Waters Aquity H-Class UPLC

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

Solvent delivery method: Parallel-type double plunger Plunger capacity: 10µL Maximum discharge press (more)ure: 40MPa Flow-rate setting range: 0.0001 to 10.0000 mL/min Flow-rate accuracy: No more than 1% or 0.5µL/min, whichever is greater (0.01 to 2 mL/min.) Flow-rate precision: No more than 0.06% RSD or 0.02 min SD, whichever is greater Pulsation: 0.1 MPa (for water at 1.0 mL/min. and 7MPa) Constant-pressure solvent delivery: Supported Plunger rinsing mechanism: Manual rinsing or automatic rinsing using optional product Safety measures: Liquid-leakage sensor, high-pressure/low-pressure limits Gradient type: Low-pressure mixing Number of mixed solvents: 4 max Dimensions (WxHxD): 260 x 140 x 420 mm Weight: 10 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 1 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

The Memmert BE 300 is ideally suited for all applications with temperatures up to 70°C in research,  (more)medicine, pharmacy and food analysis, as well as food chemistry. It is especially useful for incubating live cultures at 37°C. The incubator is equipped with manually regulated air flow. Temperature range: Ambient temperature +5°C to 70°C Internal glass door for observation Convection: natural Capacity: 39 L Dimensions (WxDxH): 630 x 430 x 600 mm Internal dimensions (WxDxH): 480 x 255 x 320 mm Weight: 30 kg

Edwards T-Station 300D Wet Turbo Station CF100, 100-120V Ultimate Vacuum &lt;5x10-12 mbar ls-1 Inlet (more) Connection DN 100 CF Leak Tightness &lt;1x10 6 mbar l/s Features - Single dedicated button to start/stop pumps; Easy to read accurate display; - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable. - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking. - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application. Edwards T-Station 300 turbomolecular pumping station buildson the existing popular T-Station 85 platform by replacing the nEXT85Hturbomolecular pump with the nEXT300 turbomolecular pump we have extended ourportfolio and are providing a solution for customers and applications that requirea higher pumping speed up to 300 ls-1. Offering higher pumping speeds of up to 300 ls⁻¹, this solution caters to applications that demand rapid and efficient performance. The pump's cost-efficient package features a compact, modular design, ensuring both affordability and adaptability for diverse setups. Its plug-and-pump design provides a user-friendly experience, requiring no systemization or additional air cooling, and comes fully assembled for quick operation. Built with a robust, low-profile all-metal frame, it withstands rough handling and features a base plate with rubber feet for added stability. Additionally, the pump is designed for easy user serviceability, minimizing downtime and lowering the cost of ownership by allowing straightforward maintenance. INCLUDED: The Edwards T-Station 300D Wet Turbo Station CF100, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT300D Turbomolecular Pump with CF100 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

Low profile laboratory orbital shaker with large mounting surface and load capacity of up to 15 kg.  (more)Infinitely variable speed control from 0 – 300 rpm Digital display Orbital diameter 30 mm Ideal for vessels with a volume of more than 250 ml, e.g. round flasks, Erlenmeyer flasks, culture flasks and bottles Ideal for biological and microbiological growth tests and for production of stock solutions Continuous operation (endless) even under extreme loads Timer function Type of movement: orbital Shaking stroke: 30 mm Permissible shaking weight (incl. attachment): 15 kg Permissible ON time: 100 % Speed range: 0 – 300 rpm Speed display: 7 segment LED Timer: yes Timer display: scale Time setting range: 1 – 55 min Operating mode: timer and continuous operation Dimensions (WxHxD): 505 x 120 x 585 mm Weight: 26 kg Equipped with a AS 501.1 Universal attachment

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW