Esco Infinity FC2 Biological Safety Cabinet

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions - D54 W106 H70cm

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions - D54 W106 H70cm

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

Envair Bio 2+ Class 2 Microbiological Safety Cabinet This was removed from a laboratory where it was (more) surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx55 Wx106 Hx70cm

BioiMAT1 Ducted Exhaust Type Class I Microbiological Safety Cabinet 1,500mm Wide This item is sold o (more)n behalf of a Client. It is surplus to requirement. It is in brand-new condition and remains in its original packaging. Specifications; - Compliance with BS EN 12469:2000. - Exhaust type cabinet with single H14 EN1822 standard HEPA filter exhaust (99.999% efficiency). - Anti blowback damper. - Photometer access at the exhaust HEPA filter discharge side. - Cabinet width of 1500mm. - Fit into a room with a ceiling height of 2.35 meters, with a 250mm clearance. - Manually operated, downward-opening front visor of 5mm toughened glass. - 100% sealable night door/closure panel. - Manual shut-off damper. Further information regarding the items specifications is available on request. This item is available for collection from Dundee, UK, but we may be able to offer shipping for an additional fee. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Pre filter: G3 (EN 779), 1760 x 445 mm Donflow filter: Astrocell HEPA 18P6+, 610 x 1830 x 69 mm, H14 (more) acc. EN 1822 Exhaust filter: Astrocell HEPA 7P6, 762 x 610 x 69 mm, H14 acc. EN 1822 Average downflow speed (work mode): 0.36 m/s Average downflow speed (standby mode): 0.10 – 0.20 m/s Average inflow speed in whole front aperture: >0.5 m/s Exhaust airflow 600 m³/h Lighting: TL-high output and UV-C Front aperture (work mode) (HxW): 165 x 1800 mm Front aperture maximum height: 350 mm Interior dimensions (HxWxD): 725 x 1800 x 605 mm Exterior dimensions (HxWxD): 1552 x 1943 x 844 mm Support frame height: 745 mm Weight: 315 kg

Adam Equipment PMB 53 Moisture Analyzer, 50g, 0.001g/0.01% Capacity 50g Readability 0.001g / 0.01%  (more)Weighing Units g, %M, %S, ATRO %M, ATRO %S Features - Vivid, backlit LCD easily visible in any lighting conditions - Programmable backlight can be set to "always on," "always off" or "light only when weighing" - Capacity tracker built into display for easily monitoring possible overloads - Scratch-resistant aluminum housing protects internal components - Color-coded keys facilitate quick recognition of the most frequently used buttons - Pan lifter allows easy placement and removal of samples - RS-232 interface provides speedy connection to computers and printers along with a USB host for memory card and USB I/O interface - Temperature range 50°C to 160°C in one-degree increments - Three settings for heating samples include ramping, stepped temperatures and single temperatures - Seven preset drying modes allow test routines for several products - Audible overload alarm warns when capacity is exceeded - Testing can be set to start automatically when lid closes - Calibration for temperature and weight - Multilingual display permits use in various regions - Quick and easy configuration using the keypad - Zero-tracking feature ensures display returns to zero reading - Internal memory stores 49 different recipes and up to 99 test results, while additional test results and settings can be stored on a flash drive - Security slot for optional lock and cable to help prevent theft With simple operation and rapid response time, the Adam Equipment PMB Moisture Analyzers offer the top value in their class. The automatic test-setting function enables easy recall for frequent testing of the same items without additional user programming. USB and RS-232 interfaces provide computer and printer connections to store test programs and results. There is no need for additional software to take readings, giving users total freedom to collect data on a production floor or in the field. A single 400-watt halogen bulb heats samples in 1 °C selectable increments. Three heating options give users the flexibility to customize test methods and temperatures for different materials. The PMB Moisture Analyzers can be used to accurately determine the moisture content in food samples, oils and creams. These analyzers are suitable for cosmetics, agriculture, food testing and science laboratories. INCLUDED: The Adam Equipment PMB 53 Moisture Analyzer, 50g, 0.001g/0.01% includes: - Pan Support - Stainless Steel Lower Chamber Insert - Sample Pan Lifter - 10 x Sample Pans - RS-232 Interface Cable - USB to PC Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Edwards nEXT930D - ISO-K200 NW25 Turbomolecular Pump Ultimate Vacuum <3.5x10-9 mbar Inlet Connect (more)ion DN 200 ISO-K Pumping Speed Nominal 5549.99 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. With the nEXT930 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 925 l/s.INCLUDED: The Edwards nEXT930D - ISO-K200 NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

IKA Eurostar 100 Control P4 Overhead Stirrer Speed Range 10 - 300 RPM Viscosity Max. 100,000 mPas  (more)Stirring Quantity Max. 100 l Features - Reverse function - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Quiet operation - Error code Display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery The extremely powerful laboratory stirrer EUROSTAR 100 control P4 with a removable wireless controller and a digital TFT display is especially suitable for highly viscous applications and provides a torque of up to 320 Ncm. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/10 - 300 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. Furthermore, an integrated torque trend display is provided for the measurement of viscosity changes and its electronic safety circuit ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 100 Control P4 Overhead Stirrer includes: - EUROSTAR 100 control P4 - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 100 Control P4 Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)100 lMotor rating input174 WMotor rating output142 WMotor principleBrushless DCSpeed displayTFTSpeed range10 - 300 rpmReversible direction of rotationyesIntermittent operationyesViscosity max.100000 mPasOutput max. at stirring shaft 100 WPermissible ON time 100 %Torque max. at stirring shaft 320 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 10 mmFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque3.20 NmTorque measurementtrendDeviation of torque measurement I30 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 352 x 230 mmWeight5.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input150 W DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

This item has just arrived in our stock. Please enquire for further details.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).