IKA RCT Basic Heated Magnetic Stirrer Heizrührer Magnetrührer

SUITABLE FOR EVERY LABORATORY NEED The AREX magnetic stirrer is a great tool for basic laboratory ap (more)plications, but with the optional VTF system, which allows you to thermoregulate the sample up to 300°C with an accuracy of ± 0.5°C, it will be possible also use it for more complex applications. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, an indicator light remains on until the plate temperature drops below 50°C. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. PRECISE SHAKING ARE 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. APPLICATIONS ARE 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 100 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

Selecta Agimatic-S magnetic stirrer. with Analog, without heating, 145 mm Ø upper plate, 10 L stirri (more)ng capacity and adjustable speed from 60 to 1600 r.p.m. electronic regulation. Stainless steel. The Selecta Agimatic C-S 7000242 shaker is high quality and performance laboratory equipment. Designed to efficiently and precisely mix and stir liquids, this stirrer is ideal for applications in chemistry, biology and other scientific disciplines. With a stirring capacity of up to 500 mL, this shaker features an adjustable stirring speed and a programmable timer to suit the specific needs of each experiment. Additionally, its compact and rugged design ensures long life and reliable operation. The Selecta Agimatic C-S 7000242 shaker is an indispensable tool for any laboratory that requires efficient and precise mixing and stirring of liquids.

The VELP stirring rod with turbo propeller is ideal for medium / high viscosity ranges and medium /  (more)high speeds. Compatible with Velp Scientific ES, LS, DLS, LH, DLH, PW, OHS rod stirrers. The stirring rod generates an axial flow with suction of substances from top to bottom and low shear forces.

Metrohm stirrer E 649.

Cabinet for the storage and isolation of poisons, toxic chemicals and CMRs. Made entirely of FE P01  (more)electro-galvanized sheet steel (Skin passat), thickness 10/10 mm, cold press bent and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C. - 2 plastic-coated steel shelves (max load 5 kg evenly distributed) - Double layered swing door, lock and key - Opening of the doors with an angle greater than 110° which allows the extraction of the shelves without having to tilt them - Predisposition for wall mounting - Possibility of fixing in a safety cabinet (on the shelf or on the back wall of the cabinet) - Locking with safety lock and key - Can be used as a wall unit to store harmful products or inside a 1- or 2-door wardrobe - Safety symbols indicating the presence of poisons inside

This Illumina HiSeq 2500 Genome Sequencer was removed from a university lab where it was surplus to  (more)requirements. It powers up and is in excellent cosmetic condition with minor marks. We were unable to test it further without the PC. Accessories: 18 x BD Plastic Vials:Volume, 14ml 2 x VWR Plastic Tubes:Volume, 15ml 16 x ICB Instrument TubesVolume 250ml Cables: 2 x Intercon 1 Cables:'T7500 CAMERA'#1, #2REV Ano. 15023088Cat no, 57133 1 x DVI Cable: 2 x USB Cables:

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Hermle 50ml Insert for Z306-100 Rotor (2pk) The Hermle 50ml Inserts are for use with the 4 x 100ml S (more)wing Out Rotor for the Z306 Centrifuge. INCLUDED: The Hermle 50ml Insert for Z306-100 Rotor (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty