Branson 1/4" Tapered Microtip

Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor The FiberLite F15-8x50cy rotor is brand new (more), and designed for use with Thermo Scientific XT/XF Series, X1/X3 Series, SL40F centrifuges. Constructed from lightweight carbon fiber for enhanced performance and durability, this rotor is designed for exceptional structural integrity and wear resistance. Capable of reaching up to 14,500 rpm, it achieves higher G-forces for shorter centrifugation times and accommodates a capacity of 8x50ml conical tubes. INCLUDED: The Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor includes: - Rotor Lid - Manufacturer's Documentation - 1 Year Full Parts and Labor Warranty Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor SpecificationsMaximum Speed14,500 RPMMaximum RCF24,446 x gMaximum Capacity8 x 50 mL Conical TubesMaximum Radius10.4 cmCentrifuge CompatibilityThermo Scientific XT/XF, X1/X3, SL40F Series CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

VACUUBRAND BVC Basic Fluid Aspiration System Control Range 100 to 500 mbar Collection Bottle 4L Pol (more)ypropylene Max. Back Pressure (abs.) 1.1 bar Features - Mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network. - Stable base and electricity-free operation for convenience. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory. - Aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media. - Hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced; autoclavable as complete unit together with the collection bottle. The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle. INCLUDED: The VACUUBRAND BVC Basic Fluid Aspiration System includes: - Complete Fluid Aspiration System for current Vacuum Source - Hose Nozzle DN 6/10mm - VacuuHandControl VHC Aspiration Hand Set - 4L Collection Bottle - Protection Filter - Operator's Manual - 1 Year Manufacturer's Warranty

Vinitex Plinth Cabinet for Fume cupboard with Wheels behind 550x520x810

This was removed from a university lab where it was surplus to requirements. The system powers up an (more)d communicates with the PC and Software. It has not been tested further. It is in good cosmetic condition with minor marks. Applied Biosystems MDS SCIEX QSTAR EliteAssy no. 1017064SN - AP10870612 Parts inside identified:-2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS1 x Leybold Vacuum Turbovac TW 250 S1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 0550009281 x Inficon VGC0231 x Spellman Unit1 x 024143 Nanospray Switch Module Pump on wheels:-MDS SCIEX Assy no. 022832, SN - 70208570839 Pump Inside unit:-Varian DS 602, Model 949-9335, SN - 245808With Varian Oil Exhaust Filter NW25 coming out of topModel - 949-9392Powers on and appears to be in working condition. Dell PC:-MDS SCIEX PN - 1018761Computer - P670 with ImageComes with Dell 17" Monitor,Keyboard & MousePC Powers on and has Analyst QS 2.0 SoftwareUsername - Administrator, No Password Spare parts & accessories:-1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 08610507071 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 3119703121 x Part 022765-B CFN 06851 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates1 x Box labelled Nano flow head with part inside1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on1 x Ionwerks TDCx81 x SCIEX PN - 1009917, SN - 000519 - Powers on1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards1 x MDS SCIEX PCB Interconnect, 022102-D, CFN2 x Boxes labelled QStar elite parts - Full of small parts2 x Leybold Vacuum TurboVac TW 690 MS1 x 024143 Nanospray Switch Module1 x 1002133 Signal Handling Module1 x Harvard Apparatus Cat no. 98-0921, SN - 148161 x Inficon VGC023, SN - 399-557 - Powers on2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS1 x Oerlikon Leybold Vacuum TW 250 S, SN - 209004514962 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 113500701221 x SCIEX Ionspray, Assy no. 017614, SN - 6560307081 x QLP 022353-A1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on7 x Gold Modules:-QPS Amplifier 1010829CCPS 1017191Lens PS 1024829QPS Exciter 1008444System Controller 1008411DACS & Vaccum Gauge 1024717HVPS 1012202 5 Folders of Manuals, service records, Hardware guides and Logbooks

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Polyscience P60NNA101B IP-60 Immersion Probe Cooler, 1.5” Ø Rigid Coil Probe with 180° bend, -60° to (more) -20°C, 120V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60NNA101B IP-60 Immersion Probe Cooler, 1.5” Ø Rigid Coil Probe with 180° bend, -60° to -20°C, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.