Radwag HX7.30.H4 Multifunctional Scale

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Eppendorf 400ml Cone Fitting Adapters, Cat. # 022638785 New in box Eppendorf 400ml cone fitting adap (more)ters (Cat. # 022638785) for rotor A-4-81 rectangular buckets for the Eppendorf 5810 and 5810R centrifuges. This is a two piece set, and the adapters are new in packaging. The Eppendorf 400ml Cone Fitting Adapters, Cat. # 022638785 arediscounted, brand-new, and includes a 6 Month Full Parts and Labor Warranty.

Hoefer SUB20C Maxi-Cooled Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 20 x 20 cm Maxim (more)um Power Settings 1000 V, 500 mA, 500 W Maximum Buffer Volume 2.2 L Features - Large format‐20 x 20 cm gel tray is ideal for high resolution techniques - Multichannel pipette compatible combs—with a maximum 40 sample throughput reduce gel loading time - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory - Cooling tray with 20 x 20 cm gel capacity—maintains optimal conditions for high-resolution nucleic acid analysis The Hoefer SUB20C Maxi-Cooled Submarine Gel Electrophoresis Unit combines the high-resolution capacity of the SUB20 with enhanced cooling functionality, making it ideal for extended nucleic acid analysis. This unit is equipped with a spacious 20 x 20 cm gel tray and four comb positions, supporting up to 168 samples, perfect for labs that need both precision and efficiency. Designed to prevent heat buildup during long runs, the SUB20C includes a cooling tray to maintain optimal conditions, reducing the risk of sample degradation. In addition to the standard features—color-coded, height-adjustable combs, multichannel pipette-compatible combs, and buffer recirculation ports for stable pH—the SUB20C offers a UV-transparent running tray for direct imaging, colored loading strips for easy well identification, and side handles for safe transport around the lab. INCLUDED: The Hoefer SUB20C Maxi-Cooled Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly with Cooling Ports - Safety Lid - High Voltage Leads - Running Tray with Casting Gates - 1 mm thick, 16 well combs, 2 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F2 Mass Standard - slotted weights. Nominal value - 20 kg.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Shimadzu SPD-M10A Diode Array Detector (DAD). Light Source: D2 lamp, W lamp, or both (3 modes). Wave (more)length Range: 190 – 800 nm. Wavelength Accuracy: 1 nm. Noise Level: 0.8 x 10-5 AU (250 nm, 600 nm). Drift: < 1 x 10-3 AU/hr (250 nm, 600 nm). User manual.