Siemens 3UF7112-1AA00-0 Strom-/Spannungserfassungsmodul Einstellstrom 10...100 A

Labconco 750ml Complete Flask, Catalog # 7541100Complete Flask consists of 7542700 Flask Bottom, 754 (more)4400 Flask Top and a supply of filter paper. Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. They are available in clear or amber colored glass. A complete Fast-Freeze Flask consists of a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are available in borosilicate glass or stainless steel. Fast-Freeze Flasks and Adapters are compatible with any brand freeze dryer that has 1/2" or 3/4" diameter valve ports. Glass flasks withstand maximum temperature of 490º C. Flask toppers withstand a maximum temperature of 450º C. INCLUDED: The Labconco 750ml Complete Flask, Catalog # 7541100 includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson Sound-proof EnclosureAlthough ultrasound is above the audible range of the human ear, mechan (more)ical noise occurs when liquids are treated ultrasonically. The noise may be disturbing in a room with low ambient noise level if exposed for prolonged periods of time. Operating the Sonifier® in the Soundproof Enclosure can minimize mechanical noise produced by ultrasonic processing. The sturdy cabinet is lined with waterproof, sound-absorbing material, which is impervious to most solutions or laboratory regents and can be easily cleaned. A fully-transparent door enables viewing of the process while limiting the noise to an acceptable level. The decibel rating will lower by 20-25db. Openings at the top and bottom of enclosure make for easy access for use with either a cup horn or standard probes. Comes with inside column and adjustable clamp plate. Side panel allows for placement of horns, tips and manuals. INCLUDED: The Branson Sound-proof Enclosure includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Vinitex 4 Drawer cabinet high White 600

Waters Micromass EMD 1000 Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device feature (more)s a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes. Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. The calibration procedure for a 12-channel pipette takes less than 20 minutes, not six hours, on this instrument. When purchasing the AP-12.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, two pumps: a single-channel pump and a four-channel pump The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

IKA Microstar 15 Digital Overhead Stirrer Stirring quantity max. (H2O) 10 L Speed Range 0/50 - 100 (more)0 rpm Viscosity max. 8000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design.Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: INCLUDED: The IKA Microstar 15 Digital Overhead Stirrer includes: - MICROSTAR 15 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Microstar 15 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)10 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 1000 rpmViscosity max.8000 mPasOutput max. at stirring shaft15.7 W Permissible ON time100 % Torque max. at stirring shaft15 Ncm Speed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.15 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)60 x 173 x 126 mmWeight1.26 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Voltage range van 0-300 V. Ampere range van 0-100 mA. Power: 55 VA. Dimensions (H x W x D): 98 x 220 (more) x 180 mm.

4 measuring channels Weight: 6.3 kg Dimensions (wxhxd): 35.5 x 12 x 45 cm 220-240V, 50-60 Hz, 45 VA, (more) 0.4 Med 6 V See documentation for more information.