IKA RCT basic Synthesis Solution 250

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dimensions (WxHxD): 900 x 600 x 580 mm

Vinitex Door cabinet high DD White 1200

Polyscience P60N2A101B IP-60 Immersion Probe Cooler, 1.5 Rigid Coil Probe, -60 to -20C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60N2A101B IP-60 Immersion Probe Cooler, -60°C to -20°C, 150W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 16-Port Drying Chamber, PTFE-coatedThe 16-PortDrying Chamber with PTFE is made of type 304  (more)stainless steel with acorrosion-resistant PTFE-coated interior. Includes 16 neoprene valves withplastic knobs that accommodate both 1/2" and 3/4" adapters forconnection of flasks, a 3/4" thick arcylic lid with neoprene gasket, andone latching pin. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18Liter Freeze Dryers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk.INCLUDED: The Labconco 7522901 16-Port Drying Chamber, PTFE-coated includes: - Neoprene Valves x 16 (accomodates 1/2" & 3/4" adapters) - 3/4" Thick Acrylic Lid with Neoprene Gasket - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf F-35-6-30 Fixed Angle Rotor Eppendorf F-35-6-30 Fixed Angle Rotor, new in packaging. Cat.  (more)# 022822228. This rotor accommodates 6 x 15/50ml. The Eppendorf F-35-6-30 Fixed Angle Rotor is for use in the Vacufuge Plus Vacuum Concentrator. INCLUDED: The Eppendorf F-35-6-30 Fixed Angle Rotor includes: - Full 1 Year Parts and Labor Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Heidolph Incubator 1000 Heating Module The Incubator 1000 Heating Module has been meticulously desig (more)ned to provide optimal heat distribution, ensuring top-tier results in your laboratory applications. Powered by a 300-watt output, this heating module guarantees swift heat-up times within your incubation system, drastically reducing waiting periods and increasing efficiency. Thanks to its wide temperature range, this module can comfortably accommodate thermophilic organisms by reaching an impressive maximum temperature of 65°C. Built with the importance of consistent and rapid heat dissemination in mind, the Incubator 1000 Heating Module is an indispensable tool for any laboratory focused on maintaining high performance and reliable results.INCLUDED: The Heidolph Incubator 1000 Heating Module includes: - Power Cord - Three Year Manufacturer's Warranty