Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

MEMMERT WNE 14 laboratory water bath Model: WNE 14 Temperature range: approx. 5 ° C above ambient te (more)mperature to +95 ° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 14 litres Internal dimensions (WxDxH): 350 x 140 x 290 mm External dimensions (WxDxH): 578 x 347 x 436 mm Mains: 230 V / 50 ... 60 Hz / 1800 W Weight: approx.: 16.0 kg Filling level at least 97 mm Filling level max. 120 mm Timer digital timer 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "hold time guarantee" Tested at 37°C and 70°C Alarm OK

Buchi R-210 Rotavapor Rotary Evaporator & Heidolph Heizbad WB Water Bath This was removed from  (more)a university lab where it was surplus to requirements. The system powers up and the motor and the water bath are in full working order. It is in reasonable cosmetic condition with marks and stains. Included are; 1 x Buchi RotavaporType - R-210SN - 0700006764Adjustable height from 47 to 57cm 1 x Heidolph Water BathType - Heizbad WBSN - 029902413

This Lauda RE210 Refrigerated Water Bath was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and was tested and calibrated with our digital thermometer(not included). It is in full working order but may need calibrating to your thermometers. It is in good cosmetic condition with minor marks from use.

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

The anti-draft chamber is intended for balances featuring a weighing pan 128×128 mm. It is an  (more)optional equipment for balances operating in unfavourable ambient conditions (air movement air drafts). It is installed as replacement of a standard pan draft shield. The anti-draft chamber features slidable top and side doors ensuring unbounded access to the weighing pan.

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Scilogex SuperPette Autoclavable Pipettor, 100-1000ulThe new SCILOGEX SuperPette fully autoclavable  (more)digital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 100-1000ul includes: - Two Year Manufacturer's Warranty

Eppendorf 5 x 50ml Adapters, Cat. # 022638769 New in box Eppendorf 5 x 50ml Adapters, Cat. # 0226387 (more)69 for the A-4-81 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 5 x 50ml Adapters, Cat. # 022638769 are used with the Eppendorf 5810/R Centrifuges. The Eppendorf 5 x 50ml Adapters, Cat. # 022638769 arediscounted, brand-new, and includes a Full 6 Month Parts and Labor Warranty.