Gilson Pipetman F167400 Classic Large Volume Starter Kit

Ohaus 30314825 6 x 85ml Fixed Angle Rotor The Ohaus 30314825 6 x 85ml Fixed Angle Rotor accommodates (more) a capacity of up to 4 x 85ml. This rotor is designed for use with Ohaus FC5718, and FC5718R series centrifuges, and reaches speeds up to 13,000 RPM with a maximum RCF of 21,726 x g. INCLUDED: The Ohaus 30314825 6 x 85ml Fixed Angle Rotor includes: - Ohaus 30314825 6 x 85ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Aqueous SystemIdeal forbiology, microbiology, biochemistry, pharmaceutical resear (more)ch, and analyticalchemistry laboratories, centrifugal concentrators quickly process theevaporation of multiple small samples. Benchtop Vacuum Concentrators feature30.5cm (12") dia. epoxy-coated aluminum chambers to accommodate a wideselection of high-capacity rotors. A microprocessor controls centrifugal motionto eliminate bumping and foaming during vacuum evaporation. The brushless motorhas a maximum speed of 1725rpm. A large automatic vacuum release valve preventsloss of sample by quickly releasing the vacuum before the rotor stops. Duringstartup, a built-in vacuum delay prevents bumping by allowing the rotor toachieve set speed before applying vacuum. Up to nine user-set programs may bestored to define temperature, heat time, and run time. Program temperature andtime may be altered while the program is being run. Timer may be set for 1 to999 minutes. An easy-to-read LCD shows program number, actual and set pointtemperatures, heat time, run time, and a heat boost indicator. The controlpanel features three Quick-Start* buttons that each store one user-set program.An audible alarm signals completion of set point run time. INCLUDED: The Labconco 7982010 CentriVap Aqueous System, 115V, 60Hz includes: - Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Moisture Insert 7814900 - 12-13 mm Rotor 7455100 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The FP403 + FP404 model is an analyzer specially designed for in-line oxygen and CO2 measurements on (more) both horizontal and vertical flow packaging machines. Very easy to use and adapt to any mounting configuration.

This ZEISS AxioLab 5 Teaching Head was removed from a university lab where it was surplus to require (more)ments. This item is in very good cosmetic condition. Objectives included: 2 x Carl Zeiss W-PI 10x/23

Memmert VO49 Vacuum Oven 49L, 230V Temperature Range Ambient +5°C to 200°C Vacuum Range 5 to 1100 m (more)bar Chamber Volume 49L (1.7 cu. ft.) Features - Direct contact between load and heatable thermoshelves ensures rapid and uniform temperature control - Digital pressure control for rapid, gentle drying, optimizing process safety for delicate materials - Optional speed-controlled vacuum pump available, enhancing energy efficiency by approximately 70% - Multi-level heating and sensing system with individually placeable, calibratable thermoshelves for precise temperature adjustments - VDE-tested anti-splinter door construction enhances safety across all operational models - Constructed from high-quality, rust-resistant stainless steel for durability and ease of cleaning - User-friendly operation with intuitive AtmoCONTROL software programming - Integrated data logger and multiple interface options for comprehensive documentation and control - Energy-saving features and chemical-resistant components extend service life and reduce operational costs The Memmert VO49 Vacuum Oven 49L, 230V stands as a pinnacle of efficiency and precision in the field of vacuum drying. Designed for diverse applications such as drying food, cosmetics, electronic components, and more, this oven guarantees rapid and uniform temperature control through its direct contact between the load and heatable, removable thermoshelves, ensuring no heat loss. This model features digital pressure control that facilitates rapid yet gentle drying, optimizing the process for delicate materials. The VO49 is engineered with a multi-level heating and sensing system, which includes individually placeable thermoshelves equipped with separate sensors for accurate temperature control and short process times. This system reacts dynamically to different loads or humidity levels, maintaining a constant set temperature crucial for effective vacuum drying. Additionally, each thermoshelf can be individually calibrated to meet specific testing requirements. While the VO49 oven itself is robust and reliable, it is worth noting that the speed-controlled vacuum pump, which enhances the system's energy efficiency by approximately 70%, is available as an optional accessory and is not included as standard. This pump is designed to be chemical-resistant and operates with a low final vacuum of up to 2 mbar, significantly extending the service life of membranes and reducing operational costs. Constructed from high-quality, rust-resistant stainless steel that is easy to clean, the VO49 offers a user-friendly and intuitive operating experience. It is fully programmable via the AtmoCONTROL software, comes with an integrated data logger, and multiple interface options for comprehensive programming and documentation. This makes the Memmert VO49 Vacuum Oven a versatile and essential tool for any lab needing precise and efficient vacuum drying capabilities. INCLUDED: The Memmert VO49 Vacuum Oven 49L, 230V includes: - 2 x Thermoshelves - 4 x Locking Hooks for Thermoshelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 20 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 200 g), wooden box Number of p (more)ieces in the set: 23 Weights 1 g i 2 g – solid masses without adjusting chamber

Julabo DYNEO DD-BC12 Heating Circulator with Analog Output, 115V/50-60Hz Working Temperature Range  (more)20°C to 200°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Suitable for internal and external applications - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - High-quality thermal insulation of the bath tank The DYNEO™ heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank for temperatures to 200°C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with an integrated drain valve. Features a color TFT display with central rotary knob controller, multi-lingual interface, integrated programmer, Pt100 port for external temperature control. USB connection for external PC control and data-logging; Digital option includes RS232 port; analog option includes analog interface for voltage or current control. PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-BC12 Heating Circulator with Analog Output, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty