IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Yamato WB-301UFR Auto Pure Remote Dispense Type 1 Water Purification System with Ultrafiltration Mod (more)ule, 120V Configuration Remote Dispense Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, remote dispense configuration water purification system in 115V with ultrafiltration that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and pyrogen removal ultrafiltration. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WB-301UFR Auto Pure Remote Dispense Type 1 Water Purification System with Ultrafiltration Module, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RET control-visc white Speed Range 50 to 1,700 rpm Temperature setting range 0 - 340 °C Setting accu (more)racy speed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life - Automatic switch-off of the heating function if the connected external temperature sensor is not immersed in the medium. Function selectable, timeout time adjustable (Error 5) PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate with white ceramic coating, reaching a temperature of 340 °C, enables rapid heating and very good chemical resiatance. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc white includes: - RET control-visc white - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 85H Dry Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

Benchmark IPD9600-35ZO Zirconium Oxide jar 35ml, set of 2 The Benchmark IPD9600-35ZO Zirconium Oxide (more) jar 35ml, set of 2 are ideal for grinding biological samples, plants, bones, teeth, soils, and sludges. These jars are offered in a 35ml volume with 15mm zirconium oxide grinding balls. Zirconium oxide is a chemically inert ceramic material. Not as hard as and less expensive than tungsten carbide, it is used for softer samples where trace metals from stainless steel may be a concern. These jars are designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. INCLUDED: The Benchmark IPD9600-35ZO Zirconium Oxide jar 35ml, set of 2 includes: - Set of IPD9600-35ZO Zirconium Oxide Jars - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - USB port - Electron (more)ics with easily accessible temperature display in the door handle - No sharp edges for easy hygiene control - Gasket heater that minimizes condensation - Easy data archiving - Anti-corrosion structure guaranteed for life Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Polypropylene structure with polyurethane foam that provides strong thermal insulation - Sealed gaskets that minimize the loss of cold air - Monobloc cabinet made with the exclusive rotational molding technique The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Gilson Microman M50 Positive Displacement Pipette 20 - 50 μl Variable Volume Pipette 20 - 50 μl Unca (more)librated

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge Cell Culture Bundle w/ Swing Out Rotor for  (more)15ml and 50ml Tubes Speed Range 200 to 16,000 RPM Maximum Capacity 4 x 750ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge Cell Culture Bundle w/ Swing Out Rotor for 15ml and 50ml Tubes includes: - FC5916R Frontier Multi-Pro Refrigerated Centrifuge - 30553085 Rotor Swing Out 4x750ml ID Sealable - 2 x 30602502 Bucket 1x750ml D98mm FB 2/pk (4 Total) - 2 x 30553130 Rack 7x50ml D29mm FA 2/pk (4 Total) - 2 x 30553134 Rack 17x15ml D17mm FA 2/pk (4 Total) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036110212 Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate The Heidolph 036110212 (more) Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate is the classic among magnetic stirrers. It enables users to stir gently up to 1,400 RPM and to heat - with a high degree of precision - up to a temperature of 300°C. In addition, it convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm (also available with 135 mm on request). Thus, with this unique size, it is suitable for the use of many accessories and samples on a small footprint. The material used also enables the fastest heating times. The Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000. Click Here to View Product Video INCLUDED: The Heidolph 036110212 Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty