Mettler Toledo PB303-S DeltaRange 310g 0.001g Precision Balance Präzisionswaage

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Glass-made draft shield for precision balances with 128 x 128 weighing pan. Designed to prevent the  (more)balance from the influence of unfavourable ambient conditions (air drafts) at the place of use. The glass-made shield is installed instead of the plastic one, it is seated on a positioning pin. A compact design facilitates unrestricted access to the weighing pan.

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 2 m. Custom (more)ized cable length (extra charge): 5 m, 10 m.

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 10 m. Custo (more)mized cable length (extra charge): 2 m, 5 m.

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Heidolph Hei-TORQUE Ultimate 400 w/ USB & RS232 InterfaceThe Hei-TORQUE Ultimate 400 laboratory  (more)stirrer is ideal for the powerful stirring of viscosities up to 250,000 mPas or volumes up to 100 liters (H2O). Thanks to its 2-gear stage design, it stirs particularly powerfully in the speed range up to 400 rpm and is therefore particularly suitable for applications with highly viscous media that require mixing in the lower speed range. However, operation at speeds of up to 2,000 rpm is also possible in the second speed. In addition, the Hei-TORQUE Ultimate 400 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC. The laboratory stirrer Hei-TORQUE Value 400 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 400 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 400 w/ USB & RS232 Interface includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Co (more)nnection DN 63 ISO-K Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85The T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT85H Turbomolecular Pump with ISO63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For Branson 3800 Series Ultrasonic Cleaner.

Temperature range: 4°C to 50°C Digitally adjustable and digitally readable per 0.1°C Equipped with w (more)eek clock Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm