Centrifugation

Hermle Z327 Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Warranty 5 Year Manu (more)facturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z32-HK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control - (more) Active imbalance detection and cut-off - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection - Audible signal at the end of each run - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40C) - Autoclavable rotors - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10 increments - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Interested in rotors and/or adapters for this centrifuge?Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z32-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor Speed Range 200 to 14,000 RPM (4, (more)500 RPM with included rotor) Maximum Capacity 4 x 200ml (2 x 3 Microplates with included rotor) Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor-specific) - Imbalance tolerant drive - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 61010 - Audible signal at the end of each run with several melody options - Rotor exchange is easy to handle - Noise level under 63 dBA at maximum speed - Improved ventilation system keeps samples cool - Stainless steel chamber The Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor is a powerful and versatile laboratory tool that can handle a wide range of centrifugation tasks. With a speed range of 200 to 14,000 RPM (4,500 RPM with the included rotor) and a maximum RCF of 16,624 x g (2,716 x g with the included rotor), it can accommodate up to 2 x 3 microplates. The centrifuge also features a timer that can be set for up to 99 hours and 59 minutes, as well as the ability to program up to 99 different centrifugation programs. The Z307 compact universal laboratory centrifuge offers a wide range of applications covering clinical, research, and industrial laboratory use. The Z307 offers many accessories, including rotors for microplates and high speed fixed angle rotors for microtubes and centrifuge tubes up to 50 ml. The swing out rotors can load all common tubes such as blood collection tubes,15/50 ml tubes and even 200 ml tubes. This wide range of accessories makes the Z307 laboratory centrifuge indispensable in research laboratories and clinical hospital laboratories. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor includes: - Z307 Centrifuge - Z326-02MP 2 Place Swing Out Microplate Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z307 Centrifuge Speed Range 200 to 14,000 RPM Maximum Capacity 4 x 200ml Warranty 5 Year Manu (more)facturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor-specific) - Imbalance tolerant drive - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 61010 - Audible signal at the end of each run with several melody options - Rotor exchange is easy to handle - Noise level under 63 dBA at maximum speed - Improved ventilation system keeps samples cool - Stainless steel chamber The Z307 compact universal laboratory centrifuge offers a wide range of applications covering clinical, research, and industrial laboratory use. The Z307 offers many accessories, including rotors for microplates and high speed fixed angle rotors for microtubes and centrifuge tubes up to 50 ml. The swing out rotors can load all common tubes such as blood collection tubes,15/50 ml tubes and even 200 ml tubes. This wide range of accessories makes the Z307 laboratory centrifuge indispensable in research laboratories and clinical hospital laboratories. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z307 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-RotorFeatures - Designed to be compact, quiet, and p (more)owerful - Features high speeds up to 15,000 RPM and 21,631 x g - Program storage for up to 99 programs - 10 acceleration and 10 deceleration rates - Timer function up to 99 hours, 59 minutes or continuous operation - Imbalance identification system with automatic shut-off - Maintenance free induction drive - Motor driven safety-lid lock - "K" models feature a powerful CFC-free refrigeration system with a temperature range of -20°C to 40°C - "K" models also feature a pre-cooling function and reaches 4°C from room temperature in less than 10 minutes Features an easy to use control panel with the ability to display RPM/RCF, adjust acceleration/deceleration rates, change alarm tones, and much more The Z216 Series benefits directly from the versatility of 11 available rotor options for tube sizes between 0.2ml and 5ml Despite a remarkably small footprint in the lab, the Z216 series can nearly double the capacity of traditional microcentrifuges Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Micro (more)processor control - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M CentrifugeFeatures - Brushless induction drive - Microprocessor control - Active imbal (more)ance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge w/ 24 x 1.5/2.0ml Rotor Due to the compact design, the Microlitre Centrifug (more)e Z207-M, is applicable even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - 24 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge Due to the compact design, the Microlitre Centrifuge Z207-M, is applicable  (more)even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge w/ 6 x 50ml RotorFeatures - Microprocessor control - Active imbalance detec (more)tion and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 50ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge w/ 6 x 50ml Rotor includes: - 6 x 50ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle SIEVA-3 Filtration Centrifuge The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for (more) cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3 Filtration Centrifuge includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle OLEUM ROTOR PKG - Rotor Package (Complete with Rotor, Buckets and Inserts) The Hermle OLEUM R (more)OTOR PKG is a rotor package that includes a rotor, buckets, and inserts for use with the Hermle OLEUM Oil Testing Centrifuge. It has a maximum speed of 3,000 RPM and a maximum relative centrifugal force (RCF) of 2,213 x g, making it suitable for applications that require high-speed centrifugation. The package can process up to 4 x 100ml samples efficiently, and the rotor's unique design ensures accurate and reliable separation of samples by centrifugation. INCLUDED: The Hermle OLEUM ROTOR PKG - Rotor Package includes: - Z600-OL-COM Rotor - Z600-OL-BUK Buckets - Z600-OL-INS Bottom Inserts - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Compact Centrifuge with Combination RotorFeatures - Microprocessor with large LCD display - E (more)lectrical lid lock - Quick access to samples - Active imbalance identifi cation and cut-off - Air Cooling System - Quick Acceleration and Deceleration - Noise level < 60 dBA, at max. speed - Easy removal of rotor, without tools - Manufactured in accordance to International - Safety Regulations, i.e. IEC 61010 The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there's no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Centrifuge with Combination Rotor includes: - Combination Rotor - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Compact Hematocrit Centrifuge Due to its compact design the Z207-H Hematocrit Centrifuge is t (more)he perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Hematocrit Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges The Hermle 4 x 500ml Angle Rotor for Z4 (more)46/K and Z496 Centrifuges features a maximum speed of 8,000 RPM and a maximum RCF of 10,367 x g. This rotor is designed for use with the Hermle Z446 and Z496 Series. INCLUDED: The Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty