Zeiss 447234 Lamphouse Mount Filter Inlay Axioplan Axiovert Axiophot Axioskop

5 Level Shelf Ht 1750mm x P400mm CODIGEL Shelving Lot composed of: An in-line shelf: 3x1199mm on 5 l (more)evels - L = 3537mm (CODIGEL reference: EA-0163) + A corner shelf: 1x1058mm on 4 levels - L = 1058mm (CODIGEL reference: EA-0276) Very solid, durable and hygienic shelving with 15 micron anodized aluminum structure and high density polypropylene shelves They withstand temperatures from -30°C to +75°C, as well as distributed loads of 100kg/m or 120kg per shelf Adjustable feet New equipment in its original packaging

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

Principle: Any positive and untouched isolation can be performed to separate target cells from PBMCs (more), cultured cells, and dissociated tissue. In addition, cells can be directly isolated from whole blood or bone marrow using StraightFrom Whole Blood MicroBeads. Overall more than 400 different MicroBeads and Isolation Kits are available. Upon automated separation, labeled cells as well as non-labeled cells are obtained and can be used for a variety of downstream applications such as functional and molecular assays, chimerism analysis, and flow cytometry. To ensure cell viability and integrity, cells are kept cooled in Chill Racks. Monitoring: Pre-set programs for all MACS MicroBeads and Isolation Kits ensure accurate sample handling. Sensors constantly monitor the status of the autoMACS Pro, buffer levels, and column status. This ensures optimal instrument performance and safety of samples and operators. Footprint: With MiniSampler: 605×455 mm (W x D) Height: 392.5-454 mm (adjustable touchscreen) It is a benchtop-sized instrument that will easily fit under a common laminar flow hood. Included Chill Racks: The Chill Racks are pre-cooled in the refrigerator (2–8°C). The special coolant contained in the racks switches from fluid to solid at 8°C and maintains a low temperature until the coolant is completely melted. The phase switch is visible. Do not cool racks below 0°C as cell samples may freeze! 1x Reagents rack 1x Chill 5 Rack: contains 24 slots for 5 mL tubes and can be used for cell separations of up to 6 samples. 4x Chill 15 Rack: contains 15 slots for 15 mL tubes and 5 slots for 5 mL tubes. It can be used for cell separations of up to 5 samples. 1x Chill 50 Rack: contains 6 slots for 50 mL tubes, 3 slots for 15 mL tubes, and 3 slots for 5 mL tubes. Up to 3 cell samples can be handled with a Chill 50 Rack.

Potteau Hanging cabinet Sliding door L. Gray 900x380x600

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Medical refrigerator, with glass door, produced by B Medical Systems - Integrated B Medical Systems  (more)multifunction electronics - High quality stainless steel, certified antibacterial, for better longevity and easy hygiene control - High internal volumetric utility, very versatile, thanks to the multiple intuitive guides that allow modularity - Internal modules and tracks fully compatible with other ML / MP models - Large storage capacity Specific features of the ML 670 SG model Preset temperature: +5°C Adjustable temperature in 0.1°C increments: +4°C to +15°C Cold / hot temperature alarm limit: +2°C / +8°C Resistance over time (from +5°C to +10°C): 2 h Climate class (ambient temperature range): SN / ST (+10°C to +32°C) Defrost: Natural Type of refrigerant: R290 Internal dimensions W x D x H (mm): 1544 x 560 x 707 Heat emission (Kcal / h): 31 Compressor running time (%): 16

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System - Complete display and multifunct (more)ion electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - High performance compressor for greater energy efficiency - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity - Automatic internal LED lighting for lower energy consumption COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7" touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent device - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Vinitex Double Door Cabinet with Wheels White 900x520x810