Leica DMIL

Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor The FiberLite F15-8x50cy rotor is brand new (more), and designed for use with Thermo Scientific XT/XF Series, X1/X3 Series, SL40F centrifuges. Constructed from lightweight carbon fiber for enhanced performance and durability, this rotor is designed for exceptional structural integrity and wear resistance. Capable of reaching up to 14,500 rpm, it achieves higher G-forces for shorter centrifugation times and accommodates a capacity of 8x50ml conical tubes. INCLUDED: The Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor includes: - Rotor Lid - Manufacturer's Documentation - 1 Year Full Parts and Labor Warranty Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor SpecificationsMaximum Speed14,500 RPMMaximum RCF24,446 x gMaximum Capacity8 x 50 mL Conical TubesMaximum Radius10.4 cmCentrifuge CompatibilityThermo Scientific XT/XF, X1/X3, SL40F Series CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Labconco RapidVap N2 Evaporation System with RS-232 LinkThe RapidVapN2 Evaporation Systems offer a m (more)ore efficient, automatic alternative toKuderna-Danish and rotary evaporators and may be used with a broad range ofaggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gasis directed downward onto the surface of the sample. Nitrogen blow down reducesthe partial pressure directly over the liquid to speed evaporation and helpremove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 orall 8 tube locations. Vortex motion and dry heat may also be applied to furtheraccelerate processing. The block holds eight large samples, up to 450 milliliters each, making itefficient for environmental and residue testing. An accessory block that holdseight 170 milliliter tubes suitable for solid phase extraction is alsoavailable. In many of these applications, the samples should not go to dryness.The unique Cool-Zone block and tube design significantly reduces theevaporation rate after end point is achieved. The Cool-Zone insulates thesamples and allows the researcher adequate time before the samples reachdryness to remove them or to perform solvent exchange procedures. Alarms thatsignal when timed end point has occurred and when the RapidVap senses that theprocess is nearing completion allow for unattended operation.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA EUROSTAR 60 control Package S001 EUROSTAR 60 control packageThis package for the IKA Eurostar 60 (more) Control Overhead Stirrer includes the EUROSTAR 60 control, R 2723 Telescopic stand, R 271 Boss head clamp, R 1345 Propeller stirrer (4-bladed), and RH 5 Strap clamp. The IKA Eurostar 60 Control is a universal laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts speed through microprocessor-controlled technology within the range of 0/30 - 2000 rpm. The stirrer features RS 232 and USB interfaces for controlling and documenting all parameters. An integrated torque trend display measures viscosity changes. Safety circuits ensure automatic cut-off in case of anti-stall or overload conditions. Continuous comparison of shaft speed to the desired speed is maintained, with automatic adjustments to guarantee constant speed despite viscosity changes in the sample. Key features include a multilingual TFT display, programmable functions, integrated temperature measurement, interval operation, timer function, adjustable safety circuit, locked function, infinitely adjustable speed, push-through agitator shafts, overload protection, short-term overload operation, slim casing, quiet operation, and an error code display.

Benchmark A1705 Agarose LE, 500gBenchmark Agarose LE is a highly purified agarose, suitable for a va (more)riety of molecular biology applications. It is refined using an advanced process that excludes the use of organic solvents, yielding a cleaner end-product with a significantly reduced environmental impact. Agarose LE can be used for analyses of nucleic acids and proteins of various sizes (150 bp to 25 kbp).Its low EEO (≤ 0.13-mr ) promotes increased electrophoretic mobility, yielding improved resolution and shorter run times. This also allows macromolecules and larger particles (subcellular fragments, viruses, etc.) to migrate more freely through the gel matrix. The consistently low EEO also provides a reduction in band distortion (caused by counter flow) that can result from the presence of excessive sulfate-rich negative ions. Agarose LE is widely used for nucleic acid electrophoresis (analytical and preparative), protein electrophoresis (including radial immunodiffusion) and various blotting protocols. It is easily soluble, free of nucleases, and easy to use. It is highly transparent (forms a clear, colorless solution at 1g:100ml H2O), and exhibits exceptionally low absorption of chemical staining agents. Pore size can be adjusted by simple modifications to the concentration ratio.Formulated for high gel strength and integrity, Agarose LE exhibits exceptional thermal stability and mechanical resistance, ensuring safe, easy handling, regardless of whether a denaturing agent has been added. Available in 25g, 100g and 500g quantities.INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Benchmark A1705 Agarose LE, 500g - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

Dimensions (WxHxD): 600 x 650 x 500 mm

This Parker General Valve Picospritzer III Microcellular Injection Unit was removed from a universit (more)y lab where it was surplus to requirements. The unit is in good cosmetic condition. We are unable to test this item further at our facility. No PSU is included.

Lauda CS 6-D recirculating bath with heating. Ambient temperature range +5ºC to +199.9ºC. Great temp (more)erature stability. Internal dimensions (HWD) 15 x 13 x 15 cm. External dimensions (HWD): 23 x 40 x 40 cm. It has some scratches and other cosmetic damage that does not affect its operation. The Lauda recirculating bath type CS6 is suitable for applications that require a precise temperature. It is equipped with a built-in circulation pump making it ideal for uniform heating of reaction mixtures.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.