Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
✉️ info@questpair.com
IKA RCT basic ETS-D5 Solution
Product Description
RCT basic ETS-D5 Solution
Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting accuracy speed 10 rpm
Features
- Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer.
- Safety circuit limits max. temp. independently of set point.
- Heating function switches off if temp. limit exceeded.
- Set safety temp. of heating plate remains available.
- Hotplate temp. displayed on RCT.
- Contact thermometer display can be placed at eye level.
The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer.
Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions.
The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times.
Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT.
Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled.
In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes:
- H 16 V Support rod
- H 44 Boss head clamp
- Screw driver
- ETS-D5
- PT 1000.60 Temperature sensor, stainless steel
- H 38 Holding rod
- RCT basic
- Manufacturer's Documentation
- 2 Year Manufacturer's Warranty
Item Stats
Product details
| Number of stirring positions | 1 |
| Stirring quantity max. per stirring position (H2O) | 20 l |
| Motor rating output | 9 W |
| Direction of rotation | right |
| Speed display set-value | LED |
| Speed display actual-value | LED |
| Speed adjustment | Turning knob |
| Speed range | 50 - 1,500 rpm |
| Setting accuracy speed | 10 rpm |
| Stirring bar length | 20 - 80 mm |
| Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h) | +13 K |
| Heat output | 600 W |
| Temperature display set-value | LED |
| Temperature display actual-value | LED |
| Temperature unit | °C |
| Heating temperature range | Room temp. + device self heating - 310 °C |
| Heat control | Turning knob |
| Temperature setting range | 0 - 310 °C |
| Temperature setting resolution of heating plate | 1 K |
| Connection for ext. temperature sensor | PT1000, ETS-D5, ETS-D6 |
| Heating rate medium | 6.5 K/min |
| Temperature setting resolution of medium | 1 K |
| Adjustable safety circuit | 50 - 360 °C |
| Set-up plate material | Aluminium alloy |
| Set-up plate dimensions | Ø 135 mm |
| Sensor in medium detection (Error 5) | yes |
| Temperature measure range PT1000 | -20 - 310 °C |
| Speed deviation (no load,nominal voltage, at 1500rpm + 25 °C) | ±2 % |
| Heating rate (1l H2O in H1500) | 6.5 K/min |
| Heat control accuracy of heating plate (at 100°C) | ±5 K |
| Heat control accuracy with ext. PT1000 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C) | ±1 K |
| Heat control accuracy with ETS-D5 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C) | ±0.5 K |
| Heat control accuracy with ETS-D6 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C) | ±0.2 K |
| Dimensions (W x H x D) | 160 x 85 x 270 mm |
| Weight | 2.4 kg |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 42 |
| RS 232 interface | yes |
| USB interface | yes |
| Voltage | 220 - 230 V |
| Frequency | 50/60 Hz |
| Power input | 650 W |
| Power input standby | 1.6 W |
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €1,207.60*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.