Varian Prostar HPLC Units 430 Autosampler, 2 x 210 Solvent Delivery Modules Lab

This Thermo Scientific Surveyor HPLC System was removed from a university lab where it was surplus t (more)o requirements. Included are; 1 x AutosamplerPart no. SRVYR-AS 1 x MS PumpPart no. SRVYR-MPUMP 1 x PDA Plus DetectorPart no. SRVYR-PDA5P All the components power up but have not been tested further. They are in reasonably good cosmetic condition but have marks from use.

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

Dionex ICS-90 Ion Chromatography System with AS-40 Autosampler This was removed from a university l (more)ab where it was surplus to requirements. The system has been professionally serviced. A full report is available on request. It is in good cosmetic condition with minor marks. Included are; Dionex AS40 Automated SamplerModel: AS40-1Serial#: 04050451 Dionex ICS-90 Ion Chromatography SystemModel: ICS-90Serial#: 02040303

A Simple Western size assay is an automated Western – no gels, no transfer devices, no blots, no fil (more)m and no manual analysis. Simple Westerns take place in a capillary. Wes automates all steps of the process for you including sample loading, protein separation, immunoprobing or labeling, washing, detection and data analysis. Up to 25 samples can be processed in a single run. Wes performs Simple Western size-based assays: Immunoassay and Total Protein assay. All you have to do is pipette your samples and immunoreagents into Wes’s pre-filled plate, load the capillary cartridge and press start. Sample Required Total Protein: 0.3-1.2 µg lysate Sample Required Immunoassay Charge: 0.6-1.2 µg Volume Required Total Protein: 3 µL/well Volume Required Immunoassay Charge: 3 µL/well Size or pI Range Total Protein: Molecular weight (MW) ladders range from 2-440 kDa Size or pI Range Immunoassay Charge: Molecular weight (MW) ladders range from 2-440 kDa Sizing CV Total Protein: <10% Sizing CV Immunoassay Charge: <10% Intra-assay CV Total Protein: <15% Intra-assay CV Immunoassay Charge: <15% Resolution (± percent difference in MW) Total Protein: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Resolution (± percent difference in MW) Immunoassay Charge: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Quantitation CV Total Protein: <20% Quantitation CV Immunoassay Charge: <20% Dynamic Range Total Protein: 2-3 logs Dynamic Range Immunoassay Charge: 3 logs Sensitivity Total Protein: ng Sensitivity Immunoassay Charge: Low pg Capillary: 5 cm, 100 µm, 400 nL Dimensions (HxWxD): 360 x 360 x 570 mm Weight: 23 kg

Defender 6000 advanced IP68/IP69k washable bench scale Versatile, precise and extremely resistant. S (more)uitable for extreme humid environments, the new Defender® 6000 bench scale has been designed to offer an IP69K degree of protection and meet the hygienic demands of the chemical and food industries. For years, operators in the food, chemical and pharmaceutical industries have chosen Defender bench scales from OHAUS for their exceptional reliability, accuracy and versatility. - Resistant to intensive washdowns in processing and packaging environments: IP68/IP69K, - NSF certified and supports HACCP systems with a 316 stainless steel base: Corrosion protection in food and chemical processing and packaging. - Large display and different application modes - Connectivity: GLP/GMP data output with real-time clock Control panel DT61PW, for Defender 6000 Hybrid Easy to use thanks to its five buttons and its large and bright LCD screen. They offer an optional infrared communication kit to connect without opening the housing. The indicator is capable of storing up to 1,000 weighing results which can be transferred to a PC or system for traceability. PW models can run on standard D-cell batteries for up to 1,600 hours. D61XWE control panel, for Defender 6000 in stainless steel. Bar matrix display, cut resistant keyboard with dedicated keys for quick product changes and touchless sensor. They offer several connectivity options, including standard RS232 and integrated USB host. Optional: RS232/RS485/USB, analog output, Wi-Fi/Bluetooth, Ethernet and discrete I/O with relay. XWE models run on standard mains power, and optional external USB power bank support is available (up to 55 hours with 20,000mAh power bank). Models without column, Defender 6000 Front Mount Models without column, only with the DT61PW control panel, are also available for the Defender 6000 Hybrid. APPLICATIONS Weighing: Determine the weight of items in the selected unit of measure. Parts Counting: Count items of uniform weight. Advanced auto-optimization software recalculates the average piece weight as the overall weight increases. Checkweighing/ Checkcounting: Compare the weight of an item against target limits. Compare the count of a package against target limits. Bar matrix or 3-color check light display give clear and bright indication of weight. Percent Weighing: Display the weight of an item as a percentage of a pre-established reference weight. Dynamic Weighing and Display Hold: Take an average of weights for an item over a period of time to account for vibration or other interference. The Display Hold feature manually or automatically holds the last stable weight of an item on the display. Available only in the i-D61XWE models: Filling: Fill a container to a target weight. 3-color bar matrix displays filling status. Connect with Discrete I/O option kit for an auto-filling system. Library and User Management: Up to 300 library items (stores part number, tare weights, APWs, under/over limits, set points or reference weight) can be shared within different weighing modes. Up to 100 user IDs can be stored for secure user access and traceability Resistance and practicality The Defender 6000 scale features a 316 stainless steel platform and frame, and an advanced wet-weather indicator with IP68/IP69K rating and hermetically sealed load cell, as well as a cut-resistant front panel. Plus, NSF Certified and USDA-AMS Approved; supports HACCP systems, for environments related to food safety. The scale can withstand any mishap, from food splashes to chemical splashes, and is sturdy enough to be washed down with a high pressure washer. Resistant to intensive washing typical of processing and packaging environments. Plus: 150% overload protection, password menu protection, menu and key lock, stability indicator, overload/underload indicators, low battery level indicator (i-DT61PW models), auto power off and automatic tare. A dedicated target key allows you to quickly configure over/under weight of packs, speed up line changes and simplify and customize templates for data printing. In the video: How to use the 'checkweighing' mode. In the video: How to use the 'fill' mode.

Electronic micropipette BioHit ePET. brand new Volume: 50-1200 ul. One channel. Increase 10ul. Accur (more)acy (+- 0.50%) self-Calibration, microprocessor. Controls are lightweight and ergonomically designed to reduce the risk of RSI. Disposable tips. Charger direct. Pack includes, pipettor, grease, filters and forceps, certification ISO and manual. Left-handed and right-handed Specifications: Tips Disposable tips, and modules made with natural color of polypropylene. Tips without filters packaged in trays spacer that are autoclavable (121°C, 1ATM) Package • Pipettor • Grease • Filters and forceps filter • Instructions for use •Certificate of management ISO 8655-6 Other characteristics Volume: 50-1200 ul. Accuracy: +- 0.50% Quality All the pipettes have been tested according to ISOL 8655 and have received the Hsigh (Konformitätsbescheinigung, DIN 12600) printed on each pipet.. The quality control to ISO 8655 involves the tested concentration of each pipette with distilled water (quality 3, ISO 8655-6) at 22°C using tips original Biohit. Battery

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 100 g), wooden box Number of p (more)ieces in the set: 21 Weights 1 g i 2 g &ndash; solid masses without adjusting chamber

Motic BA310 Digital LED Compound Microscope Magnification Range 4x to 100x Optical System Colour Cor (more)rected Infinity (CCIS) Illumination Koehler 3W LED Features - Binocular head Siedentopf type, 30º inclined with built-in digital camera CMOS 1/2” chip - 3MP - 2048x1536 pixels with USB2.0 output - Widefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces, with rubber eyecups - Reversed quintuple revolving nosepiece - CCIS EF-N Plan Achromatic objectives EF-N PL 4X, 10X, 40X S, 100X S Oil - Coaxial coarse and fine focusing system with tension adjustment - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.90/1.25 with iris diaphragm and slot - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The new Motic BA310 Digital LED Compund Microscope is designed for the rigors of daily routine work specifically for diverse applications in Hematology and Cytology. The BA310 Digital is a version of the BA310 featuring a built-in 3.0MP sensor. The demands placed on any routine microscope for daily work needing careful focus on every microscope detail. The new BA310 series features a powerful adjustable light source to meet both delicate and detailed lighting requirements for all sample types while the fully featured Koehler illumination helps in highlighting even the weakest stained specimens. New CCIS EF-N Plan Achromat objectives provide optimal image contrast through newly designed multi-layer lens coatings. Click Here to View Product Video INCLUDED: The Motic BA310 Digital LED Compound Microscope includes: - Widefield high eyepoint eyepiece N-WF10X / 20mm with diopter adjustment - Built-in Digital Live Hi-Res Imaging Camera (5MP Resolution USB 2.0) - Reversed quintuple revolving nosepiece - CCIS EC Plan Achromat Objectives 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.9 with iris diaphragm and slot - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Koehler illumination 3W LED with intensity control - Motic Images Plus 3.0 for PC and MAC - Calibration Slide - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 Eppendorf 7x50ml Buckets for A-4-81 Rotor (more), Cat # 022638614. This is a 4 piece set, and the adapters are new in the packaging. The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 are for the A-4-81 Rotor in the 5810/R Centrifuges. INCLUDED: The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 includes: - Full 6 Month Parts and Labor Warranty

Inline User-Fillable Kit and Prep Kit are used to deliver reagents and solutions on the VENTANA Benc (more)hMark Series automated slide stainers (BenchMark, BenchMark GX, BenchMark XT, and BenchMark ULTRA). The dispenser in the kit is intended for single use only. Ventana has not validated the cleaning of these dispensers and re-use with a second reagent. This product is intended for in vitro diagnostic (IVD) use. Set containing a prep kit 1 through 10