Alpha Unit Block Assembly PTC DNA Engine Systems Thermal Cycler PCR Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Block format: 96 well Sample volume: 5 – 80 µl Lid temperature: 30 – 99°C Temperature gradient: 40°C (more) Max heating rate: 6.0°C/sec Avg haeting rate: 5.0°C/sec Max cooling rate: 4.5°C/sec Avg cooling rate: 3.5°C/sec Ramp adjustment: 0.1°C/sec Block temperature uniformity (15 sec after clock starts): ±0.15°C at 55°C, ±0.25°C at 72°C, ±0.50°C at 95°C Temperature range: 3°C to 99°C Control accuracy: ±0.10°C Temperature increments: 0.1°C/cycle Time increments: 1sec/cycle Sensistivity: 1 nmol/l FAM at 30 µl sample volume Measuring time: 96 well plate (single measurement, 6 colors) aprx 6 sec Measuring range: ±130.000 (±17 bit) Light source: Three long living high power LEDs (blue, white, red) Filter: Filterwheel with stepping motor, 6 positions for color modules Detector: Higly sensitive channel photo multiplier (CPM), Optimal signal/noise ration by effective noise reduction (decreased SNR (signal/noise ratio) technology) Heated lid: manual opening mechanism, automatic pressure application Contact pressure heated lid: 10 kg, automatic Dimensions (WxHxD): 280 x 380 x 430 mm Including software

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

These were removed from a university lab where they were surplus to requirements. The system has bee (more)n tested by a service engineer and is in full working order. It has had a replacement power supply recently fitted. It is in good cosmetic condition with minor marks from use.

Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor The Ohaus 30130874 4 x 8-Place PCR Strip Fixe (more)d Angle Rotor accommodates a capacity of up to 4 x 0.2 ml PCR8. This rotor is designed for use with Ohaus FC5515, and FC5515R series centrifuges and reaches speeds up to 15,000 RPM with a maximum RCF of 15,342 x g. INCLUDED: The Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor includes: - Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Accuris PR2121-N-50BLK qMAX One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml)qMAX Prob (more)e One Step kits are optimized for use with popular TaqMan, Scorpions, and molecular beacon probes. Accuris qMAX™ One Step Kits allow for highly sensitive real time RT-qPCR assays to be performed directly from RNA templates. Workflows are simplified with optimized formulations of ready-to-use 2X qPCR master mix and 20X reverse transcriptase.Optimized buffer includes powerful RNase inhibitors and an extremely thermostable MMLV-derived reverse transcriptase enables robust first strand cDNA synthesis. Accuris Hot Start Taq uses an antibody mediated hot start mechanism allowing for sample preparation at room temperature. Only after an initial incubation at 95C will the Taq become active, so non-specific amplification is greatly reduced. An inert blue dye is included in the Taq master mix to help simplify pipetting and reduce errors.INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2121-N-50BLK qMAX One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V offers precise temperature control for a wide range of laboratory applications. With a temperature range from 0°C to +70°C and a setting accuracy of 0.1°C, this incubator ensures reliable and consistent results. Its energy-saving Peltier heating/cooling system is designed for efficiency, while the advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display makes operation intuitive. The SetpointWAIT function ensures that processes begin only once the set temperature is reached, providing additional accuracy and peace of mind. This 32-liter incubator features a corrosion-resistant stainless steel interior and a textured stainless steel exterior, ensuring durability and long-lasting performance. The unit is equipped with an adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety, while the autodiagnostic system offers fault analysis. With a maximum chamber load of 132 lbs and support for up to three shelves, the IPP30 is designed to handle a variety of samples, making it an ideal solution for laboratories that require precise, reliable, and energy-efficient incubation. INCLUDED: The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml rec (more)eiving flask KS 35/20 The Scilogex Glassware set: Vertical coiled condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20 includes a vertical coiled condenser, a 1000ml evaporating flask with an NS 24/40 joint, and a 1000ml receiving flask with a KS 35/20 joint. This set is designed for use in rotary evaporators, which are commonly used in chemistry laboratories for the gentle and efficient evaporation of solvents from samples. The vertical coiled condenser is an essential part of the rotary evaporator system, providing a large surface area for efficient cooling of the vapor produced during the evaporation process. The 1000ml evaporating flask and the 1000ml receiving flask are made of high-quality glass and are designed with standard joint sizes to ensure compatibility with other components of the rotary evaporator system. The 1000ml volume of both flasks allows for the evaporation and collection of large sample volumes, making this glassware set ideal for laboratories that require high throughput evaporation. The set also features a cooling surface area of 1700cm^2, ensuring efficient and rapid cooling of the vapor produced during the evaporation process. INCLUDED: The Scilogex Glassware set: Vertical coiled condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20 includes: - 1000ml Evaporating Flask NS 24/40 - 1000ml Receiving Flask KS 35/20 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus EX225D/AD Explorer Semi-Micro Analytical Balance For lab work and research that demand precisi (more)on up to five decimal places, the margin for error is nonexistent. The Explorer series of semi-micro balances is engineered with the latest technology to ensure exactness in your specific weighing results. Labs seeking a combination of precision and innovative technology will find both in our Explorer semi-micro balances.Designed for peak performance, these balances offer readability up to 0.01mg and capacities reaching 220g. The integrated AutoCal™ Internal Calibration system guarantees accuracy in applications that need high precision.Featuring a vibrant touchscreen display, the user experience is significantly enhanced. The balance also includes touchless sensors, automatic draftshield doors (included in select models), and an ionizer to safeguard the credibility of your results.To further enrich your weighing process, the balance is outfitted with SmarText™ 2.0 software, icon-based navigation, a 99-item library, 6 user profiles, and an indication for below-minimum sample weight. All these features come together to deliver an efficient, yet straightforward weighing experience.INCLUDED: The Ohaus EX225D/AD Explorer Semi-Micro Analytical Balance includes: - Power Cord - 2 Year Manufacturer's Warranty

Branson 1/8" Microtip Microtip, 1/8″ diameter, for use with Branson SLP and SFX150 Sonifiers; used f (more)or processing volumes 3 – 10 mlINCLUDED: The Branson 1/8" Microtip includes: - Manufacturer's Documentation Request a Formal Quote