Grant Sub Aqua Pro Water Bath SAP18 Lab

Grant Sub Aqua Pro Water Bath SAP18 This item was removed from a university where it was surplus to  (more)requirement. The unit powers up and has been tested with a digital thermometer (not included). It is in good cosmetic condition.

Grant JB Aqua 18 Plus Water Bath Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however the handle has snapped off, this does not affect its functionality.

Julabo ED with Julabo F25 Refrigerated Circulator Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Thermometer used for testing not included). It is in good cosmetic condition with minor marks from use.

Grant Y14 Precision Thermostatic Bath. Capacity 14 L. Digital control. Temperature range from ambien (more)t +5 °C to 100 °C. Water circulation to achieve accuracy of ±0.2 °C at 37 °C. High quality stainless steel tank, corrosion resistant. Roof type lid. Overheat protection. Low water level alarm. Dimensions (WDH): tank 300*240*150 mm; external 380*330*330 mm. Manual not available. Elevate the precision of your laboratory with the Grant Y14 Precision Thermostatic Bath, available at Galileo Equipment. This 14 L unit features digital control and a temperature range of +5 °C to 100 °C, ensuring unmatched accuracy. Its robust, corrosion-resistant stainless steel design includes a canopy-type lid and overheat protection and low water level alarm systems. Perfect for researchers looking for reliable and consistent results. Find out more at www.galileoequipos.com.

Grant GD100 recirculating bath. Temperature 37 ºC. Bucket volume of 12 L. Digital thermostat. Visual (more) failure alarm. With cover. Includes user manual. The Grant GD100 immersion circulation bath is high-quality laboratory equipment that allows maintaining a constant and uniform temperature in liquid samples. With a capacity of 8 liters, this bath is ideal for a wide range of applications, from incubating cultures to preparing samples for laboratory testing. Equipped with a digital temperature controller and an efficient circulation system, the Grant GD100 bath ensures homogeneous heat distribution, resulting in higher precision in experiments. Plus, its compact and durable design makes it a reliable choice for demanding laboratory environments. Whether you work in scientific research, chemical analysis, or any other discipline that requires precise temperature control, the Grant GD100 Immersion Circulating Bath is an essential tool to help you achieve consistent and reliable results in your research.

Julabo SW22 Shaking Water Bath 115V/60Hz Working Temperature Range 20°C to 99°C Shaking Speed Range (more) 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW22 Shaking Water Bath 115V/60Hz includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus Scout STX1202 portable scale, with plate 170x140mm These balances are ideal for laboratory and (more) industrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

Brinkmann CH-500 Column Heater This item was removed from a university lab where it was surplus to  (more)requirements. It is in good cosmetic condition but is missing a screw for the side panel. The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W