Clean Air CA/Rev 4 Biological Safety Cabinet

The Esco Infinity Class II Biological Safety Cabinet (BSC), model FC2, offers superior protection to (more) the cabinet operator, product and the environment. With over 20 years of experience in safety cabinet technology, the Esco FC2 cabinet brings you the optimum combination of safety, performance and serviceability with an enhanced ergonomic design. Class II cabinets provide product, operator and environmental protection making them suitable for general microbiological work with agents assigned to biosafety levels 1, 2, and 3. With their diverse range of applications, class II cabinets are the most cost-effective systems on the market. The Infinity Class II BSC is designed, built and tested to comply with Australian Standard AS 2252.2 performance requirements and European Standard EN12469. External Dimensions (LxWxH): 1420 x 805 x 1535 mm Internal Work Zone (LxWxH): 1260 x 610 x 670 mm Tested Opening: 175 mm Inflow Initial setpoint: 1.10 m/s Downflow Initial setpoint: 0.41 m/s HEPA Filter Efficiency: >99.99% at 0.3µm Sound According to EN12469: <65 dBA Fluorescent Lighting: >1200 Lux, measured at work surface level (zero background) as per NSF49 test grid UV-interlock ensures that the UV lamp is deactivated when the sash is not fully closed. Main Body Construction: 1.2mm thick gauge electro-galvanised steel with Isocide anti-microbial white oven-baked epoxy-polyester powder-coated finish Net Weight: 298 kg

The Mars is a series of dual filter Class 2 cabinets which incorporates the latest in laminator tech (more)nology, energy- saving designs and HEPA-filtration, with options that give the best protection for you, your products and your laboratory. Down flow, air velocity: 0,28 ± 0,01 m/s Inflow, air velocity: 0,45 m/s Exhaust, air flow rate: 389 m³/h Light illuminance (flourescent tube): > 2000 Lux Front opening (height): 200 mm UV-C sterilisation Dimensions (DxWxH): 797 x 1304 x 2033 mm Internal dimensions (DxWxH): 480 x 1200 x 700 mm Weight: 192 kg

Air speed: 0.36 m/s Light intensity: 1150 lux Pre-filter (EN 779): G3 Down HEPA filter (EN 1822): H1 (more)4 Emissions HEPA filter (EN1822): H14 Dimensions (WxDxH): 1374 x 794 x 1602 mm Internal dimensions (WxDxH): 1180 x 550 x 744 mm Height with base: 2267/2367 mm Working opening height: 175/330 mm Weight: 215 kg

Recirculation air volume: 725 m3/hExhaust air volume: 383 m3/hTotal air volume: 1348 m3/hIn flow: 0. (more)45 m/sStandard lighting : 2x 36 WInternal dimensions (WxDxH): 1190 x 600 x 655 mmDimensions (WxDxH): 1280 x 790 x 2180 mmWeight: 240 kgEquipped with:Adjustable ellectric base stand (225 mm range)UV light

Type CA/REVS6 Prefilter 40 168cm DIN 12950 T Downflow filter: 18P6+ Exhaust filter: 7P6+ Counter: 78 (more)943.72h 129 x 83 x 222cm Outside Dim: 1480 x 1900 x 860 mm Internal Dim: 690 x 1800 x 600 mm Frame height: 755 mm The sterile air flow in the cabinet keeps the material free from contamination and pollution (product protection); the downflow also provides reasonable protection against cross-contamination during the experiment. Due to the intake of air from the laboratory room, a protective air curtain is created at the front of the cabinet (personal protection).

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (LxD (more)xH): 1943 x 844 x 1552 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight: 315 kg

Displacement (50Hz): 504 l/min Speed (50 Hz): 25 m3/h Nominal rotation speed (50Hz): 1500 rpm Ultima (more)te vacuum (partial): 10-4 mbar Ultimate vacuum (total pressure) without gas ballast: 2 x 10-3 mbar Ultimate vacuum (total pressure) with gas ballast: 1 x 10-2 mbar Max permitted pressure at outlet: 0.5 bar Max inlet pressure for water vapour: 30 mbar Max water vapour pumping rate: 0.55 kg/h Oil capacity: 0.5 – 1.0 l

The G 7883 washer-disinfector is suitable for reusing laboratory glassware for analytical experiment (more)s in, for example, industrial, environmental and research laboratories. This appliance has a large two-tier wash area and can be built-in under a continuous worktop or used free-standing. After an intensive main cleaning phase, disinfection takes place at >90°C and a storage time of 5 minutes. The final rinse is performed with deionized water without rinsing agents. Control/programs: Multitronic Novo Plus control (certain process parameters can be changed), with 10 standard cleaning programs Program operation/display: Operation via one-button program selector, display of program cycles, display of temperature and program duration, display of program end, optical and acoustic signal, indicator lights for service and fault messages Cleaning mechanisms: Rotating: two spray arms on top and bottom of the chamber, third spray arm on top basket. Dosing devices: Valve dispensers for powdered detergent and liquid detergents. Circulation pump: 400 l/min Temperature: Freely adjustable up to 93°C Drain: 1 drain hose Drying capacity: Gravity convection drying system, 10 minutes. Can be turned on or off in any cycle Water connection: 1x hot water, 1x cold water, 1x purified water Dimensions (WxDxH): 600 x 600 x 850 mm Weight: 74 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet