CyBio CyBi-Well Automated Simultaneous Pipettor System Lab

Thermo Scientific Cytomat Microplate Hotel With Towers This item was removed from a university where (more) it was surplus to requirement. It powers on and is in very good cosmetic condition, we are unable to conduct further testing at our facility. Includes the following microplate towers:2 x Cytopmet P237 x Cytomet P69 Also Included:1 x data cable1 x Cytomat Configuration CD

Beckman Coulter Biomek FXP Laboratory Automation Workstation This was removed from a university lab (more) where it was surplus to requirements. The system has been tested and is in good working order. The tiploader was tested with a compressor (not included). The software is installed on the PC and communicates with the system well. Included are; PC/Accessories:-Dell Optiplex 380Iiyama Prolite B2282HSDell PC & MouseStarview 4 Port USB 2.0 KVM SwitchLots of cables (USB, Ethernet, RS232) Other Parts:-Beckman Coulter FX Device Controller Model - 717635 Inheco TEC Control 96SN - 958Powers on Cole Parmer MasterFlex Console DriveModel - 7520-67SN - G07004011Powers on Spare Beckman Coulter AccuFrameSPRIplate 96 - Ring (AGN - 000322)Removable Gripper Rod (REF-394069)4 x Spare plates2 x Nalgene 2Gal BottlesBox of spare plate stands Consumables included:-1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 1001 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 154 x Packs - Unknown Packs - Qty 201 x Box - Beckman SPAN 8 Tube Tool Kit

Thermo Scientific Spinnaker Robotic Arm F01981 Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate. This item also includes the following: - Emergency Stop Button - MicroPlate Mount

This Vysis VP 2000 Processor Genetic Analysis System was removed from a university lab where it was  (more)surplus to requirements. Model: VP 2000 ProcessorSerial#: 30905 The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility.

Rodwell Ensign 125 Autoclave This item was removed from a university lab where it was surplus to req (more)uirements. The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.The item is due for a service, and no further testing was conducted. The previous client has stated it was in working order prior to removal. Specifications:- Model: Ensign 125 - Serial No.: 1861 - M24 Controller

Samples and applications - Homogenization of food (milkshakes, homogenised food, drinks) - Preparati (more)on of stuffings for food (e.g. meat, vegetables) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 40 mm - Stator/rotor gap: 8 mm - Volume (H2O): 1000 - 4.000 ml - Immersion depth: 40-175 mm - Max. speed: 20,000 rpm - Max. circumferential speed: 18.8 m/s - Ultimate fineness, emulsions: - - Ultimate fineness, suspensions: - - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Branson M8800 Mechanical Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, as well as the ability to set continous operation Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Click Here to View Product Video INCLUDED: The Branson M8800 Mechanical Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW