 8 Package ICC basic, 8l eco bath includes: - ICC basic eco 8 - ICC basic - IB 8 eco - BS.ICC Small bridge - Power Cord - Two Year Manufacturer's Warranty

IKA Hula Dancer digital Maximum Speed 2800 rpm Shaking Stroke 4.5 mm Type of Movement Orbital Featur (more)es - Powerful orbital shaker with durable housing ensures high stability - Features a shaking diameter of 4.5 mm for optimal mixing - Supports a maximum load of 100g, catering to small-scale lab needs - Adjustable speed range from 1200 to 2800 rpm for versatile applications - Designed for continuous operation with 100% permissible ON time - Speed adjustments without display for a streamlined interface - Compatible with a voltage range of 100 - 240 V and 50/60 Hz frequency Hula Dancer digital is a powerful orbital shaker with robust housing for high stability. The device has a shaking diameter of 4.5 mm and allows a maximum load of 100g. Its speed range is from 1200 to 2800 rpm.INCLUDED: The IKA Hula Dancer digital includes: - IKA Hula Dancer digital - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Hula Dancer basic Speed Fix 2800 rpm Shaking Stroke 4.5 mm Type of Movement Orbital Features - P (more)owerful orbital shaker with robust housing for high stability - Shaking stroke of 4.5 mm for effective mixing - Allows a maximum load of 100g, suitable for small-scale experiments - Fixed speed at 2800 rpm for consistent shaking - Equipped with a touch function for easy start/stop - Operates within an ambient temperature range of 5 - 40 °C and up to 80% relative humidity - Versatile voltage compatibility of 100 - 240 V Hula Dancer basic is a powerful orbital shaker with robust housing for high stability. The device has a shaking diameter of 4.5 mm and allows a maximum load of 100g. Its speed is fixed at 2800 rpm.INCLUDED: The IKA Hula Dancer basic includes: - IKA Hula Dancer basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HRC 2 basic Working Temp. -20°C to 100°C Pump Pressure Max. .5 bar Flow Rate Max. 21 l/min Features  (more)- Speed-controlled refrigeration system with 400 W cooling capacity - Speed-controlled pump make of PEEK: (0.5 bar; 22 l/min) - 1500 W heating capacity (1200 W @115V) - Digital level indicator - Safety classification III (FL) according to DIN 12876 - Adjustable temperature safety circuit The compact refrigerated and heating circulator HRC 2 basic is renowned for its high energy efficiency, a working temperature powerful infinitely range from -20°C to 100°C and a variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs. The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit is possible for up to 2.5 l thermofluid without a refill.The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter. There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.INCLUDED: The IKA HRC 2 basic Cooling and Heating Circulator, 2-5 l, basic includes: - Power Cord - Two Year Manufacturer's Warranty

IKA HBR 4 control Heating Temperature Range room temp. - 200 °C Speed range 150 - 800 rpm Filling vo (more)lume max. 4 l Features - Cylindrical heating bath with integrated base heating elements, accommodating low-viscous oil or water as heat transfer media - Features a useful volume of approximately 4 liters and a 1000 W heat output for efficient heating up to 200 °C - Equipped with two carry handles, an infinitely variable safety temperature limiter (DIN 12877), and double-jacketed mantle for burn protection - Digital display shows target, actual, and safety temperatures alongside speed, with an integrated magnetic stirrer drive for optimal heat distribution The heating bath features a cylindrical shape with heating elements integrated into the bath base, suitable for use with low-viscous oil or water and has a useful volume of approximately 4 liters and a heat output of 1000 W. It is equipped with two carry handles, an infinitely variable safety temperature limiter, and a double-jacketed mantle for burn protection, alongside a digital display for monitoring target, actual, and safety temperatures. An integrated magnetic stirrer drive enhances the heat distribution within the bath by circulating the tempering fluid. Additionally, the bath includes an RS 232 interface for connectivity and supports the use of an external temperature sensor for precise temperature control directly in the medium.INCLUDED: The IKA HBR 4 control includes: - HBR 4 control - PT 1000.60 Temperature sensor, stainless steel - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA G-L Speed Range 800 - 15,700 rpm Capacity 12 x 1.5/2.0 ml Setting accuracy speed ±100 rpm Featur (more)es - Ideal midi centrifuge for molecular biology separations, compatible with standard 1.5/2 ml vessels and PCR strips - Features automatic cover opening for convenience and safety, with operation starting only when the metal cover is securely closed - Intuitive membrane keypad for easy navigation and settings adjustment, including speed and rotational speed - Equipped with a high-performance motor reaching up to 15,700 rpm for efficient substance separation - Includes a metal rotor and cover for 12 vessels (1.5/2 ml) as part of the broad scope of delivery - Tool-free rotor exchange and automatic cover opening for easy maintenance Separating substances at medium rotational speeds: IKA G-L is the ideal midi centrifuge for all types of separation processes such as those found in molecular biology. It can be used with standard 1.5/2 ml vessels, as well as with PCR strips. The cover opens automatically at the press of a button. The centrifuge is fitted with a metal cover and does not start until it is firmly closed. The completely intuitive navigation is carried out through a membrane keypad. This allows an easy setting of speed, rotational speed or programmes. With a rotational speed of up to 15,700 rpm, the centrifuge is fitted with a high-performance motor. INCLUDED: The IKA G-L includes: - IKA G-L - Metal rotor set 12 x 1.5/2.0 ml - Screwdriver for opening the lid in emergency - USB A-B Cable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty