Grant GP200 Stirred Water Bath

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

B5 Haake F6 Circulating Water Bath F6 Laboratory Chiller Brand: HAAKE Voltage: 230V, 50Hz Current: 9 (more)A Power: 2100 VA Thermostat temperature range: -60 to 250ºC Water bath content: 4.5 L External dimensions (W) x (D) x (H): 21 x 37 x 37.5 cm Internal dimensions (W) x (D) x (H): 14 x 15 x 15 cm

Refrigeration bath KB 18-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, seale (more)d, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Julabo PURA 14 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1300W V (more)olume 14L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 14 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO C-B27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 27L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

High-performance ultrasonic cleaner with heating for use in the practice, laboratory and workshop. T (more)he proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach places of the cleaning objects. A user-friendly rotary handle control is used for easy setting of the cleaning time and bath temperature. The fully automatic SweepTec function prevents standing waves in the ultrasonic field and achieves particularly even cleaning. Ultrasound frequency: 35 kHz Temperature setting: 30°C – 80°C Time setting: 1-15 min, continuous operation Capacity: 45 L Work content: 30 L Level marking: yes Tub material: Stainless steel V2A (1 4301) Tub thickness: 2 mm Inner dimension (LxWxH): 500 x 300 x 300 mm Dimension (LxWxH): 540 x 340 x 500 mm Included Cover: A suitable stainless steel lid for an ultrasonic bath protects the bath fluid from external contamination and prevents odour nuisance caused by the added cleaning or disinfecting preparations. In addition, the noise emission that may be perceived as annoying during operation of the ultrasonic cleaner is reduced. The lids are designed in such a way that any condensation water that arises is led back into the tank. Hanging basket: For holding sound reinforcement material; made of stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Sieve holder: For cleaning test sieves in an ultrasonic bath; stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Insert strip: The insert strip is used to hold the insert vessels. When using chemically aggressive liquids (e.g. TICKOPUR J 80 U), removing chemically aggressive or abrasive contaminants or sonicating sample liquids, insert cups are used (indirect sonication). Because nothing may be placed on the bottom of the ultrasonic bath. Another advantage: When using an insert strip, several insert beakers can be sonicated with different liquids at the same time (e.g. removal of dental cements with STAMMOPUR Z in one and cleaning with simultaneous chemical disinfection of dental instruments with STAMMOPUR DR 8 in a second insert beaker). Please note that the surface tension of the water must be reduced in order to transfer the ultrasound to the insert vessel and therefore a cleaning solution (e.g. TICKOPUR R 33 – 3%) must be used as a coupling liquid / contact liquid.

New generation of Ohaus portable scales These balances are ideal for laboratory and industrial appli (more)cations. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

Manufacturer: WAB Willy A. Bachofen AG Model: Turbula T10B Mixer YoM: 2010 We also have the TURBUL (more)A T2F for sale - just ask for it ! Description: The mixing basket can hold standard containers with a maximum volume of 17 litres. Twisted rubber clamping rings allow the use of smaller containers. The movement of the mixing basket is controlled by a silent pendulum chain drive. The rotational speed can be varied by adjusting the position of the round drive belt on the 4-step pulleys. The TURBULA® T 10 B is often used with preference for mixing pharmaceuticals or sintered metals and ceramic materials and for many other applications. TURBULA® mixers are used whenever minimum mixing times are required in combination with meeting the highest homogeneity standards, in any industry, in R&D and in production plants. • Diamond tools • Electrotechnology • Sintered metals • Ceramic industry • Cosmetic industry • Pharmaceutical industry • Chemical industry • Food industry • Analytics Specifications: Motor: 0.37 kW Connections: 3x 220-420 V, 50/60 Hz Speed: 15/23/32/44 min^-1 Standard container sizes: Ø 250x380 mm, max 17L container sizes with rubber clamping rings: max. Ø 225x375 mm Max load incl. container: 30 kg Dimensions (LxWxH): Closed 880 x 988 x 630 mm, Open 880 x 988 x 848 mm Weight: 135 kg Items delivered: - WAB Turbula T10B Mixer The Turbula T10B Mixer is in used but good cosmetic condition and 100% functional tested. Will be delivered in original crate.

F1 Mass Standard - rectangular weights. Nominal value - 50 kg.

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)& Shell FreezerFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable. Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700611300 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve & Shell Freezer 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark TubeRocker Compact Rocker The TubeRocker Mini is designed to provide the ideal speed and t (more)ilt angle (24 rpm / 30°) for agitation of sample tubes. The grooved design of the included rubber mat properly secures all tube sizes ranging from 1.5 to 50ml, without the use of added straps or bands. There are no complicated controls, no settings or adjustments to be made; just press the power switch and let it rock. Small in size (only 5 x 13 inches) and able to withstand temperatures from 4ºC to 65ºC, the TubeRocker Mini is small enough to fit on any lab bench and can conveniently be placed inside a cold room, refrigerator or laboratory incubator. INCLUDED: The Benchmark TubeRocker Compact Rocker includes: - Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty