Roche benchtop clinical analyzer

PreSens Shake Flask Reader Model: SFR V2 This was removed from a university lab where it was surplu (more)s to requirements. The unit has not been tested but is in good cosmetic condition with minor marks.

Polyscience P80NHA101B IP-80 Immersion Probe Cooler, 1.75 Rigid Coil Probe, -80 to -40C, 120V, 60Hz3 (more)D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P80NHA101B IP-80 Immersion Probe Cooler, -80°C to -40°C, 215W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO CD-B39 Open Bath Heating Circulator, 115V/60Hz (NRTL Certified) Working Temperature Ran (more)ge 20°C to 150°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB connection - High-quality bath tanks made of stainless steel - Integrated drain screw (except B5 model) The Julabo CORIO™ CD Immersion Heating Circulator Open Bath combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. The CORIO™ CD immersion circulator provides temperatures to 100°C in plastic tanks and to 150°C in stainless steel tanks. Integrated pump enables temperature incubation for internal or external bath applications. A lever below the display enables simple adjustment between internal and external flow. Pump capacity: 15 L/min; 5.1 PSI. The integrated USB port provides external PC communication for control / monitoring and data logging. Stainless steel tanks from 13 to 39L include a drain port. INCLUDED: The Julabo CORIO CD-B39 Open Bath Heating Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson Pipetman F167400 Classic Large Volume Starter Kit The PIPETMAN® Classic line is one of the wo (more)rld standards in pipetting and offers a wide range of continuously adjustable, air-displacement pipettes with legendary accuracy and precision. The PIPETMAN Classic Large-Volume Kit provides two pipettes that cover large volume transfers from 500µL to 10 mL, along with appropriate filters. Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Classic offers uncontested durability and reliability. Built-to-last, it is the economical solution for years of pipetting.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Siz (more)es (W x H) 18 x 24 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 24 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical choice, specifically designed for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit offers long-lasting performance and easy assembly, making it ideal for consistent use in busy lab environments. Accommodating glass plates up to 18 x 24 cm, the SE410 provides ample space for precise protein analysis, with the option to run two gels simultaneously using an additional divider plate. The SE410's built-in casting stand ensures a leak-free seal, streamlining the setup process and enhancing ease of use. For added versatility, its plates, clamps, spacers, and combs are interchangeable with the SE600 Series, allowing labs to expand and tailor their electrophoresis setups as needed. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity up to 80%, with power settings reaching 500 V, 60 mA, and 20 W—delivering reliable performance across a range of applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate Alignment Template - Wonder Wedge-Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge-Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato BO-601-115V Oil Bath Digital 7L, 115V Temp. Control Range Room temp. +5~180°C Temp. control a (more)ccuracy ±2°C (at 100°C) Bath capacity ~7L Features - Digital temperature setting by ▲▼ keys - Protected oil tank prevents burns caused by contact - Equipped with a drain Stainless steel 7L oil bath meeting a variety of application requirements with a wide temperature range of room temperature +5 to 180°C. This product is equipped with a simple drainage system, as well as a protected oil tank to uphold safe operations within a laboratory. INCLUDED: The Yamato BO-601-115V Oil Bath Digital 7L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SBS AVO-1 shaker. User-adjustable orbital and back-and-forth motion. Speed ​​from 20 to 250 rpm. Tim (more)er up to 60 min or continuous. Eccentricity 22 mm. Dimensions: plate 28*19 cm; external 30*38*17 cm. Weight 6 kg. User manual not available. The SBS AVO-1 shaker is an innovative device designed to efficiently mix a wide variety of liquids and solids in different industries. With its orbital and reciprocating stirring technology, this equipment guarantees a homogeneous and uniform mixture at all times, making it an indispensable tool for production processes and research laboratories. Its compact and easy-to-use design makes it ideal for spaces reduced and for operators of all experience levels. In addition, the SBS AVO-1 has intuitive and adjustable controls that allow you to customize the speed and stirring time according to the specific needs of each application. With this high-quality equipment, users can achieve precise and consistent results with every mix.

Memmert WTB35 Digital Water Bath 37.5L, 115V Volume 37.5 L Working Temperature Range +5 above ambie (more)nt to +100 °C Setting Accuracy 0.1°C Features - Precise temperature control with a working range from 5°C above ambient up to +100°C ensures consistent results - Highly accurate settings with 0.1°C precision for optimal temperature management - Generous 37.5-liter capacity designed to handle a wide range of applications - Durable, corrosion-resistant stainless steel construction guarantees long-lasting performance - Effortless operation with an intuitive 3.5" color touch screen for quick adjustments - Advanced two-stage safety system prevents overtemperature, protecting your valuable samples - Autodiagnostic system with built-in fault detection keeps your process running smoothly - Easy-to-clean deep-drawn stainless steel tray with central drain minimizes maintenance time The Memmert WTB35 Digital Water Bath 37.5L, 115V is designed for precise and reliable temperature control, ideal for laboratory applications such as the heating of samples, nutrient solutions, and emulsions. With a working temperature range from 5°C above ambient to 100°C and a setting accuracy of 0.1°C, this water bath ensures consistent performance across various tasks. The intuitive 3.5" color touch screen allows for easy operation, while the generous 37.5-liter capacity makes it perfect for handling large volumes. Built with durable stainless steel, both the interior and exterior are corrosion-resistant and easy to clean. The Memmert WTB35 is equipped with a two-stage safety system to prevent overheating, along with a microprocessor-controlled PID system featuring autodiagnostic functions for added peace of mind. Whether you're looking to improve temperature stability or streamline your processes, this water bath offers the precision and reliability needed to support your work. INCLUDED: The Memmert WTB35 Digital Water Bath 37.5L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? The E2R Synchronizer application allows for the collection of weighing records from all scales connected to the E2R System. Another application, E2R Manager, provides you with real-time data on the following issues: whether the scale is connected or not; which operator is logged in; what product is being weighed; for which customer is the production being carried out; which order is in progress.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW