VWR MICRO STAR 17 centrifuge with fixed rotor 75003424

Mini laboratory centrifuge 846070 for GREINER Bio-One microplates New equipment in its original pack (more)aging Speed: 2,550 rpm (16,022.1 rad.min-1) Capacity: 2 Microplates

Embossed foil keypad for simple operation Short-spin function with pre-selected rotational speed rpm (more) or rcf settings as required (from 500 rpm in steps of 100 rpm) Timer up to 99 min or continuous run Soft key for gentle acceleration and deceleration Automatic imbalance detection Equipped with a Eppendorf F-45-30-11 fixed angle rotor. Rotor has a 30x 3,75 g capacity and a max rpm of 14000. Max. rotational speed: 14,000 rpm Max. load: 30 x 2.0 ml Safe-Lock Microcentrifuge Tubes Max. density of material to be centrifuged: 1.2 g/ml Max. kinetic energy: 6,100 Nm Dimensions (HxWxD): 228 x 310 x 430 mm Weight: 17 kg

Eppendorf Refrigerated Centrifuge 5804 R Lab This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition but does not power on, therefore we are unable to test it further, and it is listed as Spares/Repair. The control board is faulty, and is loose inside the chamber. There is no rotor.

Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor Speed Range 200 to 13,500 RPM (more) Max. Capacity 8 x 5ml Temperature -20°C to +40°C Features - The next generation touch control panel is user-friendly even with gloves - High-speed centrifugation reaches up to 13,500 RPM and 16,800 xg - Real-time RPM and RCF conversion ensures accuracy - Program storage allows saving up to 99 programs - Unique status indicator light shows the running, standby, or completed status - Compact design with a powerful motor drive reaches speeds up to 13,500 RPM - Refrigeration cools down to 4°C in less than 10 minutes - Quiet operation even at full speed Benchmark’s flagship MC-24R refrigerated microcentrifuge features a next-generation touch control panel, high-speed centrifugation (up to 13,500 rpm / 16,800 xg), and compatibility with the unique COMBI-Rotor™ (sold separately), which accepts both standard microtubes (1.5/2.0 ml) and PCR tubes/strips (0.2 ml), eliminating the need for a dedicated PCR strip/tube rotor. These features make it an ideal choice for any molecular biology laboratory. The MC-24R offers an optional hermetically sealed rotor and a four-place PCR strip rotor. It also includes adjustable acceleration/deceleration rates, real-time rpm and rcf conversion, program storage for up to 99 runs, and a status indicator light, which informs the user if the unit is running, in standby, or has completed a run. Compact and convenient, the MC-24R is perfectly suited to be the workhorse of any lab. INCLUDED: The Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex DM1424 Hematocrit CentrifugeThe DM1424 Hematocrit Centrifuge with AC24P rotor is used for d (more)etermination of volume fractions of erythrocytes in blood and also for separation of micro blood and solutions. The DM1424 conforms to international safety standards and regulations.The SCILOGEX DM1424 centrifuge is certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including explosion-proof and bio-safe tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. Features: High accuracy of speed, excellent performance CPU controls all operating parameters including speed and time RPM or G-force can be set and displayed Operation can be timed from 30 seconds to 99 minutes or continuous running Timer commences once the set speed is reached, so the separation time is more accurate Gentle braking at low speeds with efficient separation Parameters can be modified after the set speed is reached Quick spins are possible by pressing and holding PULSE key Automatic release the lid when operation has stopped to save processing time Easy-to-read backlit LCD processing display and sound alert Can be pulse accelerated and held at speed High strength aluminum hematocrit rotor included (optional fixed angle rotor for 1.5/2.0ml tubes) Brushless motor drive quickly and effortlessly accelerates the rotor to set speed 2 YEAR WARRANTY Click Here to View Product Video INCLUDED: The Scilogex DM1424 Hematocrit Centrifuge includes: - AC24P Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab This item was removed from a university (more) where it was surplus to requirement. The unit appears to be functioning well and can also be controlled via the free MicroManager software. It is in good cosmetic condition. It does feature the following: 2x Eyepieces PL 10 x 25P/N: 44 40 34 2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17P/N: 44 03 51P/N 44 03 50 1x Zeiss FLUAR 100x/1.30 oil ∞/0.17P/N: 44 02 85 1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17P/N: 44 04 60 1x Carl Zeiss HAL 100 12v 100w lamp houseP/N: 1039-685 1x Zeiss Reflector Turret with 6 filters1x FITC 1x TRITC1x YFP1x CFP1x Cy51x DAPI

KNF N816.1.2 KT.18 vacuum pump. Diaphragm pump and compressor for slightly corrosive vapors and gase (more)s. Without oil. Flow rate L/min 30. Max. allowable operating pressure 0.5 [bar g]. Maximum vacuum 160 mbar abs. Ambient and medium temperature +5 °C to +40 °C. It features PPS heads, PTFE-coated diaphragms and FFPM valves. Dimensions 361*141*102 mm. Weight 3.95 kg. User manual. The KNF N816.1.2 KT.18 vacuum pump is a highly efficient and reliable equipment used to generate vacuum in different industrial and laboratory applications. This vacuum pump features a compact and robust design, making it ideal for use in tight spaces. It is equipped with a powerful and silent motor that guarantees optimal performance and uninterrupted operation. In addition, it has a temperature control system that prevents overheating and prolongs the useful life of the equipment. This vacuum pump offers high air flow and excellent suction capacity, making it an ideal choice for applications requiring fast and efficient vacuum. In addition, it has an integrated air filtration system that guarantees the purity of the vacuum generated. In summary, the KNF N816.1.2 KT.18 vacuum pump is a reliable and efficient option for generating vacuum in industrial and laboratory applications. Its compact design, optimal performance and ease of use make it an indispensable tool for those who require a quality vacuum in their processes.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) Particularly in (more) the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® Crack 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, ideal volume: 1,900-6,300 ml. The VISCO JET® Crack 80 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty