Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab (more) where it was surplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump This was removed from  (more)a university lab where it was surplus to requirements. The system powers up but has not been tested further at our facility. It is in very good cosmetic condition with minor marks. Included are; ThermoFinnigan Autosampler SurveyorModel: AutosamplerSerial#: 77184Year: 2002 ThermoFinnigan PDA Detector Model: PDA DetectorSerial#: 56847Year: 2002 ThermoFinnigan LC Pump SurveyorModel: Surveyor MS PumpSerial#: 62911Year: 2003

A Simple Western size assay is an automated Western – no gels, no transfer devices, no blots, no fil (more)m and no manual analysis. Simple Westerns take place in a capillary. Wes automates all steps of the process for you including sample loading, protein separation, immunoprobing or labeling, washing, detection and data analysis. Up to 25 samples can be processed in a single run. Wes performs Simple Western size-based assays: Immunoassay and Total Protein assay. All you have to do is pipette your samples and immunoreagents into Wes’s pre-filled plate, load the capillary cartridge and press start. Sample Required Total Protein: 0.3-1.2 µg lysate Sample Required Immunoassay Charge: 0.6-1.2 µg Volume Required Total Protein: 3 µL/well Volume Required Immunoassay Charge: 3 µL/well Size or pI Range Total Protein: Molecular weight (MW) ladders range from 2-440 kDa Size or pI Range Immunoassay Charge: Molecular weight (MW) ladders range from 2-440 kDa Sizing CV Total Protein: <10% Sizing CV Immunoassay Charge: <10% Intra-assay CV Total Protein: <15% Intra-assay CV Immunoassay Charge: <15% Resolution (± percent difference in MW) Total Protein: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Resolution (± percent difference in MW) Immunoassay Charge: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Quantitation CV Total Protein: <20% Quantitation CV Immunoassay Charge: <20% Dynamic Range Total Protein: 2-3 logs Dynamic Range Immunoassay Charge: 3 logs Sensitivity Total Protein: ng Sensitivity Immunoassay Charge: Low pg Capillary: 5 cm, 100 µm, 400 nL Dimensions (HxWxD): 360 x 360 x 570 mm Weight: 23 kg

Edwards Model E2M2 Rotary Vane High Vacuum Pump 2 Two stage Lab This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and draws suction but has not been tested further. It is in reasonably good cosmetic condition, with some marks from use.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 5 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.