Wild Herrbrugg Stereo 40/14 304490 Mikroskop Kamera Adapter

Diaphragm vacuum pump KNF N035.1.2AN.18 Final pressure/limit vacuum reading (abs.) (mbar): 247 mbar  (more)(see photo) Technical characteristics: Voltage: 230V, 50Hz Current: 1.9A Power: 320W Max pressure: 4 Bar Pump flow: 55 l / min Equipment tested Year of manufacture: 2006

Manufacturer: Genevac Model: Rocket Synergy Evaporator with Vacuum Pump and Julabo FL601 Chiller P/N (more): RKTS-23050-SNN S/N: RK0488 MfG: November 2015 Descripton: The Rocket Evaporator is designed to dry or concentrate up to six 450ml flasks, or 18 ASE® tubes. The user is able to focus on other tasks, confident that the Rocket will achieve perfect, reproducible results every time. The Rocket Evaporator is equipped with the advanced performance features that Genevac users expect, such as effective bumping and cross contamination protection, precise temperature regulation and very easy to use controls. A two stage cold trap is built into the Rocket Evaporator, providing very high levels of solvent recovery, even with volatile organic solvents. The cold trap auto-drains under the control of the evaporator to ensure that optimal solvent recovery is maintained, no matter what mix of solvents is being used. The Rocket Evaporator can be used either to dry samples completely, or to concentrate them to a small volume. To help achieve the best results in the desired sample format, there are several options: 1) Evaporation Flasks: These are for drying or concentrating samples – if dried, samples require re-dissolving and then removing via pipette. 450ml volume. 2) SampleGenie™ Flasks: For a wide range of vials, from 12mm to 28mm diameter and up to 70mm tall. The SampleGenie system allows drying of the sample directly into the storage vial. 250ml (plus vial) volume. 3) SampleGenie™ for GC Vials: Specifically for concentrating into GC autosampler vials, this special version of SampleGenie insulates the vial so that only the solvent in the flask evaporates, leaving a small volume in the vial. 4) Puck for ASE® Tubes: The Puck insert replaces the flasks and allows up to 18 ASE® tubes to be evaporated at one time. 5) Flip-Flop system: Samples are collected directly from the extraction system in the special double-ended tube. A SampleGenie adaptor with GC vial is then fitted. The tube is flipped over and placed into the Puck in the Rocket Evaporator and the cap removed. The samples are then concentrated directly into the GC vial.Specifications: Mechanical dataMaximum speed: 1800rpmMaximum G-force: 700gDrive system: Direct driveMaximum Sample load: 6 x 450mlMaximum imbalance: 50g Vacuum systemPressure display: 0-1200mbarPressure control: Automatic, 3mbar to atmosphereSystem ultimate vacuum: 3mbarBumping protection: Dri-Pure® Temperature and controlControl range: Ambient +5°C to 60°CControl accuracy: ±1°CTemperature sensing: via thermistorDisplay range: 0°C to 60°CEnd of method: Time or automaticVisualisation: Via built in strobe (optional) Solvent compatibilityBoiling point range: 40°C to 160°C at ambientIncludes: Alcohols, DCM/methylene chloride, DMF, ethyl acetate, water, TFA HCl: Not compatibleDi-ethyl ether: Only with Inert Gas Purge option DimensionsWidth x Depth x Height: 720 x 640 x 530mmHeadspace required: 755mm (lid open)Weight: 75kgMains: 230V (±10%), 50Hz, 13A Specifications Julabo FL601 Chiller/Cold Trap: Width x Depth x Height : 320 x 500 x 600mmWeight: 48kgCooling Power: 500W at 10°C Items delivered: - Genevac Rocket Evaporator - Julabo FL601 Chiller / Cold Trap- (1) Rocket Evaporator- 6x Flask Plugs- Condenser Drain Tubing- Waste Jug- Connection Cable RS232- 6x Glass Flasks w/ Collar & Pad- 1x Balance Nest- Flask Rack- Instruction Manual as PDF via E-Mail The Genevac Rocket Evaporator is in excellent cosmetic as well as technical condition - 100% functional tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

SECOMAM Anthelie UV/Visible Spectrophotometer Spectrophotometer Type: UV/Visible Mass: 8 kg Spectral (more) range: 190 - 900 nm For tank 10 x 10

FURTHER DETAILS TO FOLLOW

Manufacturer: Waters Model: 2998 Photodiode Array (PDA) Detector P/N: 186002998 S/N: H08998 002A De (more)scription: The Waters 2998 Photodiode Array (PDA) Detector for Purification and Modular LC Systems offers advanced optical detection, providing unprecedented trace impurity detection and quantitation in conjunction with spectral analysis capabilities. It is the ideal detector for any laboratory application, from compound identification to method development. For routine analyses, the 2998 PDA detector is reliable, easy-to-use, and has enhanced software control to provide flexibility for simultaneous 2D and 3D operation. Features: - Patented TaperSlit flow cell ensures high sensitivity while maintaining optimal spectral performance- Low noise performance of <10 µAU- Wide, linear dynamic range with constant optical bandpass- Simultaneous quantification of high- and low-level components within a single chromatographic separation- Flexible sampling rates for normal and fast LC separations from 1 to 80 Hz- Independent optimization of sampling rate and time constant gives you the ability to tune your detector to your separation goals- Definitive compound identification & co-elution detection- Spectral exposure optimization to maximize the signal-to-noise across the entire wavelength range with a single Deuterium lamp- Lamp optimization for the best s/n performance over the lifetime of a Deuterium lamp- Console software for simple control, monitoring, and diagnostics- Thermal wander management for maximum baseline stability- Flow cell options to match your separation scale and type Specifications: Electrical requirements and power supply:- 100-240 V- 50/60 Hz- 185 VA- F 3.5A / 250V Items delivered: - Waters 2998 Photodiode Array (PDA) Detector Condition: The Waters 2998 Photodiode Array (PDA) Detector is in very good cosmetic as well as working and technical condition. It is 100% functional tested and ready to be applied.

Manufacturer: Müller - Systems & Handling Model: 10 Liter Lidded drums with flat stackable base (2.1 (more)/03) P/N: 0100366 We have many different sizes available! Just ask for it or browse our shop! Description: Cylindrical lidded drum in stainless steel Base and lid deep-drawn, body rounded, edging calibrated, body and base seams butt-welded, smoothed and polished, seal vulcanized, clamping ring with hand lever. Key Features: - Stainless Steel 1.4404, rust free- GMP-certified Pharma Quality- flat base = residue-free cleaning Each drum consists of: Clamping ring - (+ airtight closing, + sealable, + exchangeable) Sealing - (+ in food grade quality, + exchangeable) Lid - ( + formed sealing surface, + exchangeable) Body - (+ smooth-walled, + easy to clean) Base - (+ without beads, + stackable on lid) We have the following sizes available: P/N: 0102593 - 0,1LP/N: 0102594 - 0,2LP/N: 0100359 - 0,5LP/N: 0100360 - 1LP/N: 0100364 - 3LP/N: 0100365 - 5LP/N: 0100366 - 10LP/N: 0100372 - 70LP/N: 0100375 - 100LP/N: 0100376 - 100L Items delivered: - MÜLLER Drum incl. Base 10L (flat stackable base)- Müller Lid incl. Sealing- Müller Clamping Ring The drum is in very very good cosmetic as well as functional condition.     Hersteller: Müller - Systems & Handling GmbH Modell: 10L Deckelfässer zylindrisch mit Flachboden, Deckel und Spannring (stapelbar) (2.1/03) P/N: 0100366 Beschreibung: Zylindrisches Edelstahldeckelfass Boden und Deckel tiefgezogen, Mantel gerundet, Bordur kalibriert, Mantel- und Bodennaht stumpfgeschweißt, geglättet und verschliffen, Dichtung vulkanisiert, Spannringverschluss mit Handhebel. Kernmerkmale: - Edelstahl 1.4404, rostfrei- GMP-zertifizierte Pharma Qualität- Flachboden = rückstandsfreie Reinigung Jedes Fass besteht aus folgenden Elementen: Spannring - (• zum luftdichten Verschließen, • plombierbar, • auswechselbar) Dichtung - (• in Lebensmittelqualität, • auswechselbar) Deckel - (• mit eingeformtem Dichtungssitz, • auswechselbar) Mantel - (• glattwandig, • leicht zu reinigen) Boden - (• ohne Sicke, • auf Deckel stapelbar) Wir haben weitere Größen dieser Serie auf Lager: P/N: 0102593 - 0,1LP/N: 0102594 - 0,2LP/N: 0100359 - 0,5LP/N: 0100360 - 1LP/N: 0100364 - 3LP/N: 0100365 - 5LP/N: 0100366 - 10LP/N: 0100372 - 70LP/N: 0100375 - 100LP/N: 0100376 - 100L Lieferumfang: - MÜLLER Fass inkl. Flachboden 10L (stapelbar)- Müller Lid incl. Sealing- Müller Clamping Ring Das Fass ist in einem absolut neuwertigem Zustand.

IKA Fisher Brand Color Squid Magnetic Stirrer model: Color Squid Technical characteristics: 100 – 24 (more)0 V, 4 W. Continuously adjustable speed: 0 to 1500 rpm. Tray dimensions (ø): 11 cm External dimensions (D)x(H)x(W): 130 x 135 x 50 mm Stirring capacity: 0.8 liters (H2O) Weight: 1kg