Shimadzu LC-20AD HPLC Pump

This item has just arrived in our stock. Please enquire for further details.

This was removed from a university lab where it was surplus to requirements. The lab informed us tha (more)t it was in use until December 2022 and was fully serviced by Waters up to Feb 2023. All modules are in excellent cosmetic condition with only minor marks from use. Included are; 1 x Waters Sampler ManagerPart Number: 186016007S/N: J10NPS 788M The unit powers up but we were unable to test it further at our facility. This unit does include 2x part number 418000179 vile trays.  1 x Waters Binary Solvent ManagerPart Number: 186016002S/N: H10NPB 923NThe unit powers up, the flow light flashes red, green, and then turns off. We were unable to test it further at our facility. 1 x Waters Auxiliary Solvent ManagerPart Number: 186016021S/N: H10NPA 505NThe unit powers up but the flow light does the same as the binary manager. We were unable to test it further at our facility. There is also a network switch on the top of the stack. It is untested. It comes with 5x sealed bagged "nano inlet filter 5 micron", part number: 289002172 with dates on the bags ranging from 2011 to 2020. A set of bagged tubes that are labelled as "solvent aux".

Nahita Quartz water distiller. Production 4 L/h. Conductivity at 20ºC 2 µS/cm. Water consumption 1.0 (more) l/min. Made of borosilicate glass. Quartz heater to obtain high purity water. With safety device (flow sensor). Resistance 1x 2500 W. User manual. The Nahita Quartz automatic water distiller. and continuous production, with quartz resistance, it provides us with high quality distilled water given the great purity of the water obtained, free of metal ions and pyrogenic substances, suitable for the preparation of reagents, bacteriological culture media, final washing of glass etc It is made entirely of high quality borosilicate glass, which allows continued use of the equipment and guarantees its durability. It has a safety mechanism that automatically disconnects the quartz resistance when the pressure of the cooling water decreases, and connects it again when it recovers. It has a support adapted for coupling to the wall and its reduced dimensions allow easy handling and cleaning. The equipment finds its application in clinics, hospitals and laboratories in general, located in the research departments of agri-food, pharmaceutical, environmental companies, etc. as well as in schools and universities. In case of deterioration, accidental breakage, etc, of the parts that make up the equipment, the following components are available below for replacement:

Fungilab Thermovisc 100-F8 Refrigerated Re-Circulation Thermostat. Working volume 8 L. Range -10 to  (more)+ 100 ° C. Integrated cooling unit for measurement at 20 ° C without external cooling by circulating water. Stability ± 0.05 ° C to 100 ° C and ± 0.1 ° C to -10 ° C. Construction adapted to the rotary viscometer Fungilab: the measuring head fits perfectly on the sample holder. Integrated support for 2 beakers 600 mL. Opening 94 mm with locking device. Used to thermostate a second sample while measuring on the first. User manual.

Solvent delivery method: Parallel-type double plunger Plunger capacity: 10µL Maximum discharge press (more)ure: 40MPa Flow-rate setting range: 0.0001 to 10.0000 mL/min Flow-rate accuracy: No more than 1% or 0.5µL/min, whichever is greater (0.01 to 2 mL/min.) Flow-rate precision: No more than 0.06% RSD or 0.02 min SD, whichever is greater Pulsation: 0.1 MPa (for water at 1.0 mL/min. and 7MPa) Constant-pressure solvent delivery: Supported Plunger rinsing mechanism: Manual rinsing or automatic rinsing using optional product Safety measures: Liquid-leakage sensor, high-pressure/low-pressure limits Gradient type: Low-pressure mixing Number of mixed solvents: 4 max Dimensions (WxHxD): 260 x 140 x 420 mm Weight: 10 kg

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 100 g), wooden box Number of p (more)ieces in the set: 21 Weights 1 g i 2 g – solid masses without adjusting chamber

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 200 g.

OMNITIP™ BT 10 µl tips for pipettes are high quality laboratory accessories designed for (more) precision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 10 µl Colour: transparent Set contains 1000 tips in a plastic bag with a zipper closure Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

IKA HBR 4 control Heating Temperature Range room temp. - 200 °C Speed range 150 - 800 rpm Filling vo (more)lume max. 4 l Features - Cylindrical heating bath with integrated base heating elements, accommodating low-viscous oil or water as heat transfer media - Features a useful volume of approximately 4 liters and a 1000 W heat output for efficient heating up to 200 °C - Equipped with two carry handles, an infinitely variable safety temperature limiter (DIN 12877), and double-jacketed mantle for burn protection - Digital display shows target, actual, and safety temperatures alongside speed, with an integrated magnetic stirrer drive for optimal heat distribution The heating bath features a cylindrical shape with heating elements integrated into the bath base, suitable for use with low-viscous oil or water and has a useful volume of approximately 4 liters and a heat output of 1000 W. It is equipped with two carry handles, an infinitely variable safety temperature limiter, and a double-jacketed mantle for burn protection, alongside a digital display for monitoring target, actual, and safety temperatures. An integrated magnetic stirrer drive enhances the heat distribution within the bath by circulating the tempering fluid. Additionally, the bath includes an RS 232 interface for connectivity and supports the use of an external temperature sensor for precise temperature control directly in the medium.INCLUDED: The IKA HBR 4 control includes: - HBR 4 control - PT 1000.60 Temperature sensor, stainless steel - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 The Eppendorf 6 x 15ml (more) Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 are for use with 90mL rectangular buckets in the Eppendorf A-4-38 Rotor. These adapters feature a capacity for 6 x 15ml round bottom tubes, each with maximum tube dimensions (Diameter x Height) of 17.5mm x 100mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366Bottom ShapeRound BottomRotor CompatibilityA-4-38 Swing Bucket Rotors