Lab Oven SLN 15 smart POL-EKO

The 4titude a4S Automatic Heat Sealer requires no air supply, enabling the flexibility to be used on (more) standard lab benches as a stand-alone unit, or integrated within a robotic set up. The unit features a rapid heating element for quick start-up, and the stand-by function saves energy when the unit is not in use. The 4titude a4S Automatic Heat Sealer is compatible with a wide range of SBS footprint plates, including all PCR plate formats from 96 well to 1536 well, assay plates, deep well storage plates and microplates. Varying plate heights, from 3 mm to 60 mm can be accommodated with minimal adjustments of the instrument. Plates are presented in the portrait format and the plate position on the shuttle allows good access for robotic integration. Rolls with a width of between 75-85 mm can be loaded in either of two roll positions, depending on roll length and available space, enabling the 4titude a4S Automatic Heat Sealer to fit under the gantree of most liquid handling robots. The width and length of the applied seals are set to precisely cover an SBS footprint plate without interfering with plate stacking. The seal position can be adjusted to give an overhang at one end of the plate to facilitate ease of seal removal. Specifications: Sealing Temperature Range: 100 – 195°C Sealing Time Range: 0.1 – 10 Sec Connection: RS-232 Serial Port, USB Port Dimensions: 230 x 507 x 276 mm Weight: 27 kg

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor. It is sold for spares/repairs

Bruker Microtof Bench Top ESI-TOF MS Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, with some damage sustained to the casing as displayed. It powers on, but we are unable to conduct further at our facility. The power supply cable is included.

Perkin Elmer Wizard2 Model 2470 Automatic Gamma Counter 2470-0100 This was removed from a universit (more)y lab where it was surplus to requirements. The unit has been professionally serviced and is in good working order. It is in great cosmetic condition with minor marks.

The high resolution MPS module operates on the basis of electromagnetic force converter. The device  (more)may be easily integrated into existing system owned by the customer. Compact design and integrated electronics provide various possibilities of MAS module adaptation into technological lines and installation inside laboratory equipment or devices. Measurements can be carried out using either weighing pan or under-pan weighing system, i.e. solution enabling the load to be suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. Innovative algorithm for automatic search of electromagnetic weighing modules facilitates connection to a computer. R Panel software makes complete functionality of the R series balances available via the PC. R Panel functionality has been implemented in RLab program as one of its numerous functions.

This listing is for a Biotest Hycon RCS Air Sample Plus Air Sampler.The unit is in full working cond (more)ition and is ready for immediate release.The Biotest Hycon RCS Plus Air Sampler is a highly reliable microbial air sampling system designed to monitor the microbiological quality of ambient air. It is widely used across multiple industries such as pharmaceuticals, food and beverage, healthcare, and other sectors where air quality is critical. This device operates using the impaction principle, where airborne microorganisms are captured onto an agar strip via centrifugal force for subsequent analysis.Key Features:Impaction Sampling Method: Separates and captures airborne microorganisms onto an agar strip for precise microbiological analysis.Sampling Volumes:7 preset sampling volumes: 10, 20, 50, 100, 200, 500, and 1000 litres.3 user-defined volumes adjustable between 1 to 1999 litres, providing flexibility for various sampling requirements.Intrinsic Safety: Certified to ignition class “ib,” which ensures safe operation in explosion hazard or hazardous areas.GMP and FDA Compliance: The device meets industry-standard Good Manufacturing Practice (GMP) and FDA guidelines for use in regulated environments.Adaptability: Customizable settings to fit user-specific needs and different air sampling conditions.Ergonomic Design: The lightweight and portable design allows for ease of use in routine air quality monitoring tasks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA Pette Vario 0.5 - 10ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 0.5 - 10ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 0.5 - 10ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range0.5 - 10 µlIncrements0.01 µlAccuracy (Nominal Volume µl / %) ± 0.1 µl / 1.0%Precision (Nominal Volume µl / %)± 0.04 µl / 0.4%Accuracy (50% of Nominal Volume µl / %)± 0.075 µl / 1.5%Precision (50% of Nominal Volume µl / %)± 0.04 µl / 0.8%Accuracy (10% of Nominal Volume µl / %)± 0.025 µl / 2.5%Precision (10% of Nominal Volume µl / %)± 0.018 µl / 1.8%