Beckman Coulter Biomek NXp Laboratory Automation Workstation Lab

The ASP2000 is a precision micro-stepping, high torque drive “workhorse” liquid handler Autosampler  (more)that delivers robust performance for fast and accurate sample preparation and direct injection into UV and HPLC systems. The ASP2000 is suitable for a wide variety of applications with the ability to pierce multiple septa with very high accuracy and repeatability. It also has the ability to inject into tiny injection ports. This unique, near-perfect design of hardware and software performs sample processing tasks effortlessly with seamless integration with the IDIS data management system configurations. Including a Icalis DXi-50 pump and a Icalis RS8 remote serial controller.

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

This Genetix Qpix2 Benchtop Colony Picker was removed from a university lab where it was surplus to  (more)requirements. The lab said it was fully working prior to removal but unfortunately it seems like the dongle for the software has been misplaced. Included are; 1 x Genetix Qpix2 Benchtop Colony PickerInside dims - D67 W100 H35cmWe powered up the unit but were unable to test if further. Inside side panel of bottom unit - Jun-Air Model 400 Oil-Less Compressor - It powers on and works 1 x PC, Monitor, Keyboard &amp; Mouse - All power on and work, the pc has the software listed below. The item is in a reasonable, used cosmetic condition. Manuals/Software:-QPix2 User ManualReplicating Application GuideGridding Application GuidePicking Application GuideQSoft Data Tracking Application GuideQFill2 User ManualQScan User GuideaQuire User GuideDiscs:-QSoft xp Build 6400.16QSoft xp Build 6100.11QSoft xp Build 6300.01QScan beta 1QP2231 (Floppy Disk) Boxed Accessories/Consumables include:-Metrologic Scanner6 x Master PL-L 840/4P Light bulbsLots of various Slides inc. brands Genetix &amp; EZ-RaysGenetix Micro Spotting PinsGenetix Microarray Spotting SolutionVarious Packs of Glass Beads2 x Plastibrand Tip-RacksVarious other spare bits/parts16 x New &amp; Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)1 x Box of ISS 10ml Specimen Collection Tubes (QTY 500)

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner has notified us that the needle requires replacement. This item includes:- Phoenix/RE - DeeracFluidics Spot On - Melcor Thermoelectric Temperature Controller MTTC1410 - Various Cables and Wires

Beckman Coulter Biomek FXP Laboratory Automation Workstation This was removed from a university lab (more) where it was surplus to requirements. The system has been tested and is in good working order. The tiploader was tested with a compressor (not included). The software is installed on the PC and communicates with the system well. Included are; PC/Accessories:-Dell Optiplex 380Iiyama Prolite B2282HSDell PC &amp; MouseStarview 4 Port USB 2.0 KVM SwitchLots of cables (USB, Ethernet, RS232) Other Parts:-Beckman Coulter FX Device Controller Model - 717635 Inheco TEC Control 96SN - 958Powers on Cole Parmer MasterFlex Console DriveModel - 7520-67SN - G07004011Powers on Spare Beckman Coulter AccuFrameSPRIplate 96 - Ring (AGN - 000322)Removable Gripper Rod (REF-394069)4 x Spare plates2 x Nalgene 2Gal BottlesBox of spare plate stands Consumables included:-1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 1001 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 154 x Packs - Unknown Packs - Qty 201 x Box - Beckman SPAN 8 Tube Tool Kit

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to  (more)requirements. The system powers up but has not been tested further at our facility. The system is in very good cosmetic condition with only minor marks from use. Included are; 1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific 1250 Pump.Set of Accessories

Hotplate made of ceramic glass which offers excellent chemical resistance. Heating temperature range (more): 50 – 500°C Heat control: Turning knob Set temperature resolution: ±10 K Volume max.: 5 l Heating rate heating plate: 2.5 K/min Set-up plate material: ceramic Set-up plate dimensions: 100 x 100 mm Dimensions (WxHxD): 150 x 105 x 260 mm Weight: 2.44 kg

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

The antivibration table has been designed to eliminate ground vibrations during the operation of lab (more)oratory equipment such as microbalances, analytical balances and others. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the table is made of powder-coated steel, and the tabletop is made of MDF.

Eppendorf 1 x 250ml Flat/175-225ml Conical Adapters, Cat. # 5804787005 The Eppendorf 1 x 250ml Flat/ (more)175-225ml Conical Adapters, Cat. # 5804787005 are for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 1 x 250ml flat bottom bottle or 1 x 175-225ml conical bottle each with the maximum tube dimensions (Diameter x Height) of 62mm x 130mm. This is a two piece set, and the adapters are new in packaging. (Please note that conical bottles need to be used together with a conical form insert provided by the manufacturer who provided the bottles.) INCLUDED: The Eppendorf 1 x 250ml Flat/175-225ml Conical Adapters, Cat. # 5804787005 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 1 x 250ml Flat/175-225ml Conical Adapters, Cat. # 5804787005 SpecificationsBottom ShapeFlatRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor