Zeiss Axio Vert.A1 FL Inverted Transmitted Light Microscope Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Nikon Binocular Transmitted Light Microscope Nikon Eyepiece CFW10x Nikon Achr 0.9 Condenser Nikon Bi (more)nocular (PN 176160) Objectives: Nikon 10x/0.25  Carl Zeiss 40x/0.65 (PN 4807144) Nikon Fluor 40x/0.85 (PN 332679) Nikon UV-F 100×1.3 (PN 332281)

THis was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)none of the objectives are particularly clear, and two don't show an image at all (detailed below). The unit is quite stiff and awkward to use. For these reasons it is sold for spares/repairs. It is in reasonable good cosmetic condition with minor marks. 2x Carl Zeiss Kpl 8x Eyepieces 1x Leitz Wetzlar H 20x/0.40 ∞/1.80 Quarzgl. (no clear image) 1x Carl Zeiss 4494688 Ph2 40x/0.75 160/0.17 1x Carl Zeiss 4459404 Ph2 NEOFLAUR 25x/0.60 160/0.17 1x Carl Zeiss 4836489 Ph2 NEOFLAUR 16x/0.40 160/- 1x Carl Zeiss 4111437 Ph3 NEOFLAUR 100x/1.25 oil 160/- (no clear image). 1x Carl Zeiss Nose Piece III RS 46 62 49-9904 1x Carl Zeiss Stage 47 33 56-9901 1x Carl Zeiss Condenser 4680811 1x Carl Zeiss Microscope power supply 47 20 83 6 volt and 12 volt output. 1x Carl Zeiss Lamp power supply VHW 50f-2b 39 26 41 showing 365 hours and 55 minutes. 1x Carl Zeiss Lamp 12 volt 100 w 46 8019-9901 1x Carl Zeiss Lamp HBO 50 w 46 80 32-9902

Nikon OPTIPHOT-2 Microscope System with Sony CCD-IRIS Camera This system was removed from a universi (more)ty lab where it was surplus to requirements. All included item are in good cosmetic condition. The microscope powered on via test leads due to a disconnected door trip switch.Voltage selector, lamps, and stage movement are all functioning correctly. The cabinet is faulty, but the scope inside is operational. System Components: - Microscope Base: Nikon OPTIPHOT-2 with Nikon Transformer Model UN - Objectives Included: - Nikon 241187 M Plan 40/0.40 210/0 SLWD - Nikon 322002 M Plan 100 0.90 Dry 210/0 - Nikon 322580 M Plan 60 0.80 210/0 - Nikon 334439 M Plan 40 0.65 210/0 - Nikon 328356 M Plan 20 0.4 LWD 210/0 - Additional Equipment: - Bruker Infrared Microscope Power Supply - Door Trip Switch Override - Sony CCD-IRIS Camera Condition and Testing:The microscope was powered on using test IEC leads due to the door trip switch being disconnected, preventing a direct power connection.- Voltage selector is operational. - Both lamps power on as expected. - Stage movement is functioning correctly.

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

EG&G Polarographic Analyzer System Model 384B with 303A Dropping Electrode These were removed fr (more)om a university lab where they were surplus to requirements. Both units have been powered up but we were unable to test them further at our facility. Included are; 1x EG&G Polarographic AnalyzerModel 384BThe unit powers on and is in good cosmetic condition. 'BLANK SWV' appeared on the screen after the analyser had powered up. None of the buttons appeared responsive. 1x EG&G Stating Mercury Dropping Electrode (SMDE, DME, HMDE)Model 303AThe unit powers on and is in good cosmetic condition. We were unable to test it. Accessories: 1x EG&G Operating DisketteRevision: F0The unit is in good cosmetic condition. The diskette goes into the back of the polargraphic analyser in the disk drive. 'BLANK SWV' appeared on the screen after the analyser had powered up. 1x EG&G Polargraphic Analyzer user manual 1x EG&G StirrerModel 305The unit powers on via the SMDE and is in good cosmetic condition.The stirrer works in MANUAL mode, and both the slow and fast speeds are working. We could not get the stirrer to work in AUTO mode. 2x Ametek Data DiskModel 394Rev 2.01The units are in good cosmetic condition, they are not compatible with the unit. more likely for a PC, 7x 25ml Glass cupsThe units are in good cosmetic condition 5x 50ml Glass cupsThe units are in good cosmetic condition. 1x Ribbon cables RS232The unit is in good cosmetic condition 1x Cell compartment controller cableThe unit is in good cosmetic condition,it provides power from the 384B Analyser to the 303A SMDE

Corepoint Scientific LF301WWW-0M -15C to -20C Single Swing Solid Door Freezer Temperature Setpoint R (more)ange -15°C to -20°C Capacity 30 cu. ft. Defrost Method Manual Features - Four fixed shelves - High density urethane foam cabinet and door insulation - Magnetic door gasket for positive seal - Heavy duty door handle The Corepoint Scientific LF301WWW-0M Single Swing Solid Door Freezer is a powerhouse designed for demanding environments like industrial, clinical, and research laboratories. With a substantial 30 cubic feet of storage capacity, it operates efficiently between -15°C to -20°C, managed by a mechanical thermostat for consistent temperature control. The freezer is constructed with high-density urethane foam insulation, ensuring optimal thermal efficiency and is enclosed in a durable powder-coat steel exterior. Key features include a solid, right-hinged door with a magnetic gasket for a secure seal, heavy-duty handle, and four fixed shelves that provide ample storage space. Safety and security are prioritized with a keyed door lock and a probe access port allows for external temperature monitoring without disrupting the internal environment. The unit supports manual defrosting to maintain peak performance and includes leveling legs for easy installation on uneven surfaces. Backed by a comprehensive 1-year parts and labor warranty with an additional 4 years on compressor parts, the Corepoint Scientific LF301WWW-0M Freezer combines reliability, spaciousness, and security to meet the rigorous demands of professional settings. INCLUDED: The Corepoint Scientific LF301WWW-0M -15C to -20C Single Swing Solid Door Freezer includes: - Key for Door Lock - 4 Fixed Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty