Thermo Dionex CTC Ultimate 3000 XRS Open Autosampler OAS-3600XTRS 5845.0020

Beckman Coulter Biomek NXp Laboratory Automation Workstation This item was removed from a university (more) lab where it was surplus to requirements. The unit powers on and is in good cosmetic condition with some surface wear. Without the software, the robotic functions were unable to be tested, so no further functional testing was conducted. Model: Biomek NXpSerial No.: A318400876 Additional Components:- DFMZ Design Filtration Microzone - Model: DA1-1x2-2 - Serial No.: 952213 Accessories Included:- Insert Pak 11mm Non-Sterile - Serial No.: 3364 - 2 x Top Plate, Multi-Config Peltier ALP - Part Number: A32165 REV AA - 15 x Reservoirs, 75 ml, Case Sterile - Lot: P61122MPI - Physical Manual: Version 3.3 Tutorial

This Robins Scientific Hydra 96 Microdispenser System was removed from a university lab where it was (more) surplus to requirements. The unit powers up and functions. it comes with an emergency stop button and cover. It is in reasonable cosmetic condition with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eppendorf 16 x 3-15ml Adapters, Cat. # 022638721 The Eppendorf 16 x 3-15ml Adapters, Cat. # 02263872 (more)1 are for use with the Eppendorf A-4-81 Swing Bucket Rotor for the Eppendorf 5810/R Centrifuges. These adapters feature a capacity for 16 x 3-15ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 16mm x 108mm (130mm in 2 inner rows). This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 16 x 3-15ml Adapters, Cat. # 022638721 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 16 x 3-15ml Adapters, Cat. # 022638721 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-81 Swing Bucket Rotor

Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L- (more)A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 500ml adapters. INCLUDED: The Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk includes: - 1 x 500ml Flat Bottle Adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Statebourne Biostor 5 Liquid Nitrogen Cryogenic Storage Dewar Tank This was removed from a universi (more)ty lab where it was surplus to requirements. The unit is in very good cosmetic condition with minor marks from use. We believe it is a Biostor 5, though it is not marked as this. It has not been tested. 6 holder inserts. Triangular with one curved side. Sides are 20cm.46cm diameter. 78cm height w/o wheels. 88cm height w/ wheels.

HERMLE ZK-401 Refrigerated High Performance Centrifuge Maximum speed: 24,000 rpm Max. centrifugal fo (more)rce : 70,965 g (depending on rotor) Maximum filling quantity: 3000.0 ml (with suitable rotor) Power supply: 380V/50 Hz (CEE32 socket) 19.5A 11.0kVA Three-phase Dimensions: L x W x H = (825 x 765 x 940) mm Mass: approximately 320 kg Sound level: 69 dB(A) Setting temperature range: -20ºC to +40ºC Year of manufacture: 1990 Operating hours: 1403h With 5 rotors (4 fixed angular + 1 rotor with oscillating buckets): 2 X Fixed Rotor A12.17 Max speed: 16500 rpm For 12 tubes 1 X Fixed Rotor A6.14 Max speed: 14400 rpm For 6 tubes 1 X Fixed Rotor A8.24 Max speed: 24000 rpm For 8 tubes Equipment tested: 10000 revolutions => OK Cold group => OK Note: Commissioning must be carried out by a technician specialized in this type of high performance centrifuge

Agilent 7000 series GC/MS Triple Quad For sale: refurbished Agilent GC/MS QQQ including:  – 7000 ser (more)ies MS Triple Quad – 7890A GC with Multimode inlet – Software and computer Optional: 7693 injector with 150 vial tray Also available: Agilent 5973N MSD Agilent 5975 MSD Used Parts for Agilent 5793 and 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! For sale: refurbished Agilent GC/MS QQQ including:  – 7000 series MS Triple Quad – 7890A GC with Multimode inlet – Software and computer Optional: 7693 injector with 150 vial tray Also available: Agilent 5973N MSD Agilent 5975 MSD Used Parts for Agilent 5793 and 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty!

The Gene Pulser Xcell System is a flexible, modular electroporation system for transfecting every ce (more)ll type from primary, suspension, and difficult-to-transfect cells, including T cells, to bacteria and fungi. The system is composed of a main unit, two accessory modules, the capacitance extender (CE module) and the pulse controller (PC module), and a ShockPod cuvette chamber. Features and Benefits Universal electroporation — transfects all cell types, from primary, stem, and T cells to bacteria and fungi Flexibility with your experiment parameters for the highest transfection efficiency and viability Preset protocols — ready-to-use preoptimized protocols for frequently used mammalian and bacterial cell types Manual operation — allows for entry and storage of new parameters or editing of all parameters Optimization protocols — enables the best conditions to be determined using incremental voltage steps Exponential and square waveforms — allows for optimal delivery Confidence in your results — uses PulseTrac circuitry and arc-protection features to ensure sample protection and reproducible results Protocol library — collection of electroporation protocols for every cell type including primary, immortal, and bacterial cells Prevalidated published protocols — saves time optimizing conditions Easily accessed data management — storage and recall of parameters and results from previous 100 experiments, useful for troubleshooting Output Waveform: Exponential or square Output Voltage: 10 – 3,000 V Capacitance: 10 – 500 V, 25 – 3,275 µF in 25 µF increments, 500 – 3,000 V, 10, 25, 50 µF Resistance (parallel): 50 – 1,000 Ω in 50 Ω increments, plus infinity Sample resistance: 20 Ω minimum at 10 – 2,500 V, 600 Ω minimum at 2,500 – 3,000 V Square-wave timing: 10 – 500 V: 0.05 – 10 ms in 0.05 ms increments, 10 – 100 ms pulse in 1 ms increments, 1 – 10 pulses, 0.1 – 10 sec interval/ 500 – 3,000 V: 0.05 – 5 ms in 0.05 ms increments, 1 – 2 pulses, 5 sec minimum interval Dimensions (WxDxH): 310 x 300 x 280 mm Weight: 11.6 kg