Vinitex Head Sink Unit

The two-part system consisting of a filter/fan unit (double filter/ventilation module) and a work ca (more)bin. The work cabin is transparent and thus provides an unobstructed view of the work process, as well as the external illumination of the work area by a light source on the work cabin. The extraction unit consists of a filter module with two H-14 HEPA filters and a fan, which transports the air through the system. This compact design allows easy cleaning and a comfortable and safe replacement of the HEPA pre-filter. The average air speed in normal operation is adjustable and is approx. 0.3 – 0.5 m/s at the entrance opening of the work cabin. The electronic control (SKC-4) monitors the process and can compensate for a drop in air speed due to contamination of the Hepa filter. Dimensions (HxWxD): 1050 x 935 x 940 mm Internal dimensions (HxWxD): 260-540 x 850 x 495 mm Work space opening: 260/500 mm Weight: 120 kg

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

This listing is for a Grant QBT1 Heat Block.The unit is in full working condition and is ready for i (more)mmidate realese.The Grant QBT1 Heat Block is a compact, highly precise dry block heater designed for laboratory applications that require consistent temperature control. This unit is ideal for heating and incubating samples in 1.5 mL Eppendorf tubes, and it is known for its reliability and ease of use.Key Features:Wide Temperature Range: The heat block operates within a temperature range of ambient +5°C to 150°C, making it suitable for a variety of laboratory applications.Precision Temperature Control: With ±0.1ºC temperature stability at 37°C and uniformity of ±0.1ºC within the block and ±0.2ºC across similar blocks, it ensures accurate temperature maintenance for sensitive samples.Digital Display: The display has a 1°C resolution, allowing for easy monitoring and precise setting of the temperature.Heating Block Capacity: Equipped with a block for 24 x 1.5 mL Eppendorf tubes, it provides ample space for small sample incubations, making it ideal for molecular biology and biochemistry experiments.Efficient Heating: The heat block has a heat-up rate of 40 minutes to reach the maximum temperature from ambient conditions.Compact and Portable: With dimensions of 205 x 180 x 122 mm and a weight of 3.6 kg, it is a compact unit that fits easily on a laboratory benchtop.

0

Spectrophotometer UV/Vis Agilent 8453 (G1103A). Range wavelength from 190 to 1100 nm. Detector fotod (more)iodoarray. Reading in less than 1 sec. Includes PC with software built-in UV/VisChemstation B4: advanced, biochemistry. Pack dissolution and general. Includes instruction manual. < 1.0 % At 200 nm, solution of 1.2% KCl, scanning white in air, 5s integration time; (EP*method)** < 0.05 % At 220 nm, solution of 10 g/l NaI, scanning of the target in air, a 5-s time ingegración; ( ASTM method) < 0.03 % At 340 nm, solution of 50 g/l NaNO2, escanéo white on air, 5 s integration time. ASTM method Software: UV/Vis Gemstation B04

Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA HS 501 Digital Shaker Type of Movement Reciprocating Speed Range 0 to 300 RPM Permissible Shakin (more)g Weight 15 kg Features - Infinitely variable speed control from 0-300 rpm - Digital display - Orbital diameter 30 mm - Ideal for all lying vessels, e.g. separating funnels - Continuous operation (endless) even under extreme loads - Timer function - Attachments are not included in delivery, please order separately - Integrated USB and RS 232 interface The IKA HS 501 Digital Shaker is a versatile and robust device, designed for demanding laboratory tasks. It features infinitely variable speed control from 0-300 rpm and a digital display for precise operation. With an orbital diameter of 30 mm, it's ideal for shaking all lying vessels, including separating funnels. This shaker is capable of continuous operation under extreme loads, with a permissible shaking weight of up to 15 kg. The integrated USB and RS 232 interfaces allow for easy data transfer and control. Attachments are not included and must be ordered separately. Safety and convenience are ensured with a timer function, a durable motor, and an elevated control panel to protect against spills.