Haver & Boecker Analysesieb 200X32 MM /W 0,106 MM 106 Mikrometer 00522637 Retsch

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 10 - 100 µl includes: - Two Year Manufacturer's Warranty

Eppendorf 6 x 7-17ml Adapters, Cat. # 022637584 New in box Eppendorf 6 x 7-17ml Adapters, Cat. # 022 (more)637584 for the A-4-44 rotor. This is a 2 piece set, and the adapters are new in their packaging. To be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 6 x 7-17ml Adapters, Cat. # 022637584 includes: - Full 6 Month Parts and Labor Warranty

LM2134 EG&G EC Detector, model 400

S+B Plinth Cabinet high RT White 420

Scope: Flexibility: Efficiency

Real Time PCR Cycler Corbett Rotor Gene 3000. Fully equipped for real-time amplification, endpoint a (more)nalysis, autocall genotyping, and nucleic acid concentration measurement. Rotor for  72 0.1 ml strip tubes. Excitation source 470nm, 530nm, 585nm, 625nm high power LEDs. 510nm, 555nm, 610nm and 660nm, 580nm, 610nm high pass and bandpass detection filters. Detected fluorophores Sybr-Green I, Fam, Tet, Joe, Vic, Max, Rox, Tamra, Cy3, Cy5, Cy5.5, Tex Red. Temperature range 25 - 99 ° C. Heating / cooling range 2.5 ° C / sec (tube temperature); uniformity +/- 0.01 ° C. Includes PC and software. User manual. Real Time PCR Cycler Corbett Rotor Gene 3000. The Rotor-Gene multi-filter system can detect all available real-time chemistries including Sybr-Green, dual-labelled and MGB probes, FRET and Molecular Beacons.Most DNA amplification enzymes/ buffers can be used on the system to generate Quantitation/Melt data. It is not necessary to use expensive kits that are specific to the instrument. Additionally, Rotor-Gene offers the most user-friendly real-time analysis software system currently available. Using an experiment Wizard, a new real-time protocol can be setup within a matter of minutes in a few easy to follow steps.

Ohaus PX163 Pioneer Precision Balance, 160 g, 0.001 g Maximum Capacity 160 g Readability 0.001 g Rep (more)eatability (Typical) 0.001 g Features - Maximum capacity of 160 g with a readability of 0.001 g - InCal™ semi-automatic internal calibration for maintaining accuracy - Stainless steel weighing pan with an 120mm diameter for durability - Backlit 2-line LCD display with additional information or guidance on the second line - 2-second stabilization time for quick and reliable measurements - Durable construction with a cast metal lower housing and plastic top housing - Glass draftshield included for protection and stability during weighing - USB and RS-232 connectivity for easy data communication - Static removal bar for convenient grounding and reducing static interference - Integrated weigh-below-hook for specialized weighing applications The OhausPX163 Pioneer PX Precision Balance combines essential weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX163 weighing plate has a maximum capacity of 160 gramswith a readability of 0.001 grams and a weight stabilization time of 2 seconds.The PX163 is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication.Click Here to View Product Video INCLUDED: The Ohaus PX163 Pioneer Precision Balance, 160 g, 0.001 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Eurostar 100 Control Overhead Stirrer Speed Range 0/30 to 1,300 RPM Viscosity Max. 70,000 mPas (more) Stirring Quantity Max. 100 l Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Reverse function - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Quiet operation - Error code Display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery Powerful laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 1300 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 100 Control Overhead Stirrer includes: - EUROSTAR 100 control - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 100 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)100 lMotor rating input174 WMotor rating output142 WMotor principleBrushless DCSpeed displayTFTSpeed range0/30 - 1300 rpmReversible direction of rotationyesIntermittent operationyesViscosity max.70000 mPasOutput max. at stirring shaft 136 WPermissible ON time 100 %Torque max. at stirring shaft 100 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesSpeed controlelectronicNominal torque1 NmTorque measurementtrendDeviation of torque measurement I6 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 267 x 230 mmWeight4.7 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input186 WComparison of IKA Eurostar Control Overhead StirrersSpecsEurostar 20Eurostar 60Eurostar 100Eurostar 200Eurostar 400Stirring quantity max. per stirring position (H2O)20 l40 l100 l100 l150 lSpeed range0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity max.10000 mPas50000 mPas70000 mPas100000 mPas100000 mPasTorque max. at stirring shaft20 Ncm60 Ncm100 Ncm200 Ncm400 NcmPower input176 W176 W186 W130 W226 WSetting accuracy speed1 ±rpm1 ±rpm1 ±rpm1 ±rpm1 ±rpm.comparison-table tr td:nth-child(4) { background-color: #fffacd;}DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote